Jump to content
HWBOT Community Forums

miker2ka

Members
  • Posts

    143
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by miker2ka

  1. 4 hours ago, Kashtan said:

    Any result on water? Voltages on 5600?

    5500@1.39 he mentioned in the post. If i recall well there were 29C in room when he tested that cpu

  2. 7 hours ago, Fasttrack said:

    Since HWBOT moves ahead, and leagues have remained more or less the same, how about some very easy moderation on submissions made by "enthusiasts"

    with 5.7ghz CBR15 I7-7700K and 1.65V on "water".

    Well, it should be stated clearly what ambient means.

    If you put your radiator in ice it's chilled water, but if you open the window in winter with -20C outside it's ambient. 

    Personally, if you need your coat on while benching it's not ambient. 

  3. On 6/25/2019 at 5:19 PM, dumo said:

    On memory side, good a1 can do 4266c12 but probly not 4800. Some a2 can do both 4266 and 4800+c14, but some can't do both freq at all ..Provided that imc could scale up.

    Tell us of your experiences IMC wise from tests you have done with same ram kit on 9900k and 9600k

    @websmile  maybe you can tell your findings from testing lots of ram... 

  4. I'm starting to think that 9900k have weaker IMC on average than i though. I managed to boot 4700 dual channel with 2 cores active.  4800 is no go. I gave the kit to a friend with m10a and 9900k but he can't boot 4700 or 4800 in dual either.

    Feel free to share your experiences with 9th gen cpu and high speed ram

    • Sad 1
  5. I'm testing a 4800C18 kit on M11A and 9900k. The CPU can do 4200 12.11 (ram limit), and can boot single channel for validation 4900 in hot summer, 5000 with 20C room temp, so i assume it's a decent IMC.

    Problem with the 4800 kit is that i can't boot XMP. I tried bios 1005 and bios 033. Tried both xmp profiles, with auto and manual volatages (1.45/1.6 io/sa). Tried frequency range from 4600 to 4800.

    I dont't think my IMC is that week that cannot do 4600c18.

    I feel like i'm missing something, like i forgot a shitty setting...

    Tried trace centering on/off but did not had any impact.

    With MHC Full check enabled i get stuck at b1 and with it disabled i get stuck on 23

×
×
  • Create New...