Jump to content
HWBOT Community Forums

zoran.suncokret

Members
  • Posts

    3
  • Joined

  • Last visited

    Never

Everything posted by zoran.suncokret

  1. hey I manage to oc manually to work stable at 4.4ghz with 1.2 v and not to pass 40c on idle, 70c on full load , also clocked ram to 2.4 manually , now all work stable .
  2. Hey man, ty for reply . I think i found solution in order to work stable, but still clocked. What i did, enabled turbo boost so my cpu is now on 4ghz , enabled xmp1 in advanced settings works on 2.400mhz, i passed win exp. index. Also, made pump run at full speed while cpu is at 40c and on full speed when cpu reach 55c. Before in bios was seted up pump to work full when cpu reach 20c and 75, in both case is nonsense. Cose my cpu is never on 20c and only on full load is on 75. Now i've got 35c on idle /60-65c full load , and look like system works really nice / smooth . Voltage is 1.2 on full load and 0.8-1on idle . I am happy now works good, will test more when i have time .
  3. Hi all, i've got few questions, cose i am total noob for oc and stuff... I have following : 4960x sabertooth x79 (bios 4608) 4x4 quad kingston beast 2400mhz water cooling : cm nepton 140xl seasonic 1000w plat devil13 7990 hd intel 730 ssd 480gb thermaltake v71 with 4 fans inside for good flow inside I've tried to set XMP profile 1 in bios , than xmp profile2, and bios automaticly clock memory to 2.4ghz and turn on turbo clock on processor and clock to 4ghz . And that was not stable, i've got overclocking failed msg 1/3x after bios load up , than i've got some problems during stress test / bsod showed up / couldnt pass test's etc. Now, i just turned on Performance mode in bios, and look like bios clocked this very well this time, turned on memory to 2.333mhz , and processor on 4.12ghz . I would like to ask is this temperature good / reliable for stable work : http://www.dodaj.rs/f/H/Vs/1Y3vrVlk/untitled.png i really need high speed memory for my work cose i am using it a lot ! i have tested this with intelstress test and it worked for 5minutes and everything was fine/pass test also with picalculation all was ok. But temperture was max 80on full load , and on avg. was 65-70 during full load. During my work i am not use full load i am using load on picture above. I just did XTU bench and i got 1249 mark and highest tepm 78c. It also throtelling from 1.304v to 1.296v, and 4.124mhz to 4123, but i guess thats nothing Hope to hear from you all soon Ty
×
×
  • Create New...