Jump to content
HWBOT Community Forums

Leaderboard

Popular Content

Showing content with the highest reputation on 12/16/18 in all areas

  1. Usually, 55 is from RAM, so check the latencies, if you set them manually. Or increase RAM voltage a bit. Also you can try increasing the VCCIO and/or VCCSA voltage.
    2 points
  2. Do you mean like Gigabyte and every Australian XOCaroo ?
    1 point
  3. So I spent the afternoon on this, my intel OS tweaked a little more for AMD and tweaking memory more. So had my improvement sorted then ran these few below while making slight adjustments. Running only hypers atm as I wanted to work eff, CPU is on SS -30 and memory warm air.......Will run up PSC and more 4-5Ghz ,LN2 cpu and memory later as I get time
    1 point
  4. #1 sold, payment received, thanks
    1 point
  5. CPU #1 Box retail has been " SOLD " for $539US Dollars. CPU #2 OEM ( Tray ) Last price drop $519US Dollars , will be for sale for 3 days only , after 3 days from today i will close this thread and will sale it on ebay
    1 point
  6. RAM walls at 920-940MHz are absolutely normal for Deneb and there is nearly nothing you can do about it. Some newer boards like 990FX can do a dozen MHz more than 790FX but it won't give you a noticeable difference, especially that newer chipsets tend to be a little bit less efficient at the same clocks.
    1 point
  7. Tryed 1004 BIOS, after few days it looks much more stable and Skylake/Kaby Lake HT Bug fixed.
    1 point
  8. I thought that my oldest b die set was dead as well. Brushing it's teath with Aceton brought them back to life. Even 2133 crashed before cleaning them and 3600 c16 (stock) was not possible for weeks allready.
    1 point
  9. I noticed this too. Haven't played a lot with this board due to other problems and lack of time, but I was able to get 4133 12-11-11-28 1T bench stable with my old sticks. The key was DMI voltage. 1.3V seems to work ok for my system, but I haven't really used it a lot so far. Same observation for standby voltage though.
    1 point
  10. Anybody also see significant difference between Z170 and Z270 binned memory? Just tested 4133 C12-11-11 tight binned on Z170 kit and it can barely run 4000 tight in 32M. Another binned kit is OK... so it feels like that some kits don't like new platform?
    1 point
  11. Up for sale is my reliable benching set i used in last 2 years . I only sell these as a pack. #1 4133 Trident-Z 19-21-21 F4-4133C19D-16GTZA Best kit of 100 personal binning. Very low voltage kit, you are looking at 4000 12-11 1.81-2V and 4133 1.94V for s-pi 32m. wazza Together they do 4140 12-11 Wazza, one stick has low voltage tolerance for S-pi 32M so it stops at 4140 1.94V, the other stick is literally retard scaling up to 2.04V and reaching 4240. I don't have screens from the single channel testing but i will refund the buyer if this stick ( S/N ending 957) does not meet expectations. Geekbench scaling is good for both sticks ==> 4240 12 11 11 working easy The kit has original H/S mounted and never removed, they perform better when little cold and most likely with perfect temp control these results will be improved. I never removed H/S for warranty reasons. #2 4133 Trident-Z 19-25-25 F4-4133C19D-16GTZ Old and very rare kit, the first 4133 kits produced by Gskill, iirc only a dozen were up for sale. I bought these from a forum member and the h/s was removed before. After few weeks one stick died and G.Skill warranty sharp eye noticed the removal of h/s, so the warranty was denied. So one stick is dead and one is alive and kicking. Does 4150 12 12 wazza 2V and 4260+ geek 12-11 Most of the times i used the stick with S/N ending 957 from #1 together with this stick. They maxxx out when little bit frozen at 4280 12-11-11 Geekbench and 4300 XTU. The best thing is they have no typical b-die slow-boot when they are around or under 12 degrees, so you can train very fast 4200 12-11 without wasting precious time. The price for whole package is 400E shipped in Europe. I will not sell separately #1 kit so no need to ask this. Can also shipp to other continents so feel free to ask. payment via paypal or bank account, buyer takes cares of taxes or sends as friend.
    0 points
×
×
  • Create New...