Jump to content
HWBOT Community Forums


  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by sabishiihito

  1. sabishiihito

    Zadak 511 Shield DDR4-4133C18 short review

    It would be interesting to revisit this topic now that we know a lot more about A2 PCB compatibility. Anyone still have any of the Zadak sticks?
  2. sabishiihito

    Hands on DDR4-4600 C18 G.Skill TridentZ RGB

    Sounds like what happens to me when I try benching at 4600-4800. No amount of SA or IO seems to help, either.
  3. And I thought the X299 MEG Creation was expensive!!
  4. It's possible to buy an add-in PCIe SATA card with an Asmedia controller.
  5. I can't get my SPI flasher to even detect either BIOS chip on my M9A. Using a TL866CS and clip.
  6. I didn't think XP worked at all on this board anyway (well ACPI HAL install at least).
  7. Where'd you get that newer Dang Wang Memtest?
  8. Coffee Lake no need? Old 7600k putting in work with A2 DIMMs
  9. sabishiihito

    X299 RAM OC

    Hmm, may have to see what I can accomplish on the Asrock X299 OCF
  10. Retail BIOS for the Z270 SOC 4-DIMM board works on the LN2 but I suspect since it isn’t tuned for 2-DIMM that it is holding the RAM OC back.
  11. I suspect not much effort going into KBL-X support on X299 boards, especially since Intel has EOL'd the products.
  12. Sorry to hjiack, but if any of the parties also have BIOS for the Z270 LN2 version as well, it'd be much appreciated
  13. Never mind the RTLs, I was just trying it out.
  14. Loss of perf with those timings so loose though
  15. M8I already works with A2 DIMMs.
  16. So are F and G better with 9xxx training those speeds or are the newer BIOSes just worse in general?
  17. sabishiihito

    i9 9980XE

    From all the testing I’ve seen on YouTube from the likes of der8auer and Steve from Gamers Nexus, it’s just a refresh of 7980xe with solder that can’t be delidded without killing the chip, so...yeah.
  18. I have two sets of those and mine are the same, 4133C12 32M not possible.
  19. sabishiihito

    Kaby Lake

    What country?
  20. I hope you guys got free samples and didn't spend $600 on a Z390 board.
  21. sabishiihito

    Hands on DDR4-4600 C18 G.Skill TridentZ RGB

    Looks like you're right, this kit was 4133 and is clearly A2:
  22. sabishiihito

    Hands on DDR4-4600 C18 G.Skill TridentZ RGB

    Xtreem 4000 should be A1 shouldn't it? I know the 4500 kit I had was. https://www.teamgroupinc.com/en/product/xtreem-ddr4
  23. Crazy how high binned B-die kits doesn't guarantee extreme OC ability. I have a lowly set of Trident Z RGB 3600C17 that will happily boot into Windows XP 4133 12-11-11-28 1T, but a kit of Team T-Force Xtreem 4500 wouldn't.