Jump to content
HWBOT Community Forums

Gigabyte Z97X-SOC Force-PSC

Guest Bullant

Recommended Posts

On 4/26/2020 at 5:06 PM, Noxinite said:

Big necro here, but I managed to fix my Z97X Soc Force LN2 that was stuck at a POST code of 20 with basically all ram (except Patriot 2500C9 for some reason).

There is a fuse at the bottom of the left DIMM slot and I was getting weird resistance readings across it (e.g. not ~0 Ohms), so I shorted it with some solder and then my board started working normally.

Obviously; this worked with my board, but there is no guarantee it will work with yours and I am not responisble if you set fire to everything.

Fuse location:


Proof of life:


Necroing thread but just want to say thanks for sharing, my board had this issue and the fix helped it to boot again :D




  • Like 2
  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...