froxic
-
Posts
84 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by froxic
-
-
Yeah I get it, but this limitation could be on final stage on CES, not for qualifiing. But I'm respecting all rules and dismiss this competition. Anyway, good luck guys!
-
Hmm, Cooler Master power supply needed? Why? Why? Why? Ok, im out of this! =[
-
Nice result, what BIOS do you use? I have some attempt at 1778 MHz on AIR with B03 BIOS and reatil i5-4670K. But there is no option to adjust timings to CLX-31-31 (only CLX-14-14 or leave it to auto - but its quite tricky). I try X04 and X05 BIOS but its optimised for Samsungs and PCSs it seems cause I can hit only 3 GHz on memory.
-
-
It was written in submission... about -135-140 °C CB (measured on POT)... -125-130 °C benchable... on AIR it was average piece - 4,8 GHz rock stable, 5 GHz SuperPi 32M with 1,55 V! - so very bad chip on air...
Try to adjust VCCIN to 2,5 V, Vcore to 1,7-1,9 V and Ring V to 1,5 and it will be fine i think. Im my opinion - average batch, but I get most from it! Especially wPrime runs – 1024M on 5,9 GHz :-), 6,1 GHz SuperPi 1M, 6300 MHz validation (cause XPOWER dont have LN2 mod).
-
Hmm, I must bench another 3 motherboard to beat other teams score
-
This board seems very strong in BCLK clocking even on AIR! :-)
-
Yeah, its possible with same freq to do 9,7-9,9 I think. But was too lazzy to install cropped XP and havent got too much time :-( Nextime I will try break 10s with 6800K.
-
WR using bad CPU, single channel DDR3 and bloated Windows x64? Why not :-)
-
Yeah, power settings for DIMM was at max values.
-
Btw, I have problem to adjust 1,86V+ even on air, so there is maybe problem with my piece of modules I think.
-
Hmm... interesting information! :-)
-
With 2,1 V+ I can perform slightly better I think... But it wasnt possible to adjust higher voltage than 1,85 V (system dont POST or freezed in OS) :-/
-
7th place on the world is not bad with only 1,85 V and active dual channel, right?
Nextime I must use only one stick! -
Nice screenshot but where is the benchmark?
-
Picture shows some similar patterns in the face
-
HyperPi with 1 thread only? What's the point?
-
Bios F5o has some real improvements. I can post and boot with 2800 devider with G.Skill TridentX 2666C11 (Hynix) 2 × 4 GB kit. I was impossible on air cooling before. But it would need some additional tweaking cause SuperPi 32M show some arrors instead of 1,84 V on DDR3 (1,05 V IMC). Still, first time I run this stick with 2800 MHz devider on air...
-
Tried F5n on UP7 and result? After several basic adjustements I get boot lopp (on post display repeating number 15). And other thing, font in BIOS was awful. So I dont recommend it...
-
Its 23s, not 18
But nice frequency anyway... -
LN2 BIOS neeeded for Z77X-UP7. Can somebody share? Thanks a lot!
-
BIOS F5 for Z77X-UP7 have strange bug. In some state BCLK option from BIOS dissapear and there is no way to change BCLK on XP and BCLK and multi on Windows 7. If i reset settings BCLK option appears in BIOS and overclocking in Windows works like a charm. I get back to F5F and F4 for backups – no strange behaviour at all.
-
Hello there, nice competition! :-)
-
It was supreme OC party :-)
froxic - Pentium G3258 @ 6074.5MHz - 6sec 234ms SuperPi - 1M
in Result Discussions
Posted
Nice OC event, but we have not enought time for fine tuning. Maybe I'll check this chip later...