Jump to content
HWBOT Community Forums

ajdahoPl

Members
  • Posts

    10
  • Joined

  • Last visited

Everything posted by ajdahoPl

  1. guys , yesterday i changed the paste on my liquid devil , the temperature delta between the edge and the hot spot decreased drastically from the original 30-35'C to 17-20'C ,(i also noticed that the block was poorly tightened) , while i dont understand why my oc dropped , previously 100% stable in games was setting wattman clocks min/max 2600/2700 in 3dm time spy, sometimes it would crash, on these settings I did my record 22131 gpu score, after changing the paste despite lower temperatures I will not pass time spy on clock settings over 2550/2650 - that also too much 2500/2600 What could be going on? One thing I noticed is that before changing the paste, with clocks set at 2600/2700 real average clock in 3dmark is 2600 now it is higher 20mhz, but I can not complete test 2, and sometimes even in the first test crashes, drivers also reinstalled DDU in Safe Mode
  2. Never say 100%😋 and how was it with the radeon vega? I've uploaded from 64 to 56, and I think from 7970 to 7950, but there is always a BIG risk, that's why I ask if anyone here has already done it
  3. guys is it possible to load liquid devil 6800xt bios from liqud d, 6900xt and does it work?
  4. but this is a new card bought yesterday, I do not want to break the seal without being sure that everything is ok, I am afraid that maybe the factory did something wrong during assembly
  5. I know, I read it in the meantime, but thank You , there is one more thing that concern me, namely a big difference between the GPU temperature and the junction temperature, about 25-30'C, when I look through the tests it seems to me that in the testers it would be a difference of 15'C at most, in games on my card is like 48-52'C gpu , junction around 70'C and when I run furmark I have 60-62'C on the gpu and 97'C on the junction, power consumption then shows 380W, because I set it that way and this is my 3dmark score looks OK ? https://www.3dmark.com/spy/21658031
  6. Fellas, today I bought a 6800xt liquid devil, I'm playing around with the oc, now I tried to use the more power tool, but after changing the voltage on the gpu to 1200 and the power to 350, the card boots up at 500 mhz what am I doing wrong? i also try Buldzoid metod from YT but anything help
  7. to the authors of the x5a bios for the z490 master I would like to congratulate you on the work done, gentlemen, excellent job, thanks to this bios I can adjust the RTL values on my board (IoL values still not) which allowed me to measurably reduce the latency on my RAM memories, and I was already devastated by the choice of the gigabyte mobo but I regained my joy
  8. Hello gentlemen, could I ask for some current link to a proven bios for the z490 master, it is best if there is one that allows rtl and iol control with 4200mhz + memory
×
×
  • Create New...