Gigelz
-
Posts
690 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Blogs
Posts posted by Gigelz
-
-
9 hours ago, KaRtA said:
So you have to mod the board to make this happen?
jep. and the mod is not super easy if you don´t have good soldering skills
-
1
-
-
8 minutes ago, KaRtA said:
How does the vpll mod work?
Sometimes you can run 45nm cpus without coldbug when you give them lower pll than stock.
-
Hopp
-
Hopp
-
1
-
-
you can flash the x04 for the normal soc force onto the ln2 board with intelfpt without any problems. works perfect !
-
Hopp
-
On 11/23/2019 at 6:50 PM, Gigelz said:
Someone here who has experience with a rampage extreme which doesn´t want to keep bios settings ? When i slide the battery in, voltage on that battery contacts drop to zero, indicates a short in that section to me...
found the issue with the help of @Coldwove
the switch in the lower right corner is broken.
-
1
-
-
Hopp
-
3 hours ago, richiec77 said:
If Gigelz doesn't take the NB pot, I will.
You can take it
i am located in germany. That will be more expensive.
-
Do you have a price for that kpc nb pot ?
-
superb efficiency. i got 9:40:406 with 650fsb
-
17 minutes ago, Noxinite said:
Sounds like a nice CB, as for PLL I had a chip that's CB scaled in the opposite direction (i.e. it got lower with higher PLL upto 1.6V).
i checked both directions, up and down
-
1
-
-
nice work
unfortunately the new cpuz versions are crap for max fsb validations...
-
5 hours ago, TerraRaptor said:
Not only clocks but effeciency is more than acceptable. I wonder if this is the "damn strong cpu" you were looking for:)
thanks
idk if efficiency is super good or average. i can only compare with the other cup results atm... thats not a super strong cpu i think 
probably @Eisbaer798 and me will recheck this chip with x10 next time. but in fact this chip has a cb at around -160 and no reaction to vpll mod.
-
1
-
-
Push
-
thanks guys :) to be honest, it went far better than i expected.
-
1 hour ago, wytiwx said:
How strong should it be
6500 32M would be nice
and full pot capability with vpll mod
-
2
-
-
6 hours ago, wytiwx said:
E8600 or R3BE ?
Only looking for an e8600 atm
-
found a r3be
push
-
1
-
-
How about 100€ for the p55 classified ?
-
Hopp
-
16 hours ago, Ziken said:
it's a roptor 3 ?
up
Difference between raptor 3 and 4 is not huge
you can take raptor 3 aswell
-
15 minutes ago, l0ud_sil3nc3 said:
I have the droids you're looking for, but they won't be cheap
i smell some 2666c10 dom plat´s ?
-
1
-
-
Tweaked with baredit ?
good job !
Gigelz - Rampage II Extreme @ 294.7MHz - 294.7 MHz Reference Frequency
in Result Discussions
Posted
Yep
i am sure you will do atleast 305 soon.