-
Posts
159 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Events
Blogs
Everything posted by Max-Hardware_Numb3rs
-
I tried 4 Apex, all 2021, all 4 can do 7000+ with dual channel or B1 slot, but quad channel or A1 the wall is at 6600 for bios v1304 or 6400 v1403, higher than that TM5 will fail in seconds, tried with different CPUs and different Kits. 4/4 to me seems that 2021 batch is pretty doomed Also a Hero 2021 same issue and same behavior with the bios versions a cheap TUF Z690 can do 6600 C32 Tight easy easy... from an Apex we should have way more than that
-
So far is a bit messy, I have 3 M0EAY0 (Nov and Dec 2021), with latest bios (1304) I can reach 6400 stable on 2 and 6600 on one, but slot A1 is pulling back by a lot, while B1 can easily go past 7000, also in dual channel with 2 boards I can go past 7000 (by disabling half of the channels in bios), with all channels enabled is really hard to get it stable, lot of tinkering. Tested with many CPUs and Ram Kits I can return 2 of the 3 and I hope Asus will accept RMA on the other, it is actually a pity for a board that is supposed to be among the best of the best for OC Will try now with the 1403
-
Thanks guys! This is the ultimate, seems good but it need volts to scale up and I was limited by the cooling, I'll try again with the cascade to have a steady -95, just below CB. I have also to fix the CB of the CPU when plugged the card in the first or second pcie, strangely from bios I cannot set Gen3, it stays gen4 and 3rd slot hurt the score, I can do 5.9+ with this CPU
-
I'm testing the Liquid Devil Ultimate, but unfortunately, I have no scaling on cold, 2700min and 2800max 2100mem Fast timings is my wall, on Liquid cooling and the same at SS (-40), Cascade (-95) or LN2 (CB at -103C) So count the luck of the draw before buying it, at least set the expectation right, you may end up with a great liquid cooling card, I got the 3Dmark 5th position super easy in Firestrike Extreme, but for this one is the end of the line. Tomorrow I will have another here and repeat the test, I will also use the EVC2 to tinker a bit more.
-
Zen SuperPI 32M 5G/4G Challenge
Max-Hardware_Numb3rs replied to Massman's topic in Ryzen | Bristol Ridge AM4
Great to see that this is taking off, be with you soon ? -
Zen SuperPI 32M 5G/4G Challenge
Max-Hardware_Numb3rs replied to Massman's topic in Ryzen | Bristol Ridge AM4
Well done! And thanks, now I know what to do next session -
Zen SuperPI 32M 5G/4G Challenge
Max-Hardware_Numb3rs replied to Massman's topic in Ryzen | Bristol Ridge AM4
I tried briefly but it was slower, and the usb driver was crashing the system, I’ll need to work more on that to be sure of the efficiency In Zen2 was worse, when you exit 1:1 the latency have a big penalty, and in spi32m latency is everything on Zen, I might try again and with the 5950X. I think I can get into the 4:40 or even bit better, but for the world record I guess a 6.5 is due -
Zen SuperPI 32M 5G/4G Challenge
Max-Hardware_Numb3rs replied to Massman's topic in Ryzen | Bristol Ridge AM4
Sub 5m done https://hwbot.org/submission/4599561_hardware_numb3rs_superpi___32m_ryzen_7_5800x_4min_58sec_172ms?recalculate=true Cmon, don't let me play alone... -
Zen SuperPI 32M 5G/4G Challenge
Max-Hardware_Numb3rs replied to Massman's topic in Ryzen | Bristol Ridge AM4
AMD now doesn't need 7GHz, I think that sub 5m is definitely possible with a good chip that can do 5.8/5.9GHz, and we've seen 6GHz+ tonight I'll go LN2 and we start setting a bar -
Zen SuperPI 32M 5G/4G Challenge
Max-Hardware_Numb3rs replied to Massman's topic in Ryzen | Bristol Ridge AM4
https://hwbot.org/submission/4598083_hardware_numb3rs_superpi___32m_ryzen_7_5800x_5min_55sec_190ms?recalculate=true Daryl, come and let's restart the funny competition -
OGS - GeForce RTX 2080 Ti - 2sec 665ms GPUPI - 1B
Max-Hardware_Numb3rs replied to safedisk's topic in Result Discussions
Great speed, well done! -
Are the Galax 4800 still available? If yes I'm in
-
GPU Pot TEK-9 ICON 3.0 new with box and accessories
Max-Hardware_Numb3rs replied to CENS's topic in Sold
That is a nice result, and 5.4 on air looks promising, but I need a fast CPU for Spi32m, I have a 9900K that can do a similar CB15 score and 7.2GHz Spi32m, if this can go above 7.2 I might buy it, any chance for you to test it again? -
GPU Pot TEK-9 ICON 3.0 new with box and accessories
Max-Hardware_Numb3rs replied to CENS's topic in Sold
Did you tried max frequency? something light, like the CPUz Validation, to see how past it can go above 7GHz -
GPU Pot TEK-9 ICON 3.0 new with box and accessories
Max-Hardware_Numb3rs replied to CENS's topic in Sold
Might interested in #2 what is the max Spi32M frequency? (LN2)