matose
-
Posts
256 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Posts posted by matose
-
-
Here's one from an anonymous participant: "Mem: best compared to HWBOT 3D11"
Any translation available?
Does that mean the memory overclocks good or what?
-
I will bring some epicness with me
-
Doesn't matter because at the Grand Finals the CPU and tweaking will be more important that the VGA card. Even so, the TT 1350W will have trouble holding over 1500MHz 3D11 which any decent Lightning will do !
-
Hey guys just wondering, for those of you who already got their flights booked; when will you arrive the 6th?
Around 21:00 TPE time
-
Congrats man, you deserved it!
You removed IHS, lapped it and reattached it? Or just lapped it?
-
We are in
Let's support OCTV together
-
You didn't bin enough
-
Inspector & RivaTuner FTW
The best CPU with some decent tweaks will win
-
GPUTweak allows higher volts only if you flash GPUTweak.bat firmware on MATRIX!
The software will work on DCU II also but you will be limited to normal voltage limit (must edit BIOS for higher volts)
Good luck!
-
Hmmmm..... for what?
-
Yes, I think XE is a wise choice for fairness... but everybody will be struggling to get 1200Mhz on MEM... ha ha
-
Problem is also that you cannot use Control center, will they provide us some tool to rise bclk from win, because boot at high bclk on Msi board will be impossible...
No, just BIOS
-
You know that power usage gets higher also with GPU clocks, especially on Fermi arhitecture?
The problem is the "wheel of fortune" with CPU binning. If you pick a bad CPU you lose SPI32M and 3DMark01 so you can go home...
-
If you feed the VGA from 12V1 and 12V2 I think you can reach almost 1600MHz. ~1500MHz only from 12V1 was possible though...
I confirmed with MSI and there will be special signs on the VGA's that will be send and also SN and GPU batches for every single card. This means no IHS removing and no lapping the IHS
-
Dude... 3DMark01 is even more CPU dependent that 3DMark03 used in EMEA Finals. If you have luck with the CPU you win 2 rounds (SPI32M and 3DMark01) and the VGA will count only in 3DMark11
-
I'm interested also in how they check the VGA's . Using Extreme Edition Lightning will be better for the sake of fairness because nobody benches that card
P.S: I don't think they will use 3dmark01 because on Win7 with limited tweaks it's absolutely no fun and also MSI lacks a good 01 BIOS for their MB...
-
yah it's tweakable. It's simple mix uber fast cpu with 2x 6990 + no tesselation...
Not only Try to get close to 6000 with 4 GPU and you'll understand what I'm saying
-
Don't think Expander will help because it has 2 x NF200 and also SB is better than Gulftown in Unigine. Maybe some 6500MHz+ Gulftown could match SB at 5900MHz...
-
Thanks! Unigine is tricky, there are a few tweaks and tricks to obtain high score with 4 GPU's
I think >6100 is possible, will try after I get back from vacation
-
Nice score James. You really like this old benchmark
-
Pieter, do you know why I don't get WR points for the 5th overall 3DMark01? I should be getting 30 points from what I can understand...
-
On AMD cards it's done from the driver not from the benchmarks settings. It's not completely OFF but set on the very first level so I think it's legal
And no, it doesn't look like your screenshot!
-
We had twice frames for 1373XX but it crashed in Nature because the CPU was too high. Maybe next time...
-
Cooler master ICE fusion. 40g tub, super cheap .
2 different pots and 5 runs no crack.
Nice find, do you think it's better than Freeze regarding thermal transfer?
No crack even with full pot?
The big MSI MOA 2011 thread: information, videos, comments and more ...
in HWBOT Competitions
Posted
990MHz GPU in 3DMark11 here, yours is worst?