Jump to content
HWBOT Community Forums

edkiefer

Members
 View Profile  See their activity

  • Posts

    60

  • Joined

  • Last visited

 Content Type 

Posts posted by edkiefer

    XTU 6.4.1.12 ; saved scores disappear...?

    in Intel XTU HWBOT Integration

    Posted · Edited by edkiefer

    Hi,

    Yep, I saved and exported.

    With 5.2.x and 6.0 I could see saved scores, and actually 6.0.x would give those obtained on 5.2.x. If I try to manually import a score on 6.4.1.12 from a submission made on 6.4.1.12 (and from older version), it complains and does nothing.

    I had similar issue with a few of the 6.0.2.8 version but it didn't save scores numbers in profiles after a reboot. It also didn't save any OC setting on next reboot.

    That all got fixed in a few versions after, I don't really BM much, just use XTU to tweak few values over my bios settings for windows.

    I wonder if OC settings work after reboot.

    New XTU version v6.4.1.12

    in Intel XTU HWBOT Integration

    Posted

    Hi.

     

    Instaled the latest version on Maximus V formula, and no system information is displayed on the right handside panel, plus whenenever I click on Run benchmark, error log is displayed.

     

    Looks like this version sucks big time...

    Can t recognize the cpu and number of cores... (i5 3570)

     

     

     

    Got this message form another topic

    http://forum.hwbot.org/showthread.php?t=162384

     

     

     

    So I know 5.2 and 6.0 are ok with Ivy. 6.2, 6.3 and 6.4 are not. Will try 6.1 to see if it works

    I can tell you in 6.1.2.13, the BM works, I have never tried submitting results but it does work (displays scores etc and all cpu info is correct). I have not tried later versions.

    This is on Asus Z77Pro -i5-3570k.

    New Version

    in Intel XTU HWBOT Integration

    Posted

    Just tried "XTU Cheat" that has previously worked, system

    Asus Impact VI

    Pentium AE G3258

    Windows 8.1 64bit

    Was not able to produce bugged run with p95-bench.exe at realtime and perftune.exe at low/idle.

    Thanks so you have to set each with different priorities, I have tested with p95-bench.exe raised but i always got same scores on my system.

     

    I am just curious as I do QA for Processlasso, thanks.

    New Version

    in Intel XTU HWBOT Integration

    Posted

    ok, nothing is fixed with profiles.

    1) old profiles don't show.

    2)new profiles are not saved, shown in list on restart of XTU.

    3) crashes with show button.

    example, I can import or make new profile, click apply, all is good.

    now say i want to go to default (stock bios settings), click on default, and once I hit show button at top XTU does not respond anymore.

     

    Also on installation, my MEI is 10.0.39.1003 ,it didn't update to newer version like in readme, maybe cause I am on IB and newer is not needed, don't know.

     

    Guess I will stay on 5.20.14, its not worth trouble as i am not into BM.

    Just want to use XTU for small tweak in freq/voltage

    New Version

    in Intel XTU HWBOT Integration

    Posted

    here my results using Processlasso with my i5-3570k, version 5.2.0.14

     

    XTU 4300-4400 , Probalance enabled (priority lowered), 2 runs 775, 776

    Probalance excluded on p95-bench.exe (default priority), 2 runs 777, 776

    same as above but changed power plan to HP, 2 runs, 775, 775

    Same as above but set p95-bench.exe to above nromal (note it keeps toggling from normal to above normal), 2 runs 776, 777

     

    So not much change , this is on W10 so it hard to know what back-ground processes start running, also PerfTune.exe is set to high priority by default.

    New Version

    in Intel XTU HWBOT Integration

    Posted · Edited by edkiefer

    You can't opt out telemetry?!

     

    Yeh, you know the box that comes up when first run, I first click to not show again (this doesn't work). after I have it not enabled in that pop up, I go into setting where there it is enabled. I uncheck it and next time I run it , it is back to like first time I ran it.

     

    It does run last OC, but any other saving doesn't work.

    The Intel telemety I can see is set to 1 in reg too.

     

    I have a few GUI.logs and I see err messages in there, so if you want it I can give it, might help.

    I could also post it here, not to big.

     

    Ok, another problem, if I click on default profile (to get back to stock clocks) and as soon as I hit show button at top XTU crashes.

    Going to reinstall and see if that helps.

    New Version

    in Intel XTU HWBOT Integration

    Posted · Edited by edkiefer

    Ok, Installed 6.1.29 , I first set XTU back to default profiles.

    I unstall the old 5.2 version, it asked if i wanted to delete old profiles, I didn't check that off and uninstalled.

    Install new version, go to profile tab and no profiles listed.

     

    So I first think uninstalled deleted them, So I check a few paths and find them here.

    C:\Users\Ed\Documents\Intel XTU Profiles

     

    I made new profile and its not stored here so saved stored profile must of changed (will check in XTU info page).

    I didn't BM but this version seems to save clocks fine on reboot.

    I also notice no watchdog listed in program files.

     

    Ok, its not saving any profiles next time I start it.

    If I hit import I see old profiles and can import them and run them but again, next start of XTU and no profiles are show in porfile tab.

     

    Edit: It also not letting me opt out of telemetry either, its like every setting is not saved.

    Also should it of updated IME, normally each version of TXU updates that along with install.

     

    I am on IME 10.0.39.1003

    New Version

    in Intel XTU HWBOT Integration

    Posted

    it did save my oc, i booted up this morning and it loaded my saved profile.

     

    when i have balanced power plan set, and i run XTU bench, the score results will show my overclock lower than what it actually is. i am running 4800mhz, but XTU will show around 4530mhz or something like that in the results of the bench score.

     

    My bad, i misunderstood, I didn't run benchmark, I just ran the CPU load test and looked at graph (clock speed) with both power plans.

    Thanks for conformation it saves OC setting.

    New Version

    in Intel XTU HWBOT Integration

    Posted

    im not familiar with the "bugged high score". i installed v6.1.2.9. my overclock is set to 48x100, and windows power plan set to "balanced", the benchmark result in XTU reads the cpu frequency at like 4530mhz, and the score is a little higher than if i set to "performance" mode, where XTU benchmark reads the correct cpu frequency, 4800mhz, but the score is sometimes lower. IDK :\. i know the score fluctuates a little, but XTU's incorrect reading of the cpu frequency when windows power plan is set to balanced makes the score look a lot higher than it should be

     

    I get same CPU clocks no mater power profile in 5.2.014 .

    What does CPU-Z show and are you getting same CPU% running both power plans.

    I know Skylake with Win10 adds some new power management ,maybe that can affect too.

     

    You didn't happen to see if XTU saved your OC (if you made any) in XTU, version 6.0.0.22 wouldn't save any OC settings on reboot for me.

    Wonder if thats fixed, will have to try when I have time.

    [BUGS] Let us know if you experience issues!

    in Intel XTU HWBOT Integration

    Posted · Edited by edkiefer

    Its been a while , nobody else has the issue i mention above (no watchdog, no saved OC settings on reboot)?

    I checked readme pdf and only thing mentioned was KMDF 1.11 which I have installed already .

     

    With 6.0.2.8 I lost watchdog some how (not listed in installed program files >Intel watchdog timer driver), info page also shown it not enabled .

     

    Was thinking of moving to Win10 but does version 5.2.0.14 work there ?

×
×
  • Create New...