So i did some tests:
RTX A2000 cases:
1. Fanless - fan power over 3PIN conntector to Molex 100%
Temp: 40°C 45,924MH/s
2. Watercooled
Temp: 20°C 45,928MH/s
Both runs in the max gpu powerlimit of 688mV.
When i do now some calculations:
70W = 45,928MH/s -> ~1,524 multiplicator
50MH/s * 1,524 = 76,2W
When we take a 0,5W resistor, we need 77W!
To replace the 5mOhm with 4mOhm isn't a good idea 87,51W!
I prefer for exactly 77W a 50mOhm resistor with 0.5W.
or 45mOhm to have a little bit more power.
Slot power 50mOhm: 82,5W
Slot power 45mOhm: 83,3W
This is in my eyes safer as 20mOhm
New power limit: 87,51 and slot 93,8!
Is there other hardware around as the PMD from ElmorLabs?