Jump to content
HWBOT Community Forums

Recommended Posts

Posted (edited)

*Please note, due to work and other obligations, I can only ship on Saturdays.*

 

Hi Folks

 

Selling some stuff in the hopes of moving to broadwell-e.

 

- Rampage IV Black Edition #1- Fully working, no bent pins, bottom and most of the top is covered in LET, eraser remnants around the socket. Comes with pretty much all accessories including oc panel. Solid board! $250 including shipping to US48.

 

Paypal accepted. Can ship overseas but shipping would be in addition to the selling price.

 

Tia!

 

PS- Am looking for strong (top 5-ish, ideally) 775's that show 49.9 in at least 5 2D benches.

http://www.heatware.com/u/84580

 

SOLD items:

- Rampage IV Black Edition #2- Only 3 working ram slots, slots A2, B2, C2 and D2 throw 65 errors, slot C1 gives a 53 error. No bent pins, bottom and most of the top is covered in LET, eraser remnants around the socket. Comes with pretty much all accessories including oc panel. $85 including shipping to US48. SOLD

 

- 4930K #1 Very nice, full pot chip! No cb/cbb. Ran this at 1.695v in bios. Am sure with a little finesse, the next user could get more out of it than I did. $450 including priority shipping to US48. SOLD

http://hwbot.org/submission/3177531

http://hwbot.org/submission/3150085

http://hwbot.org/submission/3166822

 

- 4930K #2. This was a 6GHz+ cpu until I dropped it :( Will guarantee that it's non DOA and fully working at default but for overclocking ymmv. Don't recall what I got it stable at after the accident but iirc 5.2-ish should be fine. $200 including priority shipping to US48. SOLD

 

- 3930K #1. Fully working. Tested once to see if it could beat my 5.5 one (it didn't). Don't recall results but I'll guarantee it does at least 4.2GHz under decent water. $100 including priority shipping to US48. SOLD

 

- 2x4 GSKill Tridentx 2933 (Hynix). Good working order. Never really played with them much. One heatfin is a bit loose but totally fine. $75 including priority shipping to US48. SOLD

 

- 2x4 GSkill Tridentx 2666 (Hynix). Good working order. Never really played with or pushed them at all. $65 including priority shipping to US48. SOLD

Edited by funsoul
Posted

Hi There,

 

Could you please work out shipping cost to Western Australia postcode 6155?

 

For:

 

2x4 GSKill Tridentx 2933 (Hynix). Good working order. Never really played with them much. One heatfin is a bit loose but totally fine.

Are they available complete in box? Or just the rams?

 

I will take them pending cost of shipping.

 

Cheers. :)

Posted
Interested in:

 

Rampage IV Black Edition #2-

+

4930K #2

 

Will send MP

Replied

 

Hi There,

 

Could you please work out shipping cost to Western Australia postcode 6155?

 

For:

 

Are they available complete in box? Or just the rams?

 

I will take them pending cost of shipping.

 

Cheers. :)

 

Just the sticks. Would estimate about $20 for shipping. If you want, can get an actual shipping cost this Saturday and (if you want them) ship them the following Saturday. The other option would be for you to add $20 to the price and if shipping comes out to more than $20 I'll cover the extra. If shipping is less than $20, will send you a refund for the difference.

Posted
Make me a fair deal on CPU nr 1, no joke :)

 

Hiya Alby!

 

Too funny hehe

 

Drop me a pm with whatever you think is a reasonable offer and we can take it from there.

 

As per OP, am looking for golden 775, 1155 or 1150 cpus. If you (or anyone else) has something, please let me know and we'll figure out a deal that works for both parties.

Posted

Just the sticks. Would estimate about $20 for shipping. If you want, can get an actual shipping cost this Saturday and (if you want them) ship them the following Saturday. The other option would be for you to add $20 to the price and if shipping comes out to more than $20 I'll cover the extra. If shipping is less than $20, will send you a refund for the difference.

Can you send the 4930K #2 and 2933 ram for $300.00 USD posted?

 

Bundle deal. :ws:

 

If so, I can PayPal friends now.

Posted (edited)

Samsarulz was the first to ask about 4930K#2 so need to hear from him before we could do anything.

 

Would certainly give bundle deals dude. You're offer sounds good to me but, again, let's see what Samsa says.

 

4930K #1 is SOLD

Edited by funsoul
Posted

Ok please line me up for the 4930k if it falls through with the first bidder.

 

I will take the 2933 ram if the CPU is sold, however let's wait for the outcome. :)

 

Thanks.

Posted
Ok please line me up for the 4930k if it falls through with the first bidder.

 

I will take the 2933 ram if the CPU is sold, however let's wait for the outcome. :)

 

Thanks.

 

Lets both help funsoul. I can go with "3930K #1", if you are really interested un 4930K #2 ;).

 

Regards

Posted
Lets both help funsoul. I can go with "3930K #1", if you are really interested un 4930K #2 ;).

 

Regards

 

OK cool thanks. :)

 

funsoul, I will take the 4930K #2 and the 2933 ram at $300.00USD posted. I assume that includes tracking? Saw your PM so will PayPal funds.

Posted (edited)

Cool...thanks im_late! For normal overseas, they give a US customs number that iirc you can track until it gets to customs on your side.

 

Update: At request, added a few more pics of the fully working riv-be (#1).

Edited by funsoul
Guest
This topic is now closed to further replies.
×
×
  • Create New...