Jump to content
HWBOT Community Forums

ROG OC Showdown Team edition Stage 4 ref clock validation not being accepted


gupsterg

Recommended Posts

jab383 I tried that and I tried Chino's suggestion on ROG forum of using: valid.canardpc.com/975tx1

 

This is the error I get again same as before the night I ran the bench, then same following morning when trying again. I did have the screenie/system rig images in sub but those get removed after the error.

 

Done subs before on OC-Esports / HWBot never had this issue :/ . I'll try another run and get another validation and report back.

Link to comment
Share on other sites

For some reason you are missing the http AND https from your submission. It should have an "http://" before the URL so it looks exactly like this: "http://valid.canardpc.com/975tx1" instead of "https://valid.canardpc.com/975tx1"

 

If you remove the https:// you would think hwbot would interpret it as http:// but if that logic isn't written into the web application then it's going to interpret as it being incorrect.

Link to comment
Share on other sites

  • Administrators
jab383 I tried that and I tried Chino's suggestion on ROG forum of using: valid.canardpc.com/975tx1

 

This is the error I get again same as before the night I ran the bench, then same following morning when trying again. I did have the screenie/system rig images in sub but those get removed after the error.

 

Done subs before on OC-Esports / HWBot never had this issue :/ . I'll try another run and get another validation and report back.

 

OK, I took your link, I removed the s from https and it works. If this doesn´t work for you, clear cache and cookies or use another browser

websmile`s Reference Frequency score: 475 MHz with a Rampage Extreme

Will delete after you checked, so please give me a heads up :)

 

P.S. Please all check your results, tomorrow is deadline :)

Edited by websmile
Link to comment
Share on other sites

Thank you all for help. Just to make sure I was not nuts I tried just a straight up CPU Frequency sub on HWBot. Copy and paste of address of sub then equals fail on submit.

 

This included https://, I then changed only url from https://valid.x86.fr/chln2e to http://valid.canardpc.com/chln2e it worked. So did sub here same way and all AOK. It was more hard work getting the sub done then gaining the OC :o .

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...