Jump to content
HWBOT Community Forums

serpent_710

Members
  • Posts

    1
  • Joined

  • Last visited

Everything posted by serpent_710

  1. Hi! First of all I would like to thank everyone! This made it possible for me to mod my Maximus IX Apex myself. At first, everything seemd to be fine but unfortunately it came to a problem. I've installed the i7-9700k (R0 stepping) and flashed the BIOS from dsanke (ROG-MAXIMUS-IX-APEX-ASUS-2402) (great job dsanke!). System started and booted to bios ( yay ) So I decided to install my gpu (asus rog gtx1080), closed the case and wanted to proceed with os installation. At this point, the board is not starting anymore . The aura leds are on, but if I press the start button (board or case), I noticed that the system wants to start up for about 200ms. I barely see the flashing LED from my Corsair AIO (H100i Pro). My first thought was, that something is wrong with my soldering. I've resoldered the mod (bios & cpu pad) on the motherboard and flashed the BIOS again. No improvement. So I decided to remove the cpu pad mod, install the i7-7700k and flash the original BIOS (1302). Same problem as I mentioned before. Aura leds are on, system is unable to start. I also installed the speaker. Status leds are off (cpu, ram etc.) and no codes are shown at the 7 segment display. My assumption is that something is shorted or even broken. I've no idea where I should start to search for the problem. Maybe somebody has some tips or ideas that could help me. Thanks a lot in advance.
×
×
  • Create New...