Johni5 Posted March 30, 2016 Share Posted March 30, 2016 Nice one! go-go!You will win! Quote Link to comment Share on other sites More sharing options...
d0minat0r Posted March 30, 2016 Share Posted March 30, 2016 Do you have V droop on Vmem? Quote Link to comment Share on other sites More sharing options...
Rasparthe Posted March 30, 2016 Share Posted March 30, 2016 No, only mods that were done are to vMem and vCore. Quote Link to comment Share on other sites More sharing options...
d0minat0r Posted March 31, 2016 Share Posted March 31, 2016 I have asus card, i do Vmem and have vdroop from 3.3V to 3.0V. After this i conntect direct to 3.3V mem go higher from 380 to 405 but no more. I do all mods for 9800Xt but no help. Congrts for gold! Quote Link to comment Share on other sites More sharing options...
GRIFF Posted March 31, 2016 Share Posted March 31, 2016 VERY VERY NICE. 290MHZ FSB AN 3D IS VERY GOOD. CONGRATULATIONS. DO YOU HAVE ANY CHIPSET REGISTER MODIFICATION? Quote Link to comment Share on other sites More sharing options...
Rasparthe Posted March 31, 2016 Share Posted March 31, 2016 The only modification to the motherboard when this run was done was to Vdroop. The Gallatin core runs pretty well on the motherboard and the extra cache certainly helps. The memory mod only had volts up to 2.9v, this was supposed to be a test LN2 run but turned out best run of the bunch. There was no detectable droop on the memory for me, the core had plenty of fluctuations but the memory was a solid 2.9v through the entire bench. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.