Skylake 6700K/6600K Batch and Serial Numbers

[Guest barbonenet]

No.....Es chip....splave chip need 1.375v for cineb at 5ghz.....this chip is undelided, maybe in the next days he will get ln2 for try it undercold

[QuantumX]

I tested L519B740 and L519B743.

 

Both VID 1.296.

 

Both XTU stable @ 4.8GHz 1.46v

 

Should be able to pass 4.9GHz at around 1.5v but limited by high temps... No delid

[kim55]

My retail i5-6600K. About scalping: http://www.modlabs.net/blogs/i5-6600k

 

[xxbassplayerxx]

Updated!

[flanker]

Im waiting now for RMA process. I can be 14 days without the chip. Hope new one will be with lower VID

Third chip is on the way.

[xxbassplayerxx]

Wow. I guess it's quite an advantage being so close to where Intel ships their RMA chips from. It's usually 3-5 days from when I ship it out to when I receive a new chip!

[Dancop]

For me it's 3 days incl pick up

[xxbassplayerxx]

I used to live in Louisville, KY where their US RMA center is. The thing is... they made me ship it to them even though I worked two miles away

 

So it still took three days back then.

[flanker]

I did RMA with local eshop Mironet.cz, so it take some time I think ...

[Achill3uS]

avoid from L524B520 6700K, horrible chip. VID 1.33v, on air 5G 1.50v not 32M stable, after delid on LN2 -160C 4/8 6.1G valid 1.90-1.95v -.-

[Guest barbonenet]

Guy, did u try to raise up pll termination voltage and pll bandwith??

[Achill3uS]

i used on ln2 1.6-1.70v pll termination

[Guest barbonenet]

We use pll at 1.8 1.9 when we was in taiwan

[Achill3uS]

cheers, good to know but i dont think this cpu will fly 3-500mhz higher from that ~0.2v pll

[Guest barbonenet]

I dont think so me too.....but next time try !!! Pll bandwith 6 or 8 ....pll termination increase the temperature of the cpu underload.....but when u are in windows u have to set 1.8v for remove the CB! U can upper that value for search some extra mhz....but the cpu going to be hotter;)

[Achill3uS]

cheers bro, will do! on the gigabyte G1 board, you have much easier job you have like 3-4 settings at all what you can raise. with loan cpu i reached ~6.5G 1.80v! it was L526 something, going to look for that batch.

[Guest barbonenet]

Uhuhu very good;))) i say only this for help....i dont want to teach no one;)

 

Cheers thanks for sharing;)

[Achill3uS]

sure, we are all here to help each other and share experience no worries bro

[xxbassplayerxx]

Updated!

[Dancop]

[ATTACH]3201[/ATTACH]

Boot 5g 1.375

Hwbotprime at 1.38v

L519b740

[xxbassplayerxx]

Cooling? Delidded? Has this golden chip been taken subzero yet?

 

dat Titanium Edition

[Dancop]

Raijintek triton 25 degrees ambient

Not delidded

Ln2 in some hpurs

[xxbassplayerxx]

Awesome. Keep us updated and thanks for contributing

[Lucky_n00b]

Hi,

Tested 10 pcs L525B503 Malaysia retail(and one ES for comparison) with three kind of tests:

1) Maximum Boot to Windows 7 64-bit, 4C/8T, 1.35V VCore

2) Maximum Cinebench R15 Frequency, 1.35V VCore (there's Vdroop to around 1.31-1.32 IIRC)

3) Lowest VCore to run 4.6Ghz Cinebench R15 4C/8T

 

*Aircooled, Noctua NH-U12S+Noctua NF-F12 iPPC-3000, 25C ambient*

 

This is the result:

 

 

All the details about the specs, methods can be found here if you guys interested(need google translate though )

 

Cheers,

Edited August 27, 2015 by Lucky_n00b

[xxbassplayerxx]

I like it! Will you be testing the better samples for higher frequencies (5GHz)?