Jump to content
HWBOT Community Forums

Mahameru

Members
  • Posts

    125
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by Mahameru

  1. 22 hours ago, unityofsaints said:

    Nice result! Looks like you also can't get memory straps above 8000 running?

    Yes, people says memory multiplier above 8000-8600 does not works

    • Thanks 1
  2. 25 minutes ago, kaliz said:

    Hello, any chance to get x6o bios'?

    to get my G7400 really on the move? Tried all other x6 but cant seem to get passed 140 bclk, with both G7400 and 12400F. As a complete noob, I tried to select different microcodes, which ended in completely reseting bios to F1, after that, i could reload x6u. Then it happened again and bricking the bios (not completely sure as i didnt investigate further, it hangs on some error code,,, but i think only option will be Q-flash from USB hopefully...)

     

    Just saw Tantekaethe use this X6O bios on G7400 GPUPI 1b with around 160 bclk and 8000C32 for 3rd place. I have a proper chip, thinking with a good board and lots of tweaking maybe it can get top 5. 

    Thank you.

    Dude, X6o download link already on the opening page..

    • Like 1
    • Thanks 1
  3. 13 hours ago, wutske said:

    Aight, haven't had the time to get started, so here I am again ?

    I'm looking into buying a pot to do dry ice cooling. Currently have my eye on two

     

    The Volcano obviously will perform better compared to the ECOPot, however, I'm not really sure if the Volcano is going to work with dry ice at all. First of all, larger pieces of dry ice won't make it down into the pot due to the many fine openings but most importantly, there doesn't seem to be any seal at all between the core and the outer tube, so all the acetone will probably just leak out (and pretty much any rubber seal will decay due to the alcohol and cold temperatures).

    Am I on the right track or is there some magic thing I'm missing ?

     

    Hi, couple years ago I used KP Gemini for dry ice, I just use couple layers of seal tape between the bottom and outer tube and it works, no leaks as long as outer tube is properly mounted (enough pressure from the nuts)

  4. 5 hours ago, Rtxsupercase said:

    Now that are look closer your dram vdd/vddq is avarage 1.5/1.45? Why would you say that you are runnnig 1.45/1.4? 
    stock ram is 1.4 and you are running 400 mhz more by not increasing voltage of the ram just timing voltage?maybe you are running vddq cpu at much higher than 1.45?

    You can see the "current" value i HWinfo is incorrect, it shows 3.825.. that's why the average value cranked up close to 1.5 and 1.45.. I use CPU VDDQ 1.35 and CPU VDD2 1.45 btw, even for high frequency mem clocking (>8200 MT/s).. well, I can show you screen (8000 36-46-46 running MemtestPro with proper HWINFO) later when I back home

  5. 14 minutes ago, Rtxsupercase said:

    So, my z790 tachyon has no problem running xmp 7600 team group memory 1.4v

    Auto settings are

    vddq dram and vdd2-1.45 for both

    dram is 1.4 

    no issues at all….

    I would like to oc this ram to 8000 or more  if possible but I am not sure what to try any more seems like 7600 is what I get. Maybe I just do not know what to do and maybe someone has good profile for this ram to send me.  
    I tried keeping 1.45 vddq and vdd2 and raising 1.5V to ram to see if it would post 8000 but no luck. I tried lowering vddq and vdd2 to 1.4 and 1.43 no luck. I tried lowering voltage on the ram 1.45 and no luck. 
     

    running 13900k 5.7 4.5 no issues… 

    Again, ram kit is 7600 team group with 1.4 v stock… 

    You can email me profile if you have good one and cpu setting do not matter I can change that.

     

    i am starting to think gskill memory would be better. 

    What bios? try bios F2d first.. I use exactly the same memory as yours (TeamGroup 7600) and running 8000 36-46-46-128 daily. DRAM VDD/VDDQ 1.45V/1.4V, SA Voltage 1.2

     

    snaphsot0206.png

    • Like 1
×
×
  • Create New...