Jump to content
HWBOT Community Forums
trodas

Asus Z97-Pro (WiFi ac) not see my M.2 SSD drive

Recommended Posts

Guys and gals (?), I would certaily use some help / advices, on how to make my M.2 SSD device visible in bios of my new Asus Z97-Pro (WiFi ac) mainboard.

 

I bought this one recently, to get a new -QUIET- build for gaming and apart from 1T WD HDD & DVD-RW Samsung SH-224DB I get a 128G Samsung SM951 M.2 SSD drive. Upon inserting it into the mainboard:

 

Asus_Z97_Pro_Wi_Fi_ac_testing1.jpg Asus_Z97_Pro_Wi_Fi_ac_testing2.jpg

 

...it is getting reasonably hot (especially the first chip - controller), so it should work, yet it fail to show up in the Z97-Pro bios at al. So I cannot partition the SSD, nor start installing Win7 on it.

 

...

 

I tried to set the setting in Advanced / PCH Storage Configuration - SATA Express(SATAEXPRESS) and M.2 Configuration to directly M.2 instead of Auto, but still no help. SATA is in AHCI mode.

 

Then I on youtube looked at this video:

 

...but altrought it surely help people with the Z97 Maximus VII mainboard to make the SSD visible in bios:

Advanced / Onboard Devices Configuration and change the setting of PCI Express X4_3 Slot (Black) Bandwitch from Auto Mode to M.2 Mode. However I did not find such option in my bios...

 

Also I noticed this thread:

http://rog.asus.com/forum/showthread.php?53091-Rampage-V-Extreme-M-2-Setup-And-Windows-Installation-FAQ

 

...but this is, once again, about different mainboard - about Rampage V Extreme :(

 

So, a little help would go a long way there... Thanks!

 

 

PS. Looks like I'm not alone:

https://www.ifixit.com/Answers/View/213592/Nothing+will+make+the+Asus+Z97+Pro+M.2+device+boot,+any+ideas

Share this post


Link to post
Share on other sites

I wanted to install the Win7 on the M.5 Samsung 951 and I failed :( I tried this:

 

As this method looks very promising, however it fail to work on Asus Z97-Pro (WiFi ac)/usb 3.1 - with Samsung SM951 M.2 SSD. Rufus easily create the USB boot install Win7 Pro drive, no problemo there. However when I use the recommended bios setup, it ALWAYS reset the computer right after the "Starting Windows" message on screen appears. After that, the Asus board tell me, that it adjusted my bios settings to make the problem "go away" (it re-enable the CSM!) and then the install works, however it did not see single drive :( (all except M.2 are unpluged)

 

Latest bios are now used. Asked Asus support and get funny message, that basically says, that Asus only support following M.2 SSD drives it list there: http://www.mediafire.com/?tgzauc1phpnu21w

And the best part of the message is: "Asus do not guarantee functionality of this manboard with other that listed M.2 SSD drives." WTF ...

 

Any help will be greatly appreciated.

 

I tried different bios settings regarding the CSM, but the rule seems to be that disabled CSM lead to reboot :(

 

The guide is basically about that for the first part of Win install on M.2 SSD drive, you need to:

- completely disable CSM (Boot/CSM)

- select Secure Boot to "Other OS"

- select Key Management to "Clear Secure Bootkeys"

 

...install Win thru first reboot, then...

 

Secure Boot: Windows UEFI Mode (instead of completely disabling CSM)

Key Management: Install Default Secure Boot Keys

 

So it was sound reasonable, however it failed completely :(

Share this post


Link to post
Share on other sites

Asus support tell me, that they ONLY support the M.2 SSDs, mentioned in this pdf:

http://dlcdnet.asus.com/pub/ASUS/mb/LGA1150/Z97-PRO%28Wi-Fi_ac%29_USB_31/Z97-PRO-WiFi-AC-USB31_Devices_Report.pdf

 

Therefore only supported (according to Asus) M.2 SSDs in Asus Z97-Pro(WiFi ac/USB 3.1 mainboard are:

 

Apacer: T60 A200-M 128G

Intel: 530 SSDSCKGW080A401 80GB

Liteon: LITEON-LGT-256M6G-2280-256GB

Kingston: RBU-SNS6100S3/128GC-2260-128GB and RBU-SNS6100S3/256GC-2260-256GB

Sandisk: X110-2260-128GB and X110-2260-256GB

Samsung: MZ-NPD1280-2280-128GB (Support on ISRT 13.1)

 

None of these SSDs are particulary interesting in terms of speed...

 

 

So, bump for any solution, please?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×