ROWDY XOC

Hello all! So I have been trying to get hold of a 3090 Kingpin card in the UK now since launch. However, like most I have had no such luck?!! One of the main reasons I have been sticking to the Kingpin is because the classy tool is very much available to everyone and the card is kitted for overclocking without the need for shunt modding etc. I do intend on using Ln2 in the future so feel this is a relevant factor. I have been looking into the GALAX HOF cards and would love to pull the trigger on one, especially as they come up for sale way more often in the UK however I am apprehensive to do so as I have read up about their NVVDD Tool and it appears it is not just available for download and you must reach out to GALAX directly, I have done this but as I expected I have not had a response as of yet. Can anyone advise me with an alternative way to obtain the tool or am I just wasting my time? Thanks in advance ?

Brilliant thanks very much for your advice ?

That sounds just what I need, Thank you for sharing! Just to double check would you advise its ok to use over a long period of time I normally renew fluid every 12 months or so?

That’s a good shout is this something you have run? Also what is the main benefit of using screen wash over antifreeze, I assume it’s less aggressive? Thanks! I have listed all my subs with air conditioner as “chilled” ?

I'm sure this topic has probably been exhausted but please bare with me. I use a modified air conditioner to cool my loop which never normally gets close to sub zero temps, However due to this recent nice and cold UK wintery weather yesterday the coolant in my res turned to slush! big panic my side as you may imagine! So my question is, is it ok to use Antifreeze in my loop? Its not something I wanna gamble with if it has the potential to eat away the seals over time in my water block etc. If anyone has any advice or experience with this it will be greatly appreciated. ? I'm using Ek supremacy block (acetal) D5 Pump Soft tubing EK Res

Benched with Realtemp as advised and my thermals were a little too high which was causing it to throttle down. I Adjusted a few settings to help keep the temps down and it started to scale properly scoring a 40510 in physics! Thank you very much for the suggestion Leeghoofd I will be using Realtemp more often as it seems to give a far more accurate representation over other monitors I currently use ?

I have downloaded it and will give it a go tomorrow. Is it normal to only show 6 of the core temps? I'm running GT

Sorry Leeghoofed major typo on my end ? I'm scoring around 36100 ish I have edited my original post! This may be on the money for the hardware but was just shocked to see no improvement working up from 5.2ghz too 5.3ghz, and with it only utilizing around 76% of my CPU it just had me wondering if I have missed something in possibly an os setting?

I have been running the 3D Mark Fire strike benchmark this afternoon, I normally run a 5.2ghz overclock (chilled water) on this bench but thought I would have a play with 5.3ghz. My normal score for physics on 5.2ghz 1.38v would be around 36100 ish however when I bumped it up too 5.3ghz 1.48v there was pretty much no change in the score. I checked my thermals in Aida64 to make sure I wasn’t throttling and Double checked the clock was applied and all seems to be in order. The only thing I did notice was that my CPU Usage was around 76% throughout the bench mark. Can anybody confirm if this is typical behaviour of the benchmark with the 10980xe? If not does anyone have any idea how to get it to utilize closer too 100% without setting realtime as that just causes other issues. I use a stripped down os specifically for benching so there is little to none going on in the background. Any advice will be greatly appreciated ? System specs if it helps: 10980xe x299 dark Gskill trident Z 3800mhz 12-12-12-26 1T 2080ti kp 1600w PSU Chilled water

Looking for Z390 dark at a reasonable price ?

Just waiting for slightly better weather and we will see if I can shoot past ya ?

Oh I didn't know I could do that! I'm going to sound like a complete noob but could you explain how I submit manually as the verification link has got me confused? Looking forward to a new platform this issue has my head spinning

Thank you for you're response I have changed my future mark account username to the same as my Hwbot username but it sill persists with the same error!

Hello, I am new to hwbot, I have read the rules and it states for 3dmark benches you need to link your hwbot account to your futuremark account. I have attempted this many times however I receive the same error message as follows: /O error on GET request for "https://hwbot.org/api/login?username=+++++++++++++++++++:sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target; nested exception is javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target (i have removed my name & password) I have tried doing this on 2 different systems and locations also on my phone just in the off chance it might make a difference, updated java I have even tried making new accounts both 3dmark and hwbot however with no success. I would appreciate it greatly if someone could shed some light on this?!? Thank you in advance