wytiwx
-
Posts
218 -
Joined
-
Last visited
-
Days Won
6
Content Type
Profiles
Forums
Events
Blogs
Posts posted by wytiwx
-
-
2 hours ago, Tech Tested said:
Also, what bios are you using? I have the same board but cannot go above 333 fsb on mine without instacrash on these old P4/celly.
Vcore 2.04V. Used the last version BIOS which you can see in valid URL. I didn't get those FSB bugs far by now. If it has, maybe caused by core clock, bios tweak, and even somewhere damages on board.
-
13 hours ago, TaPaKaH said:
9G on LN2? wow
hahaha no way on that. Our first time to try LHe OC and We saw 9GHz, but F7 keyboard not working at that moment.
8.3G 32M is by LN2.
-
5 hours ago, unityofsaints said:
Get back to 775!
you will see, 775 is my best favor
- 1
-
17 hours ago, Master Floppa said:
when LHE?
on the way ?
- 1
-
17 hours ago, TaPaKaH said:
1337 volts!
cpuz voltage always shows lower vid you know
-
16 hours ago, Tech Tested said:
Glad to see you still at it! I have been trying to hit 8g and have this board. How do you get past the 333fsb wall with the Pentium chips?
I didn't see p4 333FSB wall on this board by now
-
On 11/27/2023 at 11:36 PM, TaPaKaH said:
still, highest NetBurst FSB ever?
Exactly, Core clock limited. FSB can do 565 at 12x
-
16 hours ago, zenith_sym said:
Hi mate I was seen your Bsel mod guide on "xtremesystems" After trying multiple times with several 347 and 352, It was unsuccessfully stuck at (e9 / boot block compatible ) I have these mobos: p5q deluxe, maxi 2 formula, p35dq6, x38 maximus extreme, asus commando, p5b deluxe and I hope get me through this problem can you help me?
Only P5Q-D and M2F P45 mobo need BSEL 533 to 800 mod, your other mobos don't. You have to confirm firstly CPU can do 50% OC by default Vcore.
-
Now I can boot G4 at 9000 on air, when I tried more mem freq but post code stucked at 4F ( 6E-->55-->31-->4F ), push more SA, MC, IVR, MEM VDD/VDDQ Voltage but no go, need more idea
-
On 1/16/2023 at 8:17 AM, seranidy said:
After playing around with G4 on the apex and hitting 9600 on ambient, (only tried bios 0806 and 0810)
You need much lower SA, around 1.25ish for it to start working and you need to play around with the strap + BCLK, too high and it wont boot, and sometimes too low and it won't boot. (I was doing 10000 strap and 89 BCLK, and then adjusting BCLK inside of the OS)
Mess around with your IVR and MC Voltages too, those might need to be a bit lower than what G2 needs for 8800. Have fun.
THX. I booted G2 8800 with normal timing, must I use raw timing for G4 at the same mem Freq?
- 1
-
My 790 APEX can do A-DIE 8800 boot on air by gear2 mode, but failed to same 8800 by gear4 mode. Have tried different CPUs and BIOS but nothing better, any idea?
-
Got them
In my Internet, I can't see the images on imgur, the same as on some websites, so I have to turn to HWB
-
-
Pump for good CPU ?
- 1
-
Well, it is not so strange, since you saw my 5.2GH by LN2 and your 5.1GHz by cool water years ago ?
-
10 hours ago, Mr.Scott said:
BenchTec_Toolbox is better.
Already got this tool, it needs dot net framework and manual click. Want to see difference.
-
10 hours ago, Leeghoofd said:
Thanks bro.
-
Can anyone send me the "AwardFabrik wPrime TWKR" software? Thanks a lot!
-
Think it is a 7GHz i7-990x ?
-
On 8/11/2021 at 5:02 PM, Noxinite said:
Tried again on LN2, but very little progress before CPU go poof - only 738. https://hwbot.org/submission/4797732 2nd chip tried stopped around 733 after a few hours of trying, so thinking maybe near board limit? Especially as without CPU-z open I only saw 740 maximum.
MAX FSB your mobo and CPU can post on air?
-
On 9/10/2021 at 10:58 PM, Hyperhorn said:
Congratulations, very impressive score! ?
I'm quite amazed how you managed to squeeze 700 MHz FSB out of the setup and beat the existing E7200 CPU-Z scores by such a huge margin of over 500 MHz considering the names I see in that list.
Well, good binned CPU and good OC mobo worked together I think
-
On 9/9/2021 at 12:11 PM, iandiniz48 said:
Vmod?
no mod
-
52 minutes ago, kicsipapucs said:
Lovely record, congrats, but PL11? :O
maybe PL10 failed at that time, can't remember well, a few months ago
-
At first sight I thought it was Q8200
wytiwx - Celeron D 347 @ 8635.5MHz - 8635.54 MHz CPU Frequency
in Result Discussions
Posted
I think you're quit right, if it can bear <30K without freeze or power off. Who knows :-p