Jump to content
HWBOT Community Forums

Kaveri 3DMark social club :)


Recommended Posts

Hi guys , if anyose still playing with Kaveri :) , lets share 3DMark runs ?!

Also please suggest the best drivers and operating system for maximum efficiency and maybe some tools other than amdmsrtweaker to improve the scores , would be much appreciated ! :)

Edited by Gorod
Link to comment
Share on other sites

  • Replies 94
  • Created
  • Last Reply

Top Posters In This Topic

I will start with very budget system that i had great fun playing with today ! :D

 

A6-7400K

Raijintek AIDOS with ambients around +26 C (??? 80F)

Gigabyte GA-F2A58M-HD2 , BIOS F3a

2x4Gb Samsung BCK0 single sided and 2x4Gb Dominator 2666C11

 

Vcore = 1.3375 , NB = maximum available :D , +0.30v with Extreme LLC , VDIMM = 1.50 for samsungs and 1.65v for Dominators

 

attachment.php?attachmentid=3431&stc=1&d=1446863921

attachment.php?attachmentid=3432&stc=1&d=1446863921

Link to comment
Share on other sites

I have a 7850k running in my daily rig that I post up some scores this week :)

 

Please post , i am so far very impressed with Kaveri - very nice and efficient little APU . Big improvement since my last APU i played with A10-5800K :) Not only for bench scores but also amazingly swift in gaming , when overclocked . For example 47 fps in GTA V at 1920x1080 this is some serious power for integrated graphics :0 , even runs The Witcher 3 somewhat playable at 1280x720 with 30+ fps :D

 

Anyways , let me share what i accomplished with my other Kaveri - A10-7700K (i bough 2 to play with , one 7400K and one 7700K for now :) ) :

 

A10-7700K

Noctua NH-D15 with ambients around +5 C ( 40F )

Asus A88X-PRO , BIOS 2001

2x4Gb Dominator 2666C11

 

VDDNB = 1.6375v , VCore = 1.40v , VDDR = 1.60v

 

For 3DMark 2013 i used Win10 as it gives +20 or so points increase for me , for other 3DMarks and tests Win7 . No modification of Tesselation and things like that , personally i prefer futuremark approved and validated only runs like in good old time years back :)

 

3DMark Fire Strike : 2011

3DMark Fire Strike Extreme : 980

3DMark Fire Strike Ultra : 522

3DMark Sky Diver : 7455

3DMark Cloud Gate : 8560

3DMark11 Performance : 3310

3DMark Vantage Performance : 11046

 

attachment.php?attachmentid=3469&stc=1&d=1447531408

attachment.php?attachmentid=3470&stc=1&d=1447531408

 

attachment.php?attachmentid=3471&stc=1&d=1447531638

attachment.php?attachmentid=3472&stc=1&d=1447531638

attachment.php?attachmentid=3473&stc=1&d=1447531638

attachment.php?attachmentid=3474&stc=1&d=1447531638

attachment.php?attachmentid=3475&stc=1&d=1447531638

 

attachment.php?attachmentid=3476&stc=1&d=1447531843

attachment.php?attachmentid=3477&stc=1&d=1447531984

 

I hope more colder weather to come this winter :D

Edited by Gorod
Link to comment
Share on other sites

awesome man. U must try 7870K, CPU is able to run around 4800 MHz with this ambients and GPU 12xx MHz

 

Heya Flanker :) , that sounds tempting , i will try one for sure hopefully soon ! My 7700K is very weak on CPU cores part , so far only been able to get it stable at around 4200 or so ... The graphics part is also not very strong , in room temp ambient was able to get no more than 1130-1140 on it :( No complains about IMC though DDR3-2800 with single sided Samsungs BCK0 , though efficiency is relatively poor compared to double sided RAM's @ 2600-2666

Edited by Gorod
Link to comment
Share on other sites

Here's a couple of runs I've done

 

7400k - http://hwbot.org/submission/2988322_newlife_3dmark___fire_strike_radeon_r5_graphics_1555_marks

Gpu volts was unknown because that board doesn't have a option to change it

 

image_id_1493526.jpeg

 

7870k - http://hwbot.org/submission/3037715_

Was with ice water but didn't need it for 1248 it just helped with stability a bit and gpu volts at 1.4v same as NB

 

image_id_1529151.png

 

Unfortunately I can't give out any tweaks as the CC is under way and I'd get shot but I can say drivers don't make a huge difference and windows 8 or 10 seems to be best

 

Edit: To OC I use amd overdrive and amd master tweaker

Edited by newlife
Link to comment
Share on other sites

nice ! how much volt for the gpu ?

 

had to give it VDDNB = 1.6375v , not a very strong gpu unit on that 7700K

 

I could it try quickly:)

 

Unleash the power of God-avari ! :D

 

Here's a couple of runs I've done

 

Very nice on both m8 ! Especially i like the 7400K as i have one myself and planing to play with it this weekend , cold weather on the way and no longer hot outside - its a crime not to use such rare opportunity ! :)

Link to comment
Share on other sites

gradus Big people i see ! How is life ?! :)

 

Awesome efficiency and memory clocks! You know now I'm going to have to try again with that cpu

 

:beer: and cheers , sadly it looks like no one loves :( the little guy 7400K but 2 of us on hwbot lol . So lets give it some love i say ! I am quite determined to push that thing further , much fun so far ! :)

 

Update : cold has not arrived yet , only +10 C outside , will continue tomorrow , it is expected to hit around -2C :) . Yet that drop of only 15 degrees (compared to indoor +25) was enough to push the graphics part to the next level with VDDNB = 1.70v

Wonder how high will it go under LN2 ? :D

 

attachment.php?attachmentid=3508&stc=1&d=1448181739

Edited by Gorod
Link to comment
Share on other sites

Most likely done with "air" runs for A6-7400K :)

 

A6-7400K

Noctua NH-D15 with ambients around +1 C ( 35F )

Asus A88X-PRO , BIOS 2301

2x4Gb Dominator 2666C11

 

VDDNB = 1.70v , VCore = 1.425v , VDDR = 1.60v

 

Modification of Tesselation only for Fire Strike (Fire Strike not Fire Strike Extreme and Ultra ) and Unigine Heaven Basic and Xtreme . Rest with default drivers settings (with Performance slider) .

 

3DMark Fire Strike : 1692

3DMark Fire Strike Extreme : 773

3DMark Fire Strike Ultra : 399

3DMark Sky Diver : 5439

3DMark Cloud Gate : 5605

3DMark11 Performance : 2434

3DMark Vantage Performance : 8111

3DMark 06 : 11269

3DMark 05 : 18409

3DMark 03 : 32301

 

3DMark 2001 : sadly could not find a GPU-Z version to report correct name for Kaveri iGPU part in Windows XP with old Catalyst drivers that work on XP and no point running it on Win7 , very very sad to see it abandoned :(

 

attachment.php?attachmentid=3515&stc=1&d=1448302238

attachment.php?attachmentid=3516&stc=1&d=1448301880

attachment.php?attachmentid=3517&stc=1&d=1448301880

attachment.php?attachmentid=3518&stc=1&d=1448301880

attachment.php?attachmentid=3519&stc=1&d=1448301880

attachment.php?attachmentid=3520&stc=1&d=1448301880

attachment.php?attachmentid=3521&stc=1&d=1448301880

attachment.php?attachmentid=3522&stc=1&d=1448301880

attachment.php?attachmentid=3524&stc=1&d=1448302570

attachment.php?attachmentid=3523&stc=1&d=1448301880

Edited by Gorod
Link to comment
Share on other sites

windows 10 in ide ?

 

what voltage for 1.2v apu ?

 

Windows 10 in AHCI ! :) It had problems installing with high FSB (would not detect HDD/SDD) but after installation with 100 fsb and loading fresh AHCI driver started booting with high FSB (not sure how high but tested with up to 117 and worked well) , also some of my SSD's would not work even after AHCI drivers (errors during load and windows attempting to repair) , the good old sand force ssd with Microcenter label (lol) worked and so did WD 1TB "blue" :)

 

Asus A88X-PRO is very good for memory oveclock , i've tried same CPU/RAM with Gigabyte GA-F2A88X-UP4 and could not get anywhere even close to RAM overclocks Asus did , maximum was 1296 with UP4 for me :(

 

 

 

attachment.php?attachmentid=3525&stc=1&d=1448310174

attachment.php?attachmentid=3526&stc=1&d=1448309764

Edited by Gorod
Link to comment
Share on other sites

DDR3-2800+ on Kaveri ? No problem with Asus A88X-PRO + Samsung BCK0 :)

But thats single sided RAM's , so of course much lower efficiency compared to ~ 1350 double sided --> Dominator's Platinum 2666C11 (CMD8GX3M2A2666C11)

 

Yet shows the great potential on memory oveclocks :)

 

attachment.php?attachmentid=3528&stc=1&d=1448311611

Link to comment
Share on other sites

  • 2 weeks later...

I keep this voltage at auto (its voltage of generator in FCH?). I tweak "only" voltage of CPU, APUNB, VDDA/PL, DRAM and digi control, memory timings...

 

 

DDR3-2800+ on Kaveri ? No problem with Asus A88X-PRO + Samsung BCK0 :)

But thats single sided RAM's , so of course much lower efficiency compared to ~ 1350 double sided --> Dominator's Platinum 2666C11 (CMD8GX3M2A2666C11)

 

Yet shows the great potential on memory oveclocks :)

 

attachment.php?attachmentid=3528&stc=1&d=1448311611

 

wow! How did you set in in BIOS? Wow...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share


×
×
  • Create New...