CornerJack
-
Posts
82 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Blogs
Posts posted by CornerJack
-
-
Best BIOS !
-
3
-
-
Thank you !
-
5600 MHz CCD0 but 5400 MHz CCD1 for 1,19 volt
-
First series of tests with the Dominator Platinum RGB 6600 MT/s CL32 kit.
I used the profiles of the DARK K|NGP|N by modifying some parameters. There is still room for optimization but it's already a very good start. The Corsair kit seems to work perfectly with the motherboard ?
-
5
-
-
17 minutes ago, MR-B said:
?
SP ?
-
1
-
-
Need to see now this motherboard in Europe... and thanks for guide !
-
Good job !
-
On 8/11/2021 at 11:16 AM, websmile said:
imc-volts/vdimm or trfc might also be a problem. Real voltages seem to be higher on apex than on asrock, but limits on mem oc do not differ that much. Fast test on an unknown kit from rma works easily
Thanks
-
1
-
-
On 4/25/2021 at 5:51 PM, websmile said:
I received the boards a few days ago and now had a couple of hours for first memory tests. Retail 11900K on aio, memory air
4400c17 at 4800c14
G.Skill Royal 4400C16 at 4800C14
G.Skill 3600C14 at 5000C14, IMC could not keep up with the load
at 5214 C15-14
at 5277 c15-14 direct boot Cinebench
More to follow, I still have some screens on HDD. 5333c15 posts but fails win enter, seems more of imc than memory issue
Hello, I also just received the motherboard but where the 5066 strap goes without a problem with the APEX, impossible with the OC Formula. During Geekbench 3.4.2, the benchmark crashes every time when dijsktra. Any ideas? A particular trick? Thanks a lot.
-
-
First test under LN2 with Asus Crosshair VIII Dark and 5950X : https://hwbot.org/submission/4624385_cornerjack_cinebench___r15_ryzen_9_5950x_6508_cb
58 x 100 (1.5875v) - FLCK 1400 - 3800 MHz 14-13-13-28 (1.5v) - profil LN2 from BIOS SOC 1.35v PLL 2.1v VDDG CCD 1.15v
I have a few questions. Currently, I'm managing to bencher 5.8 GHz at Cinebench R15 at -155°C.
I was able to pass 5850 MHz but the score is a hundred points worse than 5800 MHz ?
The CPU also accepts to take full pot but I can't do better. After a few seconds of benchs, the PC reboot with a code A6 and impossible to make Cinebench again. If I switch from CPU score to Fire Strike, I can do 5.7 without any problem.
Do you have any idea why ? Thank you.-
1
-
-
Hello, feedback with my Ryzen 9 5950X on the Crosshair VIII Dark Hero (BIOS 2402).
Under watercooling 4.7 GHz 1.19v R15/R20 and 4.8 GHz 1.29v.
First test under LN2 with my Ryzen 5950X on the C8D. The CPU takes 5.8 GHz at 1.5875 volt (multimeter) at -155°C. I think I have a coldbug at -160°C and I also have a code 07 coming in while the FCLK frequency is only 1400 MHz. I will do another set of tests tomorrow.
SOC : 1.35v - VDDG CCD : 1.15v - VDDG IOD : 0.9v - PLL : 2.1v
Do you think my coldbug at -160°C can come from the FCLK? If I put a voltage higher than 1.62v, the motherboard will reboot directly, so even at -155°C, I can't try to increase the frequency.-
1
-
1
-
-
Yes, multimetre with Level 5 Load-line calibration
-
Hello, evbot and GTX680 avaible? Thanks
-
Hello how much for #1 G.Skill Trident Z Neo (F4-3600C16D-16-GTZN) to send in Belgium, thanks.
-
Hello, do you have problem under cold with memory Samsung ? Thank you
-
Hello, do you have problem with memory under cold ? (-100°C). I have a 5770 Hawk with samsung... Thanks
-
Nice, thank you !
-
Thanks, yes memory air
-
Thank you MaddMutt ;)
-
Thanks Albrecht :)
-
Close please
in Sold
Hello, you sell the motherboard alone ? Thanks
-
Thanks Wizerty for help with subtimings !
-
Hello, which usb for USB Flashback ? Thanks
bl4ckdot - DDR5 SDRAM @ 5009.8MHz - 5009.8 MHz Memory Frequency
in Result Discussions
Posted