dmytri2009
-
Posts
11 -
Joined
-
Last visited
dmytri2009's Achievements
-
See the first post! NOTE! Do the bios flash after hardware mods are done !!! Soldering cpu pads is not needed . Known issue is that HT does not work currently on 6c cpu's hence it is disabled by default. After everything is set-up board will work with cofee lake based cpu's as well as with older cpu's without issue. Have fun !
-
Почитай внимательно тему. Зачем уродовать доску, если достаточно прошить модифицированный биос. И я бы рекомендовал писать на английском, больше шансов, что тебе помогут.
-
На фото не микросхема биоса. Две флешки обвел на фото. Шьются программатором через SPI-разъем под ними. Доски 9го и 10го поколения идентичны.
-
As I know you cannot flash modded bios over stock one with asus flashback feature. You need to use bios hardware programmer to reflash it. I recommend to flash v. 2603, it supports all modded laptop cpu's.
-
Go do it by yourself
-
It's out of any useful improvements.
-
There isn't Windows 11 released yet, but I'm sure, if your stuff can work with Win10, it can work with 11 and 12 too ?
-
M10A 2603 BIOS version transplantation for M9A with Resizable bar support by dsanke https://www.mediafire.com/file/5dugae6mqdv0kf5
-
Use QQLT or QTJ2 CPU, they aren't needed any intrusion in MB hardware, only a moded bios.?
-
To flash this bios mod you need to use hardware chip programmer device, like this one
-
https://www.mediafire.com/file/9di63jw78loeks6/ROG-MAXIMUS-IX-APEX-ASUS-2503.7zip/file
