NickShih
-
Posts
150 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Blogs
Posts posted by NickShih
-
-
-
Nice mems Bullant.
You raised the bar for 4G. :ws:
Had a strange issue, benching last night, wondering if anyone has a clue.
I was cooling down the CPU, when the system froze around -150C. I reboot & obviously hit CBB.
Heat up to -120C, instead of being stuck at 00, now i am cycling 00 19 4C. Weird. Heatup to -100C, still same. Remove a stick of RAM at a time, i find out slot 1 isn't working with any stick of RAM that i own, even at Auto. All cycling 00 19 4C.
At this point i call it quits. Let the system heatup & around -10C, i decided to try 1 more time again, just for the heck of it. And it works.
Decided to pull down again, dump one flask in, get to around -49C, try booting again, same 00 19 4C. And then i stopped for real.
Anyone have any idea as to why...?
I tried, reflashing MEI, Clearing CMOS, heating up the mem slots with hairdryer (there was no water to begain with), different RAM, pot wasn't touching the RAM or anything. Still, nothing worked.
Please check pin of cpu socket. Use cleanser to clean it
And memory slot too.
It looks like cpu socket wet or damaged. Or memory slot
-
it happen same thing in DICE 00 19 4C.
Did all testing and nothing same error,, when I recheck the insulation all good. I took and air can and starting taking out all the moisture inside the ram slots, pci-e slots, all little holes ...
Once the MB was dry after a day, and took all moisture with the air can, Then a took a heat gun to heat up the MB.
That worked for me.
Hope it works for you
Guys.
Bcz dice will make pcb around 0 to - 10 during benching.
Ur slot will get wet very fast if u dont use fast fan to take
Cold air away.
Make sure u have good insualtion for momery slot.
00 19 4c 19. It is memory failed by training or memory not detected which allen mentioned.
-
1.65 CPU PLL Voltage -> PLL Termination on Asus +CPU Standby on Asus
1.4 VCCPLL -> ASUS PLL bandwidth . level 6 = 2.8volt , i suggest keep 1.4volt unless you cpu need high to avoid cold bug.
2.22vColdBugKillerVolt -> Core PLL on Asus
-
-
I hope it can be faster. Some issue need to solved by 1 more revision.
-
OCF 3.1
http://picx.xfastest.com/nickshih/asrock/AFDSetup(v2.0.275.1).rar
picx.xfastest.com/nickshih/asrock/X99OCF3121b.rar
Mkiller 3.1
http://picx.xfastest.com/nickshih/asrock/X99MK3133a.rar
http://picx.xfastest.com/nickshih/asrock/FSTUSetup(v2.0.275.1).rar
-
i've not idea! This is the problem.
Maybe u got faulty mobo. Try to RMA it.
When mobo is going mass production. It happended sometimes.
Sorry to hear about this
-
One stick fails 20-20, so it's 11-21-21. Win7 didn't care, but in XP it matters.
4000C11 2.17V, small waza
For some reason I can't train above 2010MHz with 1T, doesn't matter if it's C11, C15 or C19. Wonder what that's about.
It is speed limit by IC maybe. Try to loose trp/trcd might help you
Also the last 2 third timing.
-
Tightened them down to CAS11
This is impressive.. never try this before.
1.9 VDIMM? Great work
-
crazy chip . congrats
-
i think that u had backup ..... congrats
-
-
Damn, you will do 2 laps every time I do 1!!
Is there a better track than the one in Taoyuen?
check this one
http://www.gf-racecar.com/about.asp
Cheaper . They even offer the group package for 1 hr unlimited laps.
And they have A-G different tracks .
I think this place is better for us to go .
-
Only retail karts sorry
Edit to the rules: you will get 50kg of extra weight too...
so sad ... i just borrowed a racing car from my friend ...
-
Anyone wants to go karting on Tuesday 10/06?
I want to join !!! i will bring my whole karting set for sure
-
Special default single core booting bios here
It is same as the normal bios . just boot 1 core as default .
It might save the core damaged chip , then u can bench 1~2 core only.
Z87 OCF : http://picx.xfastest.com/nickshih/asrock/Z87OCFa174a.rar
Z87M OCF : http://picx.xfastest.com/nickshih/asrock/Z87MOCF155a.rar
Z87 OCF/AC : http://picx.xfastest.com/nickshih/asrock/Z87OCF183a.rar
-
1
-
-
I have the same issue again, i tried and 1.54 bios, but nothing changed.
i also have and another new cpu...!!!
So it's deffently mb problem...:-(
can someone help me..??
please remove the battery for 10 min then put it back
please try both 2 bios rom and check if same thing happen again
if still same problem . please use the MEI flash option which is at the same page as bios update .
u can send me PM anytime
-
key is not CPU and GPU ...
-
congrats ... very efficient run
-
killer chip. congrats !
-
-
bios update Both A88 & A85 ex6
http://picx.xfastest.com/nickshih/bios/F288E6P130e.rar
http://picx.xfastest.com/nickshih/bios/FA85EX6201f.rar
added "APU TDP control option " disabled this one might help 3dmark benching
one more tips here .
please make sure the pwm is under well-cooling
using memory pot and keep it under -10~20 is the best way to bench 3D .
-
bios update
http://picx.xfastest.com/nickshih/bios/F288E6P130e.rar
added "APU TDP control option " disabled this one might help 3dmark benching
one more tips here .
please make sure the pwm is under well-cooling
using memory pot and keep it under -10~20 is the best way to bench 3D .
ASRock z170 MOCF lives on Coffee Lake Mods
in Skylake/Kaby Lake/Coffee Lake (-X) (Z170/Z270/Z370/X299) OC
Posted
Some people have issues with USB port on this mobo after lots times benching under Ln2.
Bcz the Polyfuse will break if temp lower than -40 degree.
here are 3 pictures of Polyfuse locations on this mobo .
You can remove the polyfuse and short both pad with tin . Then usb should work again.