Jump to content
HWBOT Community Forums

FS-PSC (GSkill, Exceleram, OCZ)


Recommended Posts

  • Administrators


up for sale are five PSC-based memory kits, all work flawless, for further information please read the item descriptions




1. 3x2GB OCZ Platinum DDR3-200 Cl8-9-8 1,65v


Very good condition, no big tests apart from specs, seem to be average clockers that did 2400 7-11-7-28 on my old 1155 rig around, iirc they needed around 1,75-1,8v for this, lately used for 24/7 rig




2. 2x2GB GSkill Flare DDR3-2000 CL9-9-9-24 1,65v


Like all items offered tested with memtest and found to work without issues, tested a while ago for 2400 7-11-7-28 on ivy Bridge around 1,71v




3. 2x2GB GSkill Ripjaws DDR3-1600 CL7-8-7-24 1,60v


X-PSC based kit, tested a while ago on Ivy 2400 7-11-7-28 1,65v, on Haswell 2600 8-12-8-28 tight around 1,8v, 2667 tight worked as well with trcd 13 at around 1,85v



[B]4. 2x2GB GSkill Ripjaws DDR3-1600 CL7-8-7-24 1,60v[/b]


Same production date like #3, tested on ivy for 2400 7-11-9-28 1,58v, on Haswell 2667 tight subs 8-13-10-28 1,80v and below.



5. 2x2GB Exceleram VX DDR3-2000 CL7-10-9-24 1,65v


Working, very uneven, tested on ivy single 2400 8-11-8-28 1,65v and 8-12-9-28 1,7v. IIirc, I did 2600 c8 tight long ago with these, but don?t remember exactly timings and volts





1. 45 Euros+shipping

2. 40 Euros+shipping

3. 60 Euros+shipping sold to nvidiaforever2

4. not available anymore

5. 40 Euros+shipping


Items are located at germany, shipping will be around 6-8 euros normally, this depends on location and weight, I will search for best possible option. These are priced to go already, so there will be no rebates apart from shipping if you buy several items. Payment is possible with paypal or western union, buyer is responsible for fees



Disclaimer: No returns and no warranty provided by seller, this is a private, non-commercial sale.

Edited by websmile
  • Like 1
Link to comment
Share on other sites

  • Administrators

@nvidiaforever2 Kit 4 is a bit better on voltage, but if you want to run 8-12-8 for benches on air, kit 3 is better choice for you because it also boot 2667 8-12-8 and ran 1m or Aquamark for example for me. You got PM.

@Strat no problem

@noxinite Don´t contemplate it too long :D


Edit #3 sold

Edited by websmile
Link to comment
Share on other sites

  • Administrators

Last bump


Can be moved, I make sale tomorrow on which I offer my current bench psc on top of the listed kits (two kits 2700-2730C8 tight 1,9v, three sticks 2600 1,85v) and my 1,29v XP 32M 4/8 4790K boxed non delidded)

Thanks for the space, hwbot

Edited by websmile
Link to comment
Share on other sites

This topic is now closed to further replies.
  • Create New...