Pyr0Beast

Sweet result

LN2, awesome. Mine hanged up at ~170MHz or s for no apparent reason. Could use a bit more volts tho

Innovative setup and very nice results

It was a bit cold that day

You are forgiven. Not because of the time passed, nor the forgiving part of my mortal soul, but simply for the acquired knowledge through which you realized mistakes you made.

Would it be also possible to separate E and EB versions of Slot 1 Pentium 3 800MHz

So far, 4 submissions have been flagged for this problem. First problem: Pentium 3 800MHz is not properly detected by CPU-Z. On Slot 1, 2 editions of this 800MHz CPU exist, one with 8x multiplier and 100MHz FSB (E) and another (faster due to faster bus) version, however with 6x multiplier and 133MHz FSB (EB). Problem arises since there was another Pentium 3 CPU with 6x multiplier and with 100MHz bus manufactured. Abit BH6 on POST reports CPU as Pentium 3 600MHz(E) when FSB is set to 100MHz and Pentium 3 800MHz (EB) when FSB is set to 133MHz Unfortunately, CPU-Z has problems differentiating between the two. This is the P3-800 CPU: http://www.shrani.si/f/3g/bn/1n5iWnol/dsc00026.jpg Which is reported as this: http://valid.canardpc.com/show_oc.php?id=602696 Similar is with Pentium 2 400 which is reported as celeron. Problem is since L2 shut-off due to high latencies which I was not aware at that time. http://www.shrani.si/f/43/WU/4FIBWCOU/dsc00028.jpg You can see the 44 ns ram, which is rated at 227MHz x 2 working frequency. Reported as 266MHz celeron. L2 chache is detected but CPU-z is unable to measure its amount. http://valid.canardpc.com/show_oc.php?id=595826