04ahgy

Hey, database should be corrected, just A10-5800K and A10-5700 APU-s are recognised as FM2. I Submitted a score with A8-5600K, but it was not recognised as FM2. Thanks, HGyu

Because your card does not use the same VRM. Mine uses different chip from CHiL CHL8228G. BIOS structure also differs from the GV-R797TO-3GD, and the BIOS submitted is not intended to use on your card. HGyu

Congrats! Why did you use such an old GPU-Z? Did not detect the cards properly.

What was your memory freq & timingset? Nice score btw! Congrats.

Congrats for the great score. Are you considering about liquid neon cooling? It's still -248°C and way cheaper than helium. Also it has greater thermal characteristics (heat of vaporization) than Helium.

Using F11a BIOS in combination with i7-3820 and of course the UD7. The weird behaviour is the following: After CMOS reset I enter the UEFI setup. Load optimized defaults, reboot, then enter the UEFI setup again. The system is running idle while staying in the setup. Everything is at its default value. NOW pressing any of the the power button (the mounted one at the corner, or the other one of the front panel header) the system hangs totally holding the last screen state on the display. Reset is okay then. Any newer BIOS? Thanks, George.

Top 10 of the World. Congratulations.

Nice score. Nice system. Congratulations.

Okay, F11a still has a bug, that was also present in the F10. When PCH 1.1V and PCH 1.5V voltages are set to "Normal" in the Chipset Voltage Control Section then the CPU does not receive its voltage set by the user. Eg. if the above mentioned voltages are set to "Normal" and CPU Vcore is set to 1.4V, then the CPU receives only 1.15V. If these are set to anothet value, then everything is okay. HGyu

I will try it soon. Thanks.

Now dont pretend to wait for any better BIOS updates for the UD7?

Hmmm, it didn't take so much time to get the EOL status. Lol.

I will try it for sure soon, and I will be reporting the results. Do you have some einformation about a new deta BIOS that does the very awaited miracle? Thanks, George

Recently have tested my 3930K CPU in a friend's board, Rampage IV Extreme, 5050MHz 6c/12t easy @ 1,54V... UD7 still has this clock wall. I really hope that they will eliminate it soon and / or under subzero it will behave normal. HGyu

Confirmed, that parameters working with spiflash.exe do not work with efiflash.exe. I tried it 5 minutes ago. O.C. button does not do anything for me using BIOS version F10: Loaded UEFI Defaults, then save, then poweroff. Pressed O.C. button, booted to windows, and all the clock were the same (wprime1024M)...