Jump to content
HWBOT Community Forums

DonMarkoni

Members
  • Posts

    16
  • Joined

  • Last visited

Converted

  • Location
    SERBIA

DonMarkoni's Achievements

Newbie

Newbie (1/14)

10

Reputation

  1. Here's a BIOS template for R4E... if anyone's interested... old school, txt file, not BIOS s/s. ************************EXTREME TWEAKER************************ =============================================================== LN2 Mode Disable All Core Target CPU Turbo-Mode Speed : 5000MHz Target DRAM Speed : 2400MHz Ai Overclock Tuner [Manual] CPU Level Up [Disabled] BCLK Frequency [100.000] CPU Strap [100MHz] ClockGen Full Reset [Enabled] Turbo Ratio [by All Cores] By All Cores [50] Internal PLL Overvoltage [Enabled] CPU Clock Gen Filter [20UF] Memory Frequency [DDR3-2400MHz] Xtreme Tweaking [Disabled] EPU Power Saving Mode [Disabled] =============================================================== >DRAM Timing Control Rampage Tweak [Mode 2] Primary Timings CHA CHB CHC CHD DRAM CAS# Latency 7 7 7 7 [7] DRAM RAS# to CAS# Delay 11 11 11 11 [11] DRAM RAS# PRE Time 7 7 7 7 [7] DRAM RAS# ACT Time 27 27 27 27 [27] DRAM COMMAND Mode 1 1 1 1 [1] Latency Boundary [Auto] Secondary Timings CHA CHB CHC CHD DRAM RAS# to RAS# Delay 4 4 4 4 [4] DRAM REF Cycle Time 96 96 96 96 [96] DRAM WRITE Recovery Time 14 14 14 14 [14] DRAM READ to PRE Time 4 4 4 4 [4] DRAM FOUR ACT WIN Time 20 20 20 20 [20] DRAM WRITE to READ Dealy 4 4 4 4 [4] DRAM Write Latency 8 8 8 8 [8] Tertiary Timings CHA CHB CHC CHD tRRDR 0 0 0 0 [0] tRRDD 0 0 0 0 [0] tWWDR 0 0 0 0 [0] tWWDD 0 0 0 0 [0] tRWDR 8 8 8 8 [8] tRWDD 3 3 3 3 [3] tWRDR 1 1 1 1 [1] tWRDD 1 1 1 1 [1] tRWSR 8 8 8 8 [8] tCCD 0 0 0 0 [0] Latency Timings CHA CHB CHC CHD DRAM RTL (CHA D0 R0) 37 [Auto] DRAM IOL (CHA D0 R0) 5 [Auto] DRAM RTL (CHA D0 R1) 37 [Auto] DRAM IOL (CHA D0 R1) 5 [Auto] DRAM RTL (CHA D1 R0) 11 [Auto] DRAM IOL (CHA D1 R0) 0 [Auto] DRAM RTL (CHA D1 R1) 11 [Auto] DRAM IOL (CHA D1 R1) 0 [Auto] ----------------------------------------------------- DRAM RTL (CHB D0 R0) 37 [Auto] DRAM IOL (CHB D0 R0) 7 [Auto] DRAM RTL (CHB D0 R1) 37 [Auto] DRAM IOL (CHB D0 R1) 7 [Auto] DRAM RTL (CHB D1 R0) 11 [Auto] DRAM IOL (CHB D1 R0) 0 [Auto] DRAM RTL (CHB D1 R1) 11 [Auto] DRAM IOL (CHB D1 R1) 0 [Auto] ----------------------------------------------------- DRAM RTL (CHC D0 R0) 37 [Auto] DRAM IOL (CHC D0 R0) 5 [Auto] DRAM RTL (CHC D0 R1) 37 [Auto] DRAM IOL (CHC D0 R1) 5 [Auto] DRAM RTL (CHC D1 R0) 11 [Auto] DRAM IOL (CHC D1 R0) 0 [Auto] DRAM RTL (CHC D1 R1) 11 [Auto] DRAM IOL (CHC D1 R1) 0 [Auto] ----------------------------------------------------- DRAM RTL (CHD D0 R0) 37 [Auto] DRAM IOL (CHD D0 R0) 7 [Auto] DRAM RTL (CHD D0 R1) 37 [Auto] DRAM IOL (CHD D0 R1) 7 [Auto] DRAM RTL (CHD D1 R0) 11 [Auto] DRAM IOL (CHD D1 R0) 0 [Auto] DRAM RTL (CHD D1 R1) 11 [Auto] DRAM IOL (CHD D1 R1) 0 [Auto] Others DRAM CLK Period [5] Enhanced Training (CHA) [Disabled] Enhanced Training (CHB) [Disabled] Enhanced Training (CHC) [Disabled] Enhanced Training (CHD) [Disabled] MCH Duty Sense (CHA) [15] MCH Duty Sense (CHB) [17] MCH Duty Sense (CHC) [15] MCH Duty Sense (CHD) [17] Receiver Slew [Normal] Transmitter Slew [Normal] MCH Recheck [Auto] RC Warm Boot Fast [Disabled] =============================================================== >DIGI+ Power Control CPU VCore CPU Load-line Calibration [High] CPU Current Capability [Disabled] CPU Voltage Frequency [Manual] CPU Fixed Frequency [500] VRM Over Temperature Protection [Auto] CPU Power Duty Control [Extreme] Vcore MOS volt. Control [7V] CPU Power Phase Control [Extreme] CPU VCORE Boot Up Voltage [Auto] CPU VSA VCCSA Load-line Calibration [Extreme] VCCSA Current Capability [140%] VCCSA Fixed Frequency [500] CPU VCCSA Boot Up Voltage [Auto] CPU VTT CPU VTT Switching Freq [1.3x] CPU VTT Over-Current Protection [Auto] DRAM Voltage DRAM-AB Current Capability [140%] DRAM-AB Voltage Frequency [Manual] DRAM-AB Fixed Frequency Mode [500] DRAM-AB Power Phase Control [Extreme] DRAM-CD Current Capability [140%] DRAM-CD Voltage Frequency [Manual] DRAM-CD Fixed Frequency Mode [500] DRAM-CD Power Phase Control [Extreme] PCH 1.1V PCH 1.1V Switching Freq [Auto] =============================================================== >CPU Performance Settings CPU Ratio [Auto] Enhanced Intel SpeedStep Technology [Enabled] Turbo Mode [Enabled] -------------------------------------------------------- Turbo Mode Parameters Power Limit Control [Auto] =============================================================== Extreme OV [Disabled] BCLK Skew [Auto] CPU VCORE Voltage 1.432V [Manual Mode] CPU VCORE Manual Voltage [1.430] VTT CPU Voltage 1.218V [1.20000] 2nd VTTCPU Voltage 1.046V [Auto] CPU VCCSA Voltage 1.212V [Manual Mode] CPU VCCSA Manual Voltage [1.200] DRAM Voltage (CHA, CHB) 1.762V [1.770] DRAM Voltage (CHC, CHD) 1.762V [1.775] CPU PLL Voltage 1.884V [Auto] PCH 1.1v Voltage 1.096V [Auto] VTTDDR Voltage (CHA, CHB) [Auto] VTTDDR Voltage (CHC, CHD) [Auto] CPU Spread Spectrum [Disabled] PCIE Spread Spectrum [Disabled] =============================================================== >CPU Tweakers'Paradise PCIE CLK Skew [Auto] CPU I/O Skew [Auto] CPU I/O Drive Strenght [Auto] =============================================================== >Memory Tweakers'Paradise IMC AB Signal 1 [Auto] IMC AB Signal 2 [Auto] IMC AB Signal 3 [Auto] IMC CD Signal 1 [Auto] IMC CD Signal 2 [Auto] IMC cD Signal 3 [Auto] DRAM CTRL REF Voltage on CHA [Auto] DRAM DATA REF Voltage on CHA [Auto] DRAM CTRL REF Voltage on CHB [Auto] DRAM DATA REF Voltage on CHB [Auto] DRAM CTRL REF Voltage on CHC [Auto] DRAM DATA REF Voltage on CHC [Auto] DRAM CTRL REF Voltage on CHD [Auto] DRAM DATA REF Voltage on CHD [Auto] DRAM Read REF Voltage on CHA [Auto] DRAM Read REF Voltage on CHB [Auto] DRAM Read REF Voltage on CHC [Auto] DRAM Read REF Voltage on CHD [Auto] =============================================================== >PCH Chipset Tweakers'Paradise PCH 1.5V Voltage 1.503V [Auto] PCH 1.1VG [Auto] PCH DMI Strenght [Auto] PCH DMI Skew [Auto] PCH USB Skew [Auto] PCH SATA3 Strenght [Auto] =============================================================== >VGA Tweakers'Paradise VGA1 Core Voltage [Auto] VGA1 Core Voltage Boost [Disabled] VGA1 Memory Voltage [Auto] VGA1 PLL Voltage [Auto] VGA2 Core Voltage [Auto] VGA2 Core Voltage Boost [Disabled] VGA2 Memory Voltage [Auto] VGA2 PLL Voltage [Auto] =============================================================== ***************************ADVANCED**************************** =============================================================== CPU Configuration Intel Adaptive Thermal Monitor [Enabled] Hyper-threading [Enabled] Active Processor Cores [All] Limit CPUID Maximum [Disabled] Execute Disable Bit [Enabled] Hardware Prefetcher [Enabled] Adjacent Cache Line Prefetcher [Enabled] Intel Virtualization Technology [Enabled] >CPU Power Management Configuration CPU Ratio [Auto] Enhanced Intel SpeedStep Technology [Enabled] Turbo Mode [Enabled] CPU C1E [Enabled] CPU C3 Report [Enabled] CPU C6 Report [Enabled] CPU C7 Report [Enabled] =============================================================== System Agent Configuration Inter(R) VT-d [Disabled] PCIE_X16_1 Link Speed [GEN3] PCIE_X16/X8_3 and PCIE_X8_4 Link Speed [GEN3] PCIE_X8_2A and PCIE_X8_2B Link Speed [GEN3] =============================================================== PCH Configuration High Precision Timer [Disabled] =============================================================== If this is not the right place, please move where belongs.
  2. It's already badly damaged, at least IMC, so there is no use for it other then to try to die as a hero bringing me some hwboints. BTW, it's ES, so no RMA.
  3. Hi guys. I need modded BIOS for my half-dead 990X, as I plan a suicide run with it to make it completely dead. I said half-dead cause it does boot at higher voltages: set vCore and VTT to 1.45, saved, took out my 980X, put 990X and booted. After few hours of testing, conclusion was that IMC is badly damaged and Cores are almost untouched. Core speeds of 4.8-5GHz were achieved at same voltages as before, but UnCore speed of 3.6GHz was barely stable at around 1.45V and 4GHz with almost 1.5V didn't boot, while it did at 1.375V before. Then the board tried to help me with my bad overclock and reseted everything to default. C1. The fun was over. Back to 980X. I would really appreciate if someone could mod BIOS F5C so it sets to vCore and VTT to 1.45 default.
  4. Thanks honda, it does have some kind of stability too...
  5. Here it is... 990X... Preparing for the last ride... Well, it's not all black. As I said, this is very good board... Memory timings as on s/s (RTL +2 +2) VTT=1.355V / 1.380V actual, vDIMM=1.72 / 1.715 actual. It is 0.04V less VTT and 0.06V less vDIMM then on R3E. Compare link here vCore=1.4375 / 1.4380V actual, 0.045 less then on R3E. This 980X is not bad at all.
  6. Common sense is not my strongest side although I wasn't pushing it intentionally so much over 1.65V and it was just for CPU-Z s/s. There will be new chip only if I buy one, cause this one is ES, no RMA.
  7. Thanks, and thanks for the heads up, I'll remember it good, well it will be carved in my memory for sure. I'm just sorry it never made the LN2 run, as I was planing one soon. This board just asks for it. I was just playing with VRM freq, it's low again. Tell it to the girls, as I almost feel like loosing one. Sorry to hear that. I hope mine would boot, so I can tell it's not dead completely, just crippled, veteran...
  8. I'll keep that in mind. Thanks. Yeah, I know, but never expected trouble around that corner. I was very cautious about VTT, as it is known to be higher then expected on this board. But it is always higher. vCore was spot on/slightly higher, and than jumped much higher. I know and accept the risk of overclocking, but this IS a problem with board.
  9. Of course, but not at that moment. VRM freq was at 800kHz IIRC. Usually didn't power off while changing freq, but I never changed it in Win, I did it while idling in BIOS.
  10. llc2 or whatever, higher one. But there was no load and it usually stayed as set in BIOS when idling, with some small increase in voltage under load, like 0.01, but no 0.05V.
  11. I'm having... hmm... experience with this board... It is very good so far, seem like CPU's need less VTT and vDIMM to run Elpida Hypers at 4000/2000/7-7-7-20-1T. But, it also killed my favorite CPU OK, it might have died anyway, but it's like borrowing a car to a friend and it breaks while he was driving. You will not hold him responsible, but it just leaves a bad taste in your mouth. Booted at 5GHz at 1.55V. Set vCore at 1.6V, pressed Multi+ once and made CPU-Z s/s at 5.2GHz. Restarted. Booted at 5GHz. Then set vCore at 1.645V (my 990X ran benchmarks many times at under 1.65V), then I pressed Multi+ button twice. Took CPU-Z s/s at 5.4GHz. Rebooted. Noticed that vCore is 1.7V. Set vCore again at 1.645 and noticed that it does jump at almost 1.7V (checked with DMM). Rebooted. CPU worked next few hours, while I was trying to make it run at 4.2/4.0/2.0@7-7-7-20-1T unsuccessfully, then it just stopped at C1. Dead.
  12. No, no, vice versa, but I got my answer... I need to have result(s) with extreme cooling, right? EDIT: BTW, what's with my join date? I wasn't even born back then.
  13. Are there any rules to be part of any league? I see none at FAQ's, yet I get kicked from OC to Enthusiast every now and then (few hours to few days).
×
×
  • Create New...