Hi guys,

 

Please see pic below:

 

On my 980 Ti reference card, a few of the caps are missing. I was wondering if anyone could tell me what value these caps have, or, if I just simply can connect the dots instead of using a cap.

which one?

The red squared parts are missing.

I had a HD7970 without 2-3 caps and it ran @x8 instead of @x16

This one doesnt do anything anymore

I am missing one on gpu as well, they are surface mount ceramic capacitors and not all DMM's measure capacitance. Pretty sure they are made by TDK but even ones similar in size can vary. easy to replace with a good heatgun with a pencil tip or iron w a tiny chisel tip

 

http://www.mouser.com/ProductDetail/TDK/C1005X5R1C105K050BC/?qs=NRhsANhppD%2FYkaksZVkJOA%3D%3D&gclid=Cj0KEQjw75yxBRD78uqEnuG-5vcBEiQAQbaxSLEMW_XZuSUlpdNbmz7x8s4o9ZVGKQw4KDdrEIR_QekaAoe48P8HAQ

all 16 pairs of capacitors are 0.22uF 6.3v X7R

If any of last 8 pairs are damage, it will run at 8x only

If first pair are damage, it will not have a display

 

For the 0ohm, just short it

Thank you I will report back here if I replaced them.

For the 0ohm, just short it

 

Is the 0ohm the last red box on the right of his 980ti pic? Just checking to make sure I understand this correctly for future use of knowledge

Yep, all the way to the right. All the others are caps.

I just replaced all the caps. It's working fine now and with all 16 lanes

Thanks Coolice!!