sabishiihito Posted September 17, 2014 Share Posted September 17, 2014 Does anyone have a quick and dirty method for binning Haswell IMC on PSC/BBSE 2600C8+? Quote Link to comment Share on other sites More sharing options...
Splave Posted September 17, 2014 Share Posted September 17, 2014 try them on out is all you can do low SA VID I heard, but I dont believe it Quote Link to comment Share on other sites More sharing options...
TaPaKaH Posted September 17, 2014 Share Posted September 17, 2014 lowest SA for PSC at 1333 8-12-8 generally works, if you have a set of PSC that can do it, that is Quote Link to comment Share on other sites More sharing options...
sabishiihito Posted September 17, 2014 Author Share Posted September 17, 2014 It's just infuriating trying to figure out if the sticks can't do the timings/speed, or CPU IMC can't handle it, especially with all the voltages you have to tweak (VCCSA, VCCIOA, VCCIOD, VDIMM, VCORE, VRING, VRIN)!! Quote Link to comment Share on other sites More sharing options...
TaPaKaH Posted September 17, 2014 Share Posted September 17, 2014 SA depends on CPU (seen many refresh chips run PSC with 0.8-1.0V, pre-refresh might need 1.2+), IOA/IOD at 1.10/1.15 is sufficient but can also work lower, Vcore/Input/Vring only matter for Core/Cache freqs, Vmem depends on kit Quote Link to comment Share on other sites More sharing options...
MaJ0r Posted September 17, 2014 Share Posted September 17, 2014 I usually leave auto SA when I try to overclock PSC, but recently I have found one 4670K that refused overclocking my PSC to 2600MHz but with Samsung that chip worked at 2800MHz Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted September 18, 2014 Share Posted September 18, 2014 Does anyone have a quick and dirty method for binning Haswell IMC on PSC/BBSE 2600C8+? I have on for sale that can do what you wish, pm me if interested. Quote Link to comment Share on other sites More sharing options...
sabishiihito Posted September 27, 2014 Author Share Posted September 27, 2014 I still can't push BBSE to 2666 but at least I managed a 2600C8 tWCL6 run with CPU and cache at 40x. Quote Link to comment Share on other sites More sharing options...
suzuki Posted September 28, 2014 Share Posted September 28, 2014 (edited) On asrock z87 matx and atx form factor should work at 2666 tight with +0.01 Sa ,+0.01 Ioa and +0.02 Iod. Sometimes when you push for more frequency on cpu SA needs to be lifted as well. Where i can see stock voltages values for imc on asrock ? If,for example i put +0.01 on SA the voltage will be ? Ps:don't leave on auto,the values which are set are crazy, sa= +300 ,ioa= + 250 and iod = + 200. Edited September 28, 2014 by suzuki Quote Link to comment Share on other sites More sharing options...
Alex@ro Posted September 28, 2014 Share Posted September 28, 2014 Stock values should be 0.800 for SA,1 V for vccio.Z97 oc formula is better because you can actually see the default values and the applied ones after you set +0.xxx. Z87 formula uefi does not show them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.