Jump to content
HWBOT Community Forums

Lucky_n00b

Members
  • Posts

    997
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by Lucky_n00b

  1. Nice! I'm considering LM earlier but didn't do it because my block is pure copper and LM will stain it - maybe I'd find some nickel-plated blocks and try again with LM. Keep pushing it, cheers
  2. Unfortunately I have tested very small numbers of samples for Hynix DJR (only 3 kits total, this hyperx 4600, V-Color 5066, and a local RAM brand called V-Gen rated at 4600), so can't really be sure if the PCB component making much difference between these 3, all used what looks like 'A2' PCB to me. From my side it's the memory controller on CPU that might be more important, from 3 RKL CPU I have, this particular one managed to boot at DDR4-6200+ on ambient, while the other two won't budge past DDR4-5866 even with the same exact board, RAM, and voltage.
  3. Need clarification : Showing all R23 window + the rendered screen without cpuz/benchmate obstruction mandatory? *If yes then probably need DSR/VSR to 1440p
  4. Not bad? That is GODly for a 50 USD kit - I'd happily pay 150 USD for this kinda stick hahahahah
  5. Thanks! Me too, I was not expecting this micron to be this strong for clocks, (but then again I don't usually bench micron kits in the last 2 years), this is best sticks out of 4, I got big variation between them, maybe because this comes from lower bin model (3600MT/s), but the worst stick still managed to boot 5500+.
  6. Hahahah still pushing for Stage 2, no worries Dad 😛
  7. Have to call GG on this competition, those DJR were very strong indeed! I tried to push the rev3.32 microns as hard I possibly could, frequency is priority for AIDA64 read but my DDR4-5466 18-24 wasn't enough to catch up the b-die level let alone DJR, got good learning experience out of it anyway. Waiting for the Lucky Draw then 😛 - keep pushing it bros
  8. I like no. 4, listing the 12900K as default to compete in 16C, and 12900K (8P+0E) And maybe use same rules for other mixed core CPUs (e.g on its own as total number of cores, and only the number of performance cores)
  9. Now I'm praying no major hw release inside the competition timeframe, so I have time off work to have fun in the comps Btw, I haven't seen platform/cpu restriction for this, so any DDR4 cpu/platform (as long as its retail) might join?
  10. Thanks - About the 1T, I got similar experience. But after checking with 2-3 CPUs, it seems that this 1T Gear 1 capability is also dependent on CPU (I got other samples that can do 1T at 3733, but cannot get it pass 3800 Gear 1 even at 2T). About the RTL, I just started exploring couple board, got sent an APEX and Tachyon, might explore that area after I'm done with review work :)
×
×
  • Create New...