zeropluszero Posted July 7, 2015 Share Posted July 7, 2015 ok, so its a voltage imbalance that causes this behaviour? Quote Link to comment Share on other sites More sharing options...
steponz Posted July 8, 2015 Share Posted July 8, 2015 Honestly vaguely remember.. play a bit.. Â Sorry couldn't help more. Â I've seen that issue on numerous chips.. refreshing would lower voltage..pentium haswell.. I would raise I think. I'm pretty much mostly x99 these days Quote Link to comment Share on other sites More sharing options...
zeropluszero Posted July 8, 2015 Share Posted July 8, 2015 yeh fair enough. dont have any DC chips, so Im assuming higher is better in this case. Quote Link to comment Share on other sites More sharing options...
ObscureParadox_3XS Posted July 8, 2015 Share Posted July 8, 2015 With steponzy here, I've only had a play with them a few times cold and every single time I had to pump them with volts on the VCCIN, not sure if they have a worse FVIR or what but seems likely considering their price. Also sorry I couldn't add anything of any value to the conversation. Quote Link to comment Share on other sites More sharing options...
zeropluszero Posted July 8, 2015 Share Posted July 8, 2015 yeh, off the top of my head i was using like 2.7vccin Quote Link to comment Share on other sites More sharing options...
Splave Posted July 8, 2015 Share Posted July 8, 2015 I forget but I think it was michal90 or one of his friends knew how to fix it and were going to tell once a contest finished Quote Link to comment Share on other sites More sharing options...
zeropluszero Posted July 8, 2015 Share Posted July 8, 2015 off to hassle michal it is then. Quote Link to comment Share on other sites More sharing options...
xxbassplayerxx Posted July 8, 2015 Share Posted July 8, 2015 Anyone have any tips for Pentium on cold that has random restarts?I've benched mine at 5.9-6.0 on ln2, and often I complete something like HWBot Prime, gives a score, and immediate shutdown just like cold bug, but the temperature might be 10 degrees off measured CB. Off the top of my head, I was using like 2.7vccin and 1.85vcore. I've found a bit more stability using slow mode switch straight after hwbot prime, but still get reboots when I'm trying to save screenshot. Â This was happening to me a ton yesterday. Got so bad I gave up Quote Link to comment Share on other sites More sharing options...
Digg Posted July 10, 2015 Share Posted July 10, 2015 (edited) 4790K L331C516 - delidded  Test @Win XP with Pi32m (+AIDA Cache/Memory Benchmark), 4c/4t, Samsung 2666CL9 Tight Subs, AiO Watercooling, Z97 OCF Started with:  4500/4500 @1.05v Vcore, 1.150v VRing, 1.70v VRin LLC5 = Pi32m Pass (AIDA not tested) 4600/4600 @1.07v Vcore, 1.170v VRing, 1.72v VRin LLC5 = Pi32m Pass (AIDA freezed), @1.10v Vcore, 1.190v VRing, 1,75v VRin LLC5 = AIDA Pass 4700/4700 @1.10v Vcore, 1.220v VRing, 1.76v VRin LLC5 = Pi32m Pass (AIDA freezed), @1.13v Vcore, 1,245v VRing, 1.81v VRin LLC5 = AIDA Pass 4800/4800 @1.16v Vcore, 1.295v VRing, 1.85v VRin LLC5 = Pi32m Pass (AIDA freezed), @1.20v Vcore, 1.325v VRing, 1.90v VRin LLC5 = AIDA Pass 4900/4800 @1.20v Vcore, 1.325v VRing, 1.90v VRin LLC5 = Pi32m Pass (AIDA freezed), @1.23v Vcore, 1.325v VRing, 1.92v VRin LLC5 = AIDA Pass   ...still testing. Edited July 10, 2015 by Digg Quote Link to comment Share on other sites More sharing options...
Digg Posted July 15, 2015 Share Posted July 15, 2015 (edited) G3258 L421B806 Â 4800/4400 @1.443v/1.310v Pi32m (XP) Â Can boot with 1466CL9 and 3000CL10. Edited July 15, 2015 by Digg Quote Link to comment Share on other sites More sharing options...
Administrators websmile Posted July 19, 2015 Administrators Share Posted July 19, 2015 4790K X449B686  Spi 32M XP 4/8 1,295v 5GHz 2400C8 mem non delidded  useless 1 Quote Link to comment Share on other sites More sharing options...
donaldduck2004 Posted July 20, 2015 Share Posted July 20, 2015 ehi guys I'd like to buy a i7 4790k to oc in my configuration.  Can you suggest me where buy it?  Where can I find a good giude to oc it?  Thanks  P.S. I can't see the merketplace posts. Is it because I'm a newbie? Quote Link to comment Share on other sites More sharing options...
Digg Posted July 26, 2015 Share Posted July 26, 2015 (edited) 4790K L423B495 (VID=1.056v) Chip is delidded, treatet with Liquid Metal and resealed.  WinXP, 4c/4t, Pi32m 2800C9  5000/4700 @1.323v  4700/4400/2600 primestable with 1.230v  IMC looking good, not tested PSC yet. Edited July 26, 2015 by Digg Quote Link to comment Share on other sites More sharing options...
GtiJason Posted August 26, 2015 Share Posted August 26, 2015 i5 4690K Batch# L418C218 Malasia Delidded CLU on die HS re installed w/ Black RTV Silicone, pre delid 5000mhz a no go on Water VID = 1.112V 4500 = 1.250vCore 45xCache = 1.285vRing 4900 = 1.395vCore 5000 = 1.428vCore 49xCache = 1.435vRing VCCIN = 1.550 Â IMC: CPU on Water, Mems Air Samsung 2800c9 tWCL:6 // SA V= +0.250 // IO A= +0.100 // IO D= +0.150-0.170V PowerChip PSC XE, 2700c8 tWCL:6 // SA V= +0.300-0.365 // IO A= +0.150 // IO D= +0.200 Elpida BDBG 2600c8 tWCL:6 // same as PSC Â Just received: i5 4690K Batch# X507C093 Vietnam Will update after install also will add 4790K Batch# X439B458 Vietnam info and G3258 Batch# 3420B909 Costa Rica 1 Quote Link to comment Share on other sites More sharing options...
Guest Digg_de Posted August 31, 2015 Share Posted August 31, 2015 (edited) 4790K - L421B985 - 1.024v - delidded (treated with Liquid Metal and resealed)  Shorts tests with 29�c ambient temperature and only AiO.  CB15 4800/4500 @1.213v  HWBot Prime 5000/4800 @1.292v  Pi32m - WinXP 4c/4t 5000/4900 @1.322v  This is not the end.  edit:  Pi32m 5250/4950/2830C9 @1.455v Vcore, 1.350v Vring Edited September 5, 2015 by Digg_de Quote Link to comment Share on other sites More sharing options...
Miszka Posted August 31, 2015 Share Posted August 31, 2015 Hi! I'm rookie and have questions about 4790K. 1/ what is the difference between L and X batch#? 2/ I can buy one of the following models: L434C290 L435C881 L444B179 X435A841 X439B273 What # should I choose? Quote Link to comment Share on other sites More sharing options...
Guest Digg_de Posted August 31, 2015 Share Posted August 31, 2015 The X-Batches. Â L = Malaysia X = Vietnam Quote Link to comment Share on other sites More sharing options...
Miszka Posted August 31, 2015 Share Posted August 31, 2015 Whitch one is better? Should I draw with my eyes closed? I have only one chanse to pick it up correctly Quote Link to comment Share on other sites More sharing options...
Guest Digg_de Posted August 31, 2015 Share Posted August 31, 2015 I don't know. I would grab the X439B273. Quote Link to comment Share on other sites More sharing options...
phobosq Posted September 7, 2015 Share Posted September 7, 2015 (edited) I just got brand new retail G3258 from 3404C573, anyone had one of those from early 2014? I thought they started from 18th week  I'll post the results later, maybe tomorrow. Edited September 8, 2015 by phobosq Quote Link to comment Share on other sites More sharing options...
phobosq Posted September 22, 2015 Share Posted September 22, 2015 Back with 3404C573 - 4700 with 1.33 @air, a potato, but not so hot, will check it on SS anyway. Quote Link to comment Share on other sites More sharing options...
Administrators websmile Posted September 22, 2015 Administrators Share Posted September 22, 2015 So much potatoes in poland - XP or what did you use for 4,7ghz stability test? Quote Link to comment Share on other sites More sharing options...
phobosq Posted September 23, 2015 Share Posted September 23, 2015 Pi32M and Cinebench 15, both XP and 7. I haven't tried XTU above 4500 yet. Quote Link to comment Share on other sites More sharing options...
Glitch_Neutrino Posted July 3, 2021 Share Posted July 3, 2021 (edited) What's this all about then? I gotta 4790k and GA-Z87X-OC Force too! Edited July 3, 2021 by Glitch_Neutrino Quote Link to comment Share on other sites More sharing options...
Sparks.nl Posted August 22, 2021 Share Posted August 22, 2021 (edited) Pentium G3258 X535C046 Asrock Z87 OCF Noctua NH-U14S air cooled, MX-4 Roomtemp: 22.5C Not delided VID: 1.0504v 4500MHz PI 32M (1800 C6-6-6 20 1T): 1.22v 4900MHz PI 32M (1800 C6-6-6 20 1T): 1.44v 5000MHz boot 1.54v --> PI 8M hangs @1.55v Edited August 22, 2021 by Sparks.nl Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.