Patriot

"Just saw your comment about cpuz.. Write Franck and send him a download of the files.. Your cpu's are 22nm haswell based xeons so should be able to be seen " No they are not... these are IB-EX E7 class chips... All the more reason they should be seen. But IB-EX adds some Itanium features to X86 chips.

Part of me really hates you for using something at work to break my record that I have held a year and a half. The other part of me laughs at it taking a 50k server to do it. How many ram risers do you have in and what config is your memory? I think it is time to see what my 580 can do in cinebench.

Why all the hate against Multi-thread. Limited to Z87 ... that is hardly the most memory bandwidth friendly platform. I have my WR to thank for the G.skill ram I used on a 4p system. Terrible platform limits, terrible program choice.

I suggest adding FAHbench as a gpgpu benchmark it scales very well, works on AMD, Nvidia and Intel GPUS. And well anything that runs OpenCL so CPUs as well. http://fahbench.com/

Not sure if this will help with reading what you want... But I find TPC (Turion power control) very helpful for overclocking and monitoring AMD systems. Sounds like you may just need to break out the BKDG from the richland gen. http://amdath800.dyndns.org/amd/

I agree, it was also overly heavily weighted on the gpu side by having single and all out.

if you have HT on this should be in the 64 section not 32...

the GT-15s are actually rather quiet... now... I might cause a state-wide blackout...

"Score should be fine ATM but keep in mind that ANYTHING you bench needs CPUZ Mem tab." Sigh... that is under the General section... and says these things are normally required... Under specific things it says no rules... Now... I chose not to go into Law but if you want that to be the rules you are going to have to change the wording because currently I am well within the letter of the rules. You have already bothered me about this set of runs btw... So please take a look at the date on the SS before commenting.

All of the other sections like wprime list explicitly what you have to post... cinebench explicitly says there are none. And in the general section... under screenshots... "In general, this is required:" You will also note it does not require them to be on the same SS... So technically I am in compliance with the letter of the guidelines... But as I said... All these runs were done in a 2 day span and posted the lowest when I was completed. ... All future runs will include a memory tab to comply with the general guidelines for submissions. I wish I had found the general guidelines before I made the runs...

I made these runs after reading the cinebench rules... which do not require it... After comments on my lower runs I have added a SS of one of my other benchmark runs at the same frequency that required the memory tab. As the system is down with a dead board I cannot currently supply these with cinebench but I do plan for higher runs before the competition is over.

All of my runs are from the end of January before I roasted the board... but rest assured I will have a new board before the comp is over and clock higher. Then again... its not like this is my highest score

I am surprised beckton got his high of a score... I have played with a 4p of the E7-4870s and their performance was much worse than what you have showed there...

Funny you mention that... Mine folded at 3.48ghz for about a week before blowing a gasket. 6:38 on an 8102... https://picasaweb.google.com/lh/photo/EGNXSMPSzAG5mER7nP-fyAPOfCxVqcnOjX2ToOvXPvg?feat=directlink Showed no signs of weakness during testing... Got this GL used and it was unstable at stock... it was finicky. I flashed to an older bios and it seemed to stabilize... Then I overclocked it like crazy and it seemed fine. Folded for a week and a passive component on the back of the board failed. but it was very finicky before I even overclocked it... So I am not sure what went wrong. I was keeping the VRMs cool had nice ram sinks on them. I have not had the time to replace the board and keep going but I plan to over the summer if I can't ship it off soon. Oh and yes you are still trying to beat my scores I set back at the end of January. I will not speak of how many higher ones I am still sitting on... Also... what "mods" have you done to your board?

Hot damn...Nice. brb