alexmaj467

del

you can still better, my waterblock failed. my 6800gs can 481/662  with good water block Now I have a result of 15188 on 754 socket, with a frequency of 462/638 . It is below yours, but this is the maximum that is possible with this waterblock.

I don't have any powerful ATI video cards. overclocking 3d , I had not considered yet.

I didn't really do it that way (the assumption that will work ). I don't have 3850 or 4650, on something even weaker I don't want to go.

click submit from the OVERVIEW page

I don't know, the usual plumbing in the kitchen . Кран кухонный.

Where is the topic of discussion for round 5 ? Watching football ? I'm tired of waiting to insert here Wallpaper once asked. 1280х1024 5 round 1920x1200 5 round 1280x1024 Bonus round 1920x1200 Bonus round

I for a full-screen start approximately so. Code for Pifast.bat @echo off SetLocal EnableExtensions EnableDelayedExpansion IF "%~1"=="max" ( SET params=%* start "Name of the Batch" /MAX %0 !params:~4! EXIT /B ) ECHO new params: %* pause launcher pifast41.exe hexus.txt Code for RUN_Pifast.bat @echo off Pifast.bat max

I'm talking about the part where it is written about setting the priority for any file using the program PriFinity 2.5

M1RROR Read this

1280x1024 1920x1200

Wallpaper for ROUND 3 1280x1024 1920x1200

Wallpaper for ROUND 3 1280x1024 1920х1200

Sorry for my English. Full document in pdf format in Russian and a little English here. Vmem mod part 1. 20 or 50 kOm VR solder between 6 and 4 pins, LM358 operational amplifier. To chenge the voltage from 2.85v to 3.2v. Before you do, measure the resistance between the pin. After solder a resistor trimmers, put the value close to what it was before all the action and only then turn on .reducing the resistance you increase the voltage. Vmem mod part 2. Change the memory power from the 3.3 volt on the 5 volt supply for the memory chips are Winbond BH5 and others. The control of the increase of the voltage will be the same resistor from part 1 .

for round 2 1280x1024 1920x1200

remove from the Global score. UCBENCH 2011

final / If will go will make with the second round and so on. 1280 x 1024 px in zip 1920 x 1200 px in zip 2048 x 1536 px in zip

I'm in my last big picture, the letters were not aligned well. If you decide to use these then I'll adjust to it pretty.

2048X1536 The entire the text a new.

I want the Wallpaper without the font. to put the text in their place so as not to differ letters effects that apply the one who did the first Wallpaper.

If so it will be more beautiful Wallpaper ? that'll do for each round. Can anyone have the Wallpaper without the text (Old School is Best School Season) I have the font this is to write the new not to differ in effects.

Complete agreement. Too bad we can't re-vote. It would be better not formulas wrote and the fact that all who have 0 points get 0.2. This was clearer. I am for a solution to the problem but not this way , some hardware does not require the solution,other of a part requires.

Sorry for my English. But I see the problem now on the other side. With the expectation that none of the processors in which the maximum acceleration of the ceiling does not exceed 10 - 70%. s 939 - s754 - s1155 non-K ...... The problem with those processors who are over 80% and 200% of the nominal value. You can make 2 formulas ? for the ones who are poorly looking to acceleration what we have now and for others to access a greater percentage of 25% ? If it is possible that we will collect a list of those processors which require changes to the calculation formula. will not work one formula is valid when the ceiling of dispersal among different processor families. Plus results 0 points replace 0.1 No problem Athlon (Venice, s939) Athlon (Newcastle, s754) Celeron (Willamette 478) Core i5 2400 Core i5 4690K problem Celeron D 336 (2,80GHz, s775) Celeron D 325J (2,533GHz, s775) Celeron D 347 775 Athlon II X2 250 Phenom II X2 555 BE

462 socket do not want to see this year. 370s 1. highest CPU frequency possible (percentage OC) - (Only use processors s370 Coppermine Celeron) 2. Wprime32 - (Only use processors s370 Coppermine no CoppermineT, 2xCPU allowed) 3. SuperPI 1m - (Only use processors s370 CeleronTualatin) 4. Motherboard Reference Frequency or Memory Frequency. to be continued.....................................................