HWBOT Aquamark3 Benchmark Validation Regulations

[Christian Ney 18]

Reserved for tweaks and tips

[GeorgeStorm 305]

It may be worth editing the rules to state that it's highly recommended to disable SystemInfo as it may invalidate a result, rather than the current rather vague lack of reason.

 

I just found out the hard way and it would be nice if others didn't suffer the same fate

Edited April 5, 2017 by GeorgeStorm

[Gunslinger 282]

Junk bench, wrapper needs major work, gives constant upload errors when trying to submit.

[GeorgeStorm 305]

Junk bench, wrapper needs major work, gives constant upload errors when trying to submit.

 

Yeah that's the issue I'm having, and apparently it's because I didn't disable systeminfo.

 

Seems weird something on by default in the wrapper has a chance of invalidating the result.

[Gunslinger 282]

It's more than systeminfo for the problems I've had so far.

[suzuki 186]

Yes,i had this problems too.

Even if you disable systeminfo you will still have problems with corrupted file,the best way to be sure is to validate on spot,but the problem isif it's starting to give you at a result a broken file each time you will sace it will still be broken.

 

 

Sent from my iPhone using Tapatalk Pro

[Gunslinger 282]

If I try to submit using the GUI after getting a score, it crashes the benchmark.

[liq_met 10]

If i try to submit i get error to unvalid data,wrapper 2.5.5 .XP sp3,VC 2005,2008,2010.After deleting anyone VC equal effect.

[MrGenius 16]

Ok...I figured out what the problem is. Disabling System Info DOES NOT fix it. The problem is with the size of the verification file being too big. The way you make sure it isn't too big is by NOT ADJUSTING THE SCREENSHOT QUALITY TOO HIGH...UNLESS YOU ARE GOING TO SAVE IT AS A JPG. IF YOU ARE SAVING IT AS A PNG YOU NEED TO HAVE THE QUALITY SET AT LEAST 2 DOTS BELOW HIGHEST. Having the screenshot quality set too high while saving it as a PNG causes the verification file to be too big. If you save it as a JPG you can max out the screenshot quality setting. Again...having System Info enabled does not cause a problem. For proof see the verification screenshot of my score saved as a PNG(@ 2 dots below max quality) with System Info enabled. ashttp://hwbot.org/submission/3613535_mrgenius_aquamark_radeon_r9_280x_366793_marks

[dr4gon1 10]

Is it effected by physx

[mishgane 10]

"Invalid data file: Unable to parse the datafile" I have the same problem. Any result file, saved by system with the AM2NF3-VSTA board can't be uploaded. The Picture quality setting dones not affect to this. The file size is about 150-250 KB.

[Mr.Scott 451]

On 6/29/2018 at 5:38 PM, mishgane said:

 Any result file, saved by system with the AM2NF3-VSTA board can't be uploaded. 

Nah.

I have a million subs in with that board.

Edited July 5, 2018 by Mr.Scott

[mishgane 10]

You don't have any aquamark results for this board in your profile - http://hwbot.org/search/submissions/permalink?username=Mr.Scott

[mishgane 10]

Sorry, the search wasn't correct. You have. http://hwbot.org/submission/2707070_mr.scott_aquamark_radeon_hd_3850_agp_196143_marks

[macsbeach98 113]

Turn off sys info in Aquamark you have to do that with other hardware as well not just the AM2NF3-VSTA

[YURBAN 11]

Same Problem, i try Submit, but no affect - unable to parse data file ?! I turned System Info on/off, no affect..

[YURBAN 11]

I try to make different Resolutions on Windows Desktop (XP SP3), same problem: Invalid data file: Unable to parse the datafile

[davidescion 10]

yup can't upload results and that sucks because I spent two days tweaking settings trying to get a decent score, also scaling with multi gpus sucks, a single r9 380 scores better than two

[Plasma_Carrot 10]

To top everything off this crappy benchmark is really a CPU test with modern equipment, I'll not be bothering to waste any more time on it.

[ShrimpBrime 44]

On 7/5/2018 at 9:59 AM, YURBAN said:

I try to make different Resolutions on Windows Desktop (XP SP3), same problem: Invalid data file: Unable to parse the datafile

Try to select to save in different folder perhaps on a different drive and type in the file extension manually.

[GeorgeStorm 305]

Did you try disabling system info?