Search the Community
Showing results for tags 'voltage'.
Hello OCers. I have a question: what is VCCU voltage for? The answers from ASROCK in the OC Formula Manual are as always nothing more then a one phrase. Do you know what setting should be inserted at high overclocking levels? There is nothing on the web. I'm a little bit confused. Peter. ADVenturePO
Hello, I wanna try overcklocking the I9 9900kf with DICE. I would like to know: which voltages do I have to rise besides the standard voltages for ambient cooling. And which maximum voltages would you recommend? Vcore max? And else?
Hi OCers! I need a bit of tips, not for benchmarks but in fact for maximum stability in a long period of time running under stress. What I have : i9-7960x, Sage WS 10G, 128GB RAM G.Skill Trident Z CL16, and 4 RTX 2080 TI. This config is stable, but system was hanging at 1.9 CPU input voltage - I've changed to 1.95. Haven't really move VCCIO 1.1 & VCCSA beyond 1.15 - low because this MB has PLX chips. I'm curious should I increase VCCIO and VCCSA or if it's stable should I leave it alone. I know that RAM is getting into the picture and 128 is a lot for this platform - without controllers and ECC. If You had any suggestions please share. Thanks Peter
Hi all, i've got few questions, cose i am total noob for oc and stuff... I have following : 4960x sabertooth x79 (bios 4608) 4x4 quad kingston beast 2400mhz water cooling : cm nepton 140xl seasonic 1000w plat devil13 7990 hd intel 730 ssd 480gb thermaltake v71 with 4 fans inside for good flow inside I've tried to set XMP profile 1 in bios , than xmp profile2, and bios automaticly clock memory to 2.4ghz and turn on turbo clock on processor and clock to 4ghz . And that was not stable, i've got overclocking failed msg 1/3x after bios load up , than i've got some problems during stress test / bsod showed up / couldnt pass test's etc. Now, i just turned on Performance mode in bios, and look like bios clocked this very well this time, turned on memory to 2.333mhz , and processor on 4.12ghz . I would like to ask is this temperature good / reliable for stable work : http://www.dodaj.rs/f/H/Vs/1Y3vrVlk/untitled.png i really need high speed memory for my work cose i am using it a lot ! i have tested this with intelstress test and it worked for 5minutes and everything was fine/pass test also with picalculation all was ok. But temperture was max 80on full load , and on avg. was 65-70 during full load. During my work i am not use full load i am using load on picture above. I just did XTU bench and i got 1249 mark and highest tepm 78c. It also throtelling from 1.304v to 1.296v, and 4.124mhz to 4123, but i guess thats nothing Hope to hear from you all soon Ty