Kai7even

Hello im Dio7even from SevenSix Mods and i want you to show you my new Project Tikki-w00t Special Thanks to: Thema: Harmoiny with the nature is our theme. Our case is the "Cool Force 2" from Nanoxia. To give it a wooden touch we use water transfer printing. Water Transfer Printing for the case: Hardware: CPU: i7-6700K - thanks to eagle*23* for the pre-selected model RAM: Avexir Blitz 1.1 DDR4 32 Gb á 8Gb Riegel Mobo: Asus z170 Sabertooth Mark 1 GPU: 2x Nvidia GTX 780 PSU: be quiet! Dark Power Pro 11 850W Lüfter: Nanoxia and Bit Fenix ( noch unschlüssig ) Gehäuse: Nanoxia Cool Force 2 Watercooling parts: Fittings: Alphacool / Coolforce CPU: Alphacool NexXxoS XP³ Light - Brass Black Chromee GPU: Alphacool NexXxoS GPX - Nvidia Geforce GTX 780 M01 - with Backplate - Black Radiatoren: Alphacool NexXxoS ST30 Full Copper 360mm, Alphacool NexXxoS XT45 Full Copper 360mm Pumpe: Alphacool DDC 310 AGB: Alphacool Eisbecher DDC 250mm Acetal Now everything is naked and we build in the PSU to if it will fit. So we can have a look at the radiator and the space we need for it. My new Workshop is ready for work. Sidepanel 1. cutted. Sidepanel 2. cutted. Backside cutted. And now drag and grind ... The mainboard armor onb the backside need space. So we have to cut out the mainboard from the tray to fit everthing. For your eyes. Mainboard with paintjob For the best Ventilation of the System Sidepanel is ready for painting. To stabilize the Sidepanel i enhanced it with a L-profile.

Project7 The Case: Corsair 900D All about our Project's: SevenSix Mods | Facebook Custom-Sleeves: SevenSix Customizing | Facebook Hello im Kai7even from SevenSix Mods and i want to show you our last big project. Overview, used hardware: CPU: Intel i7-4790K MoBo: Asus Sabertooth z97 Mark S Sound: ASUS Xonar STX Ram: Avexir Blitz Series 1866mhz 4x4 GB GPU: EVGA GTX 980ti Classified PSU: EVGA Supernova 750W G2 Where is the mod? - Cablemanagement ( Sleeves for the cables. only the bare necessities are visible. - The HDD cage is covered with Plexiglas. - We installed an S-Light as a cover for the PSU. - The mainbaord-tray is covered with Plexiglas. - The choosen coolingliquid is DP Ultra Orange. - The case is accentuated with orange washers. - Sleeved extensions are crossing inside of the S-Light. - An to give it something special we decided to install a EVGA 980TI Classified with a unique custom made watercooler! - The mainboard is üainted and got some decals. - Than we installed a backplate on the soundcards back. - And last but not least we decided to install Bitspower Shiny Silver fittings. And now enjoy our photo series! S Light (short) Mainboard Hier wurde das gesamte Kunststoff weiß lackiert, die Konnektoren am Board schwarz + Decal "Seven" Radiators Mainboard-Tray Filter reservoir Sleeves und Extensions Paintjob HDD cover and tray Case Front pump bracket First Run ( Leider noch ohne GPU Kühler ) GPU Kühler (sadly, without the gpu waterblock) The grand finale! I hoped you enjoyed it and we will meet us on Facebook!