Jump to content
HWBOT Community Forums

Leaderboard

Popular Content

Showing content with the highest reputation on 03/11/21 in all areas

  1. Ok, written down. For Info the other Winbonds are a 2x256MB PC3200 Corsair LL 1.1 and 2x256MB Kingston PC3000. Both can do at least 265 2-2-2-5 3.5v. https://abload.de/image.php?img=kingston.265.pi32my3jw0.png
    1 point
  2. sold thx Bot for the space
    1 point
  3. 1 point
  4. It is too much VDDG_CCD, according to my experience. My CPU does not work above 1.13V. Does not matter with LN2 or normal mode. If i set it manually to 1.2V in Win it always will be equal to VSoc. Otherwise board works as expected on cold:
    1 point
  5. Thanks for the tips it was good to start with.. Actually found a link for modded drivers to x570 on other forum: https://retrosystemsrevival.blogspot.com/2019/12/windows-7-usb-3031-amd-x570-drivers.html?fbclid=IwAR0pRDU_ts0rZb5mQ5OsCqM0B6rU5L6dKmvV3XgvufXbXgrKAYMLe2iGItA But since i do not have an am4 board with ps2 to prepare the install, I've asked a friend of mine to do it for me then simply booted from that pre-installed drive with usb drivers. It loaded a bit for a minute or two but after that works like a charm. Actually on the Impact not much slots left for a ps2 pcie car
    1 point
  6. I just tried the AGESA 1190 on my B550 E-Gaming and it runs 2100FCLK without any Problems. Maybe I will test it again with my C8 Impact.
    1 point
  7. Version 3101 Beta Version 2020/12/25 20.22 MBytes ROG CROSSHAIR VIII DARK HERO BIOS 3101 Improved system compatibility Updated AGESA code to ComboV2PI 1190 Updated graphical firmware Improved RAID function Improved system performance https://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/ROG_CROSSHAIR_VIII_DARK_HERO/ROG-CROSSHAIR-VIII-DARK-HERO-ASUS-3101.ZIP Version 3101 Beta Version 2020/12/25 20.22 MBytes ROG CROSSHAIR VIII IMPACT BIOS 3101 Improved system compatibility Updated AGESA code to ComboV2PI 1190 Updated graphical firmware Improved RAID functio
    1 point
  8. After I stumbled over over a Toshiba DDR PC2100 stick on german ebay, which had exact the same looking of the typical Winbond IC, I think Winbond are actually Toshiba. The ICs were labeled with production year 2002 in Japan. In December 1995 Toshiba and Winbond started their first technology transfer agreement and over the next years 3 other generations followed. They mentioned in April 2000 that they were the first manufacturer in Taiwan who successfully offered 0.175ยตm 256Mbit DRAMs. And me guesses that this was the start of the BH chip, even though the birth of the holy BH-5 should be
    1 point
  9. Auto660 designed and build the booster (FireRAM) this year. It is much better then the ocz booster when used fully. This unit can set dimm voltage and set vtt percentage. He is using free pins of the memory banks for this. I still have to make this mod on all motherboards. The only disadvantage is that you have to order and solder everything yourself. He is on HWbot and Discord as well.
    1 point
  10. I'm going to make a break until I get more cpus with this board but here is the latest I've done - 269 1:1 2-2-2-11 (which is actually the absolute limit of my ram even with s939) https://hwbot.org/submission/4242478_terraraptor_superpi___1m_sempron_2200_(thoroughbred)_39sec_247ms To break above 258-260MHz I change 2 registers in b0d0f3 with wpcredit - offset 66 & 68 set to C7. Voltages are Vcpu 1.85v, Vnb 2.05v, Vdimm 3.8v. The system is not stable at these clocks and it took me several attempts. 265-266Mhz are much better. Another important notice - once you ran into in
    1 point
  • Newsletter

    Want to keep up to date with all our latest news and information?
    Sign Up
×
×
  • Create New...