-
Posts
159 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Events
Blogs
Posts posted by Max-Hardware_Numb3rs
-
-
So far is a bit messy, I have 3 M0EAY0 (Nov and Dec 2021), with latest bios (1304) I can reach 6400 stable on 2 and 6600 on one, but slot A1 is pulling back by a lot, while B1 can easily go past 7000, also in dual channel with 2 boards I can go past 7000 (by disabling half of the channels in bios), with all channels enabled is really hard to get it stable, lot of tinkering.
Tested with many CPUs and Ram Kits
I can return 2 of the 3 and I hope Asus will accept RMA on the other, it is actually a pity for a board that is supposed to be among the best of the best for OC
Will try now with the 1403
-
2
-
-
Well done! That is a really big score! Thanks for giving me a good reason to push that card again :D
-
Great score! But show us the good one :D
-
Thanks guys! This is the ultimate, seems good but it need volts to scale up and I was limited by the cooling, I'll try again with the cascade to have a steady -95, just below CB. I have also to fix the CB of the CPU when plugged the card in the first or second pcie, strangely from bios I cannot set Gen3, it stays gen4 and 3rd slot hurt the score, I can do 5.9+ with this CPU
-
1
-
-
19 hours ago, chispy said:
That has been the same issue for all of us benching this card bro. Power limit is what holding this cards back all the time , see Rauf post on page 1. Definitely evc2 is the way to go on this cards , good luck amigo and post back your results and findings.
EVC2 efficiency is far better so far, but I keep to not scaling with cold in frequency over 2800 max clock, is going to be a tough battle, but we like when is challenging right?
I will write here my findings along the way when I discover something useful
-
1
-
-
Got the same issues with the second card, but a CBB at around -80C, CB still around -100C, it seems the power limit is the issue even on this "unleashed" card, I will keep tinkering, maybe with the EVC2 I have more chance to improve.
-
1
-
-
I'm testing the Liquid Devil Ultimate, but unfortunately, I have no scaling on cold, 2700min and 2800max 2100mem Fast timings is my wall, on Liquid cooling and the same at SS (-40), Cascade (-95) or LN2 (CB at -103C)
So count the luck of the draw before buying it, at least set the expectation right, you may end up with a great liquid cooling card, I got the 3Dmark 5th position super easy in Firestrike Extreme, but for this one is the end of the line.
Tomorrow I will have another here and repeat the test, I will also use the EVC2 to tinker a bit more.
-
1
-
-
Nice score! Pretty high frequency for a retail, Galax always impress
-
Well done, white pcb strikes back :)
-
Great to see that this is taking off, be with you soon ?
-
1 hour ago, shar00750 said:
Well done! And thanks, now I know what to do next session
-
1
-
-
5 hours ago, flanker said:
Maybe a little few second down with Win7?
I tried briefly but it was slower, and the usb driver was crashing the system, I’ll need to work more on that to be sure of the efficiency
4 hours ago, Alex@ro said:Well i was saying 7 ghz in order to have a chance at WR
Great score so far, keep pushing, isn't 4800c14 faster than 3200 c10?
In Zen2 was worse, when you exit 1:1 the latency have a big penalty, and in spi32m latency is everything on Zen, I might try again and with the 5950X.
I think I can get into the 4:40 or even bit better, but for the world record I guess a 6.5 is due
-
1
-
-
Sub 5m done
Cmon, don't let me play alone...
-
5
-
-
2 hours ago, Alex@ro said:
AMD being better clock per clock than intel, surely feels like Athlon4 times. If only they did 7 ghz for single-thread....
AMD now doesn't need 7GHz, I think that sub 5m is definitely possible with a good chip that can do 5.8/5.9GHz, and we've seen 6GHz+ tonight I'll go LN2 and we start setting a bar
-
Thanks guys. In fact I made a mistake saving the screen, but before tomorrow I will have a much better one to post properly :D
-
1
-
-
They have more than 1GHz of advantage on LN2 but I'm sure we can get pretty close this time :)
-
Daryl, come and let's restart the funny competition
-
1
-
-
Great speed, well done!
-
Quick test to try max frequency, but got condensation in the back near the socket, with the inferno... not my lucky day, the chip seems decent
-
Are the Galax 4800 still available? If yes I'm in
-
4 minutes ago, CENS said:
Check my profile. The Cinebench result is what I have. Something worth exploring
otherwise there is nothing left to do for you lol
That is a nice result, and 5.4 on air looks promising, but I need a fast CPU for Spi32m, I have a 9900K that can do a similar CB15 score and 7.2GHz Spi32m, if this can go above 7.2 I might buy it, any chance for you to test it again?
-
14 minutes ago, CENS said:
I'm noob ^^ Didn't bench Spi32M
Did you tried max frequency? something light, like the CPUz Validation, to see how past it can go above 7GHz
-
Might interested in #2 what is the max Spi32M frequency? (LN2)
-
1
-
-
On 7/13/2020 at 3:34 PM, BartoszUk said:
Hello all i just get my pc parts i see you have special config bios this is save ? I looking any way to try oc my staff
before i use
AMD Ryzen 9 3900X
ROG CROSSHAIR VIII FORMULA (AM4)
Crucial Ballistix BL2K8G32C16U4W 3200 MHz, DDR4, 32GB (8GB x4)
and all works at
cpu 4.2 ghz / 1.24 vol
ram 3800 flc 1800
when i update cpu for xt
AMD Ryzen 9 3900XT 12-Core Processor
ROG CROSSHAIR VIII FORMULA (AM4)
Crucial Ballistix BL2K8G32C16U4W 3200 MHz, DDR4, 32GB (8GB x4)
my pc dont start anybody can help me to explain how to oc it ?
My oc was newbie i jsut change clock ratio and voltage nothing more . This mobo have lots options what i dont know and i just dont use from save.
Regards
Probably your XT doesn't like 1900 flck, try 1800 and work your way up
ASUS ROG MAXIMUS Z690 APEX | APEX 14
in Alder Lake (Z690) & Raptor Lake (Z790) OC
Posted · Edited by Max-Hardware_Numb3rs
I tried 4 Apex, all 2021, all 4 can do 7000+ with dual channel or B1 slot, but quad channel or A1 the wall is at 6600 for bios v1304 or 6400 v1403, higher than that TM5 will fail in seconds, tried with different CPUs and different Kits.
4/4 to me seems that 2021 batch is pretty doomed
Also a Hero 2021 same issue and same behavior with the bios versions
a cheap TUF Z690 can do 6600 C32 Tight easy easy... from an Apex we should have way more than that