Jump to content
HWBOT Community Forums

Leaderboard

Popular Content

Showing content with the highest reputation on 01/12/21 in all areas

  1. Hello, after a few days of testing/trying here's the final ISO + TIBx for Z490 ISO: https://mega.nz/file/MJZB2CoA#uPgJY8HNq4Y2mCIuNLrk3ApwOsvo437pqvVpOLAn3hE TIBx for Acronis 2020: https://mega.nz/file/BUx2yDyB#mIU3OjDxmlipnDAkD5UrMceCJhFVl90x5NMR8VgZlew This ISO based on WINDOWS XP PROFESSIONAL SP3 X86 - INTEGRAL EDITION 2020.9.9: http://www.zone94.com/downloads/software/operating-systems/123-windows-xp-professional-sp3-x86-integral-edition includes lots of patches for modern hardware which improves perfomance of modern CPU's and lots of other. Additionaly integrated:
    4 points
  2. Hi all, decided to let this chip go. cpu is fully boxed, mint condition, used for 3x ln2 sessions only, capable of full pot benching (cbb at -163C), 5900mhz 1.65v cinebench pass, wanted to rebench it but with the new rules I'll pass and leave it to the next owner to max out. https://hwbot.org/submission/4649001_achill3us_cinebench___r15_with_benchmate_ryzen_9_5950x_6272_cb https://hwbot.org/submission/4647926_achill3us_3dmark05_geforce_gtx_780_ti_92247_marks Asking 1200 EUR shipped within EU. Cheers, Bala
    2 points
  3. Video finally up... @chispy @flanker @TerraRaptor @Perica_barii
    2 points
  4. HWBOT goes Patreon. Those that regularly visit the HWBOT community forum or for those that are on the LN2 Haven Discord channel are already aware that Der8auer has announced that HWBOT now has its own Patreon Page. HWBOT is going through some major changes and 2021 will be a transition year to a non buggy, more responsive and easier to understand website, entirely dedicated to our passion; Overclocking. This ofcourse goes along with extra development costs on top of the monthly Amazon server hosting fee. Therefore you can voluntarily become a HWBOT Patron, just to give us that extr
    2 points
  5. So, I ran my 6900XT on LN2 and EVC2 first time yesterday. Ended up being a pretty long session because as others have reported there are quite a few things to balance to get good efficiency. It does not get easier on LN2 For me MPT worked fine in combination with EVC2 power adjustments. Like chispy reported you have to balance volts and clocks because those two decide power, and the power limit is the biggest problem when benching these cards. But on LN2 you also have to factor in temperature, going to cold can hurt your score. But the biggest factor is voltage. You will have to play wit
    1 point
  6. Thank you for that constructive criticism. This new lineup has been for most benches decided by the active people around here... Honestly I don't see a problem with the current lineup... I see logical shifts, especially in 3D, where the CPU importance is far less now and its more about clocking your GPU. I guess that's what a 3D benchmark is about. But opinions can differ. I guess some of us go to that specific restaurant and order the same meal time after time...
    1 point
  7. Card runs maxed out 3000 at -20C so yes it could go higher :)
    1 point
  8. awesome, again busy work for safedisk :D U give him no time for sleep and a rest :D Lol.
    1 point
  9. we are far from there yet bro... still so much to cover and solve
    1 point
  10. Hi All, So, plan here is, host all the software you had on that flashdrive that you lost and cant find. It's a one-stop-software-shop. O.S.S.S. I'm copyrighting that. If you have something to contribute, email it to Massman @ pieter@hwbot.org and let me know, and I'll add it to this OP. FYI, some of this stuff I dont even know what it does, and it goes without saying I don't warrant any hardware death that goes along with using it. If you don't know what it does, maybe someone will help you, or let us know when you test it. All software owned by its creator blah blah. AFI (AP
    1 point
  11. You are right, there is no need to let people wait longer for the release version of BenchMate 0.10.6. It is ready since Monday and just waiting for the new website. But I was too short on time to finish it and it probably won't be done until tomorrow. Here it is: https://benchmate.org/?v=0.10.6.7 Rough changelog: New minimum requirement for CPUs is SSE2. So it should work on all CPUs back to Pentium 4, where SSE2 was introduced. Introducing y-cruncher and CINEBENCH R23. Online and Offline Installer, so you can customize what benchmarks, tools and prerequisites are
    1 point
  • Newsletter

    Want to keep up to date with all our latest news and information?
    Sign Up
×
×
  • Create New...