ogblaz

All OK in win7, I tried another WinXP image but got stuck at installing network components... Is OK to use older CPU-Z in the rules you need latest version? As I will not be going for the records only fun benching and this is not the best LGA 1366 motherboard I think I will be ok Thanks, Blaz

Thanks for answer! The CPU clocks are there but no Memory clock and no timings. I will try different xp for now maybe 7 next A lot of time wasted Have a good day, Blaz

Hi! Bought this motherboard off marketplace with i7 930 and i7 950 . All went OK when installing XP`s and I made the changes from luumi`s video on yt. When I installed CPU-Z 2.09 the thing doesn`t open! Its stuck at loading at 12-15% ... If in .ini I put PCI to 0 it opens, but its missing some specs. Is this ok for validations? The same is with 2.08 . I tried different rams, tried both cpu`s, the bios was not the latest I updated and still the same. I didn`t try different OS that is my next thing to do. Maybe some hardware problem, the board is old and who knows where it was for the last couple of years Thanks, Blaz

Thanks man !

775 socket cpus go for 1€ a peice if you buy bulk. I have 200+ to bench and I didn't pay more that 150€ for them. But they don't get you many hwbot points.

You bought good wutske, I wish you some good scores and can`t wait to read how it went. Have fun, Blaz

Thank you guys for your help. I will order today! I would still like to buy some of the "good stuff" hit me up if you have some.

Yes, you read correctly I hope I don`t look to cheap... I only bench 775 cpu I use GD900 on my cascade or single stage. I want to use something better on my best chips. If you have some extra paste you don`t use kpx or. kryonaut send me a message. It can be opened I don`t care ... quantity and price with shipping to Slovenia. Thanks, Blaz

Hey, I still want some good thermalpaste some bucks cheaper!

Thank you! That load is for the whole motherboard, power meter on the outlet. Connected PSU, motherboard, gpu... without monitor. On stock settings mobo is drawing around 100W, highly overclocked is drawing 430W. Around 300W I think the CPU is consuming.. i may be wrong. Yes I did try wprime1024 the temp is the same it holds around -42°C on the evaporator, cinebench r11.5 put a little more stress to the cpu looking at the power meter.

My second attempt 20ccm compressor for R410, not the best option but it was the cheapest I could find used. Bartx old design 44/50mm stepper on flex tube 1mm captube 2.3m, some bling with gauges and sight glass. It is filled with R404a 520gr. It preforms better than the first one but the compressor is bigger 2x, (10ccm vs 20) . The most power I can get out of the socket on gear p5q3 q9650 is around 430W(load cinebench), the temp on the evaporator was -42°C . I don`t know why the pictures doesn`t work anymore on the old posts... Have a good one, Blaz

Vulcano looks much better performer on LN2. On dry ice maybe both are the same if you go full pot. If you will use LN2 in the future I would go with the vulcano and use tape as Mahameru suggested but I would use alcohol not acetone if there are leaks... Also if Elmor sends from China you will have tax to pay if in Belgium is the same as my Slovenia, Bartx is from Poland so no tax there. If there are much more shipping/tax costs from Elmor, maybe you can contact Bartx if you can get the honeycomb with some kind of a discount if is possible. All I want to say it is more money and a lot of it but you should buy once and buy good, the pot is the only thing you will not replace, it will be with you all the way. I wish you all the best, Blaz

Still holding, luckily not my breath Thanks, Blaz

I would also like to order one. Any news?

https://hwbot.org/submission/5269516_ogblaz_geekbench4___single_core_core_i5_4690k_4988_points Wrong benchmark...sorry. Blaz

up, accepting offers of course

Hello, Somebody wants to be a Pentium 4 650 overclocker ? I bought LGA775 CPU bulk and there is just to many of the same, I am not that much of a binning freak This is all untested and uncleaned selling as is. Maybe there are some gold chips in this pile! Price for all 100€(less than 2.5€/cpu) + shipping from Slovenia( if there is any interest I will get a quote for you ) Thanks and have a good one, Blaz

Forbidden You don't have permission to access this resource. I will force it by hand for how much I can and I will not waste and more time with this other than bench my 775 collection EDIT: Found the picture... I see how it should be, my SS is working nicely so I will leave it like this... maybe it is even better for flow because there is not so much height to climb. With 500g of refrigerant, I think there is no worry that vapor can enter my captube... I could be wrong Thanks man, have a good one, Blaz

Yes! I did that a week ago after I read that the filter must not be horizontal . There was a topic on xs where somebody wrote that liquid line should be as low as posible... if you see on my older pictures how the filter was positioned. Now I have it like this, is this OK or I will gain someting if I put it vertical? Thanks for your reply!

Changed the compressor to a rotary one from AC. Also changed the captube from ~0.6mm(2.5M) to 0.8mm(1.8M) . I think the evaporator is chilly1 design. Had to solder 4 times the evap, always small leaks sometimes here sometimes there... If I would do it one more time I would desolder the evap, clean and solder in one go. On the numbers side now from the wall power draw 380-400W this ss can hold around -36°C . At lower loads it holds ~-45°C . The gas is R404 500g. All above 430W the temperature slowly rises to +0°C . On the pressures low side at load 0-0.5bar, on high around 12. I don`t think I will change the design or make any more changes because it takes too much time. Thanks, Blaz

Thanks FUGGER, I will increase the captube and see what happens. I will probably change the compressor for the rotary one... i hope to get stable temps for my loads. r134 one start to complain at higher pressures like low 0.5bar high 12bar if I overcharge... We talked about the evaporator, you didn't get back to me with the shipping price, I don`t want to bother you if you are busy, I will make the best with what I have . Thank you all, I will update when I make some changes.

I have a watt meter and if the whole bench table (mb, cpu, gpu) uses around 200W the single stage holds load -40°C or colder. Even in long tests or cinebench. If the wattage is more than 260W, the temperature raise slowly to + temperatures. On some dual core pentiums I saw 400W + If the wattage is lower than 200W(150W) the suction side does freeze up, but there is no noise from the compressor that liquid is entering it... the temp is around -46°C at that point. The pressures are slight vacuum on low side -0.3bar ish and 11bar on high side. I even put a pressure switch for the fan so the high side was 12-15bar but didn`t help much. The captube is small, maybe 0.4mm... will added flow from 0.8mm help at load? I thought so... then there is no point to use rotary compressor? Thanks!!!

I didn`t get another evaporator to date, but I got another compressor. Its a rotary compressor r410a with markings I can`t get a datasheet (5ps102), but I found that this should be a 10.2ccm unit with 2kW cooling capacity 6800BTU. Its not a strong compressor.. so is there any gain from my r134 embraco nj6220z , 1 HP, displacement 26.11 cm3 ? I also shorted the cap tube for 25cm but it didn`t change much. I have at my disposal a 0.8mm captube that I think to use. Bigger captubes are only sold as 30M bundles... Thank you for your help, Blaz