Jump to content
HWBOT Community Forums

ASRock Z170M OCF funhouse


Recommended Posts

KABY Updates

 

BIOS

http://picx.xfastest.com/nickshih/asrock/Z17MOCF721B.rar

 

AFD

http://picx.xfastest.com/nickshih/asrock/AFDSetup(v3.0.92.2).rar

 

 

 

ASRock Offical Website

ASRock > Z170M OC Formula

 

NEWEGG

ASRock Z170M Extreme4 LGA 1151 Intel Z170 HDMI SATA 6Gb/s USB 3.1 USB 3.0 Micro ATX Intel Motherboard - Newegg.com

 

TOOLZ

http://picx.xfastest.com/nickshih/asrock/Z170ocftool20160421.rar

 

BIOS

http://picx.xfastest.com/nickshih/asrock/Z17MOCF121B.rar

http://picx.xfastest.com/nickshih/asrock/Z17MOCF131.zip

 

Quick Tips (thanks for easier to read version gti)

5hBZWDe.jpg

 

::Cold Bug Killer Settings

1.6 VCORE

1.4 VCCIO

1.4 VCCSA

1.65 CPU PLL Voltage

1.4 VCCPLL

2.22vColdBugKillerVolt

1.5 DMI Voltage

^These settings work for %90 of CPUs

IF you still have CB then raise VCCPLL to 1.5 then raise Cold Bug Killer Volt to 2.4.

 

Some CPUs need up to 1.8 DMI Voltage for any issues with PCIE Gen 3 but try lower first.

 

 

FIDINGS

::Setting RTL manually by hand is easy type in what you want.

B-die 4000mhz C12 tCWL9 try 49/50/6/6 or 50/50/7/6 or 50/51/7/7 or 51/51/8/7

 

 

Troubleshooting

::Post codes

00 Cold boot bug, needs warmer -Seems most around -100c to -120c for CBB

00 RTL failed -AC Off and Clear CMOS

00 CPU dead -Buy a new one

 

19 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA

23 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA

32 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA

35 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA

55 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA

b2 RTL/Mem failure -Try different RTL / timing or different vdimm or VCCSA

 

78 RTL too tight or tRCD too tight on b-die -try looser memory or RTL

 

ab After saving settings in bios -Just wait will take up to 10 seconds sometimes

 

 

:: Dual Core Locked CPU Benching

-Use Micro Code 2D or 74 in CPU Settings page

-Boot BCLK as high as you can, you are limited by the amount you can raise in the OS

-Best option is to save a profile around 130 bclk and apply it and go back to bios. Then cool down cpu in bios and apply your higher voltage and bclk only dont touch anything that will cause a full cold boot. When it fails pull the 24 pin and warm up to you CBB setting then plug 24 pin back in and go into bios. Load your 130bclk profile again apply and go back into bios and pull cpu back down again.

Edited by Splave
  • Like 1
Link to comment
Share on other sites

Thanks! But does it have anything equal to pll termination on asus? It is crucial for some cpus...

 

It does, it's called cpu cold bug killer voltage in the Asrock bios and as Allen has stated start at around 2.2v and slowly work your way up until cb is non existent.

 

I had to adjust cpu vccpll along with the above for the i3 6300 the other night but once you get these volts dialed in it's smooth sailing after that.

Link to comment
Share on other sites

It does, it's called cpu cold bug killer voltage in the Asrock bios and as Allen has stated start at around 2.2v and slowly work your way up until cb is non existent.

 

I had to adjust cpu vccpll along with the above for the i3 6300 the other night but once you get these volts dialed in it's smooth sailing after that.

 

I think, judging the voltage on Allen guide, asrock vs asus should be:

 

1.65 CPU PLL Voltage -> PLL Termination on Asus

1.4 VCCPLL -> CPU Standby on Asus

2.22vColdBugKillerVolt -> Core PLL on Asus

 

BTW Some one can help me to have one LiL Yellow for me in EU Italy? I can't find any...

Link to comment
Share on other sites

I think, judging the voltage on Allen guide, asrock vs asus should be:

 

1.65 CPU PLL Voltage -> PLL Termination on Asus

1.4 VCCPLL -> CPU Standby on Asus

2.22vColdBugKillerVolt -> Core PLL on Asus

 

BTW Some one can help me to have one LiL Yellow for me in EU Italy? I can't find any...

 

anyone want to translate to gigabyte for me?

Link to comment
Share on other sites

I think, judging the voltage on Allen guide, asrock vs asus should be:

 

1.65 CPU PLL Voltage -> PLL Termination on Asus

1.4 VCCPLL -> CPU Standby on Asus

2.22vColdBugKillerVolt -> Core PLL on Asus

 

BTW Some one can help me to have one LiL Yellow for me in EU Italy? I can't find any...

 

No it's not.

I can make a table for ASUS/ASROCK/MSI if it's ok with Nick.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...