Jump to content
HWBOT Community Forums
Splave

ASRock z170 MOCF lives on Coffee Lake Mods

Recommended Posts

4 hours ago, BoTSkill said:

 

Can you make one bios like this but for Asrock Z170M OC Formula?

Same thing ( with old CPU Micro-code ) also for Asrock Z170M OC Formula?

Dude, this whole thread is about MOCF! You'll find on previous pages at least few working BIOS for MOCF.

Share this post


Link to post
Share on other sites
18 hours ago, Killkernel said:

Hello Splave, as you quoted the post where is linked a modded BIOS for the ATX version of Z170 OC Formula, i modded the Zizu32 7.60 BIOS adding an old CPU Micro-code (Rev. "BC") so the R0 would not suffer of performance loss introduced with the latest "CA" revision:

http://www.mediafire.com/file/gebuv5etxjanlna/ASRock_Z170_OC_Formula_BIOS_7.60_Modded_%28Old_CPU_MC%29.zip/file

Cheers,

KK

could you make one for the mocf please :D you are a legend in my book

  • Like 1

Share this post


Link to post
Share on other sites
7 hours ago, Splave said:

could you make one for the mocf please :D you are a legend in my book

I'm no pro at this but I modded 7.51J (MOCF) and the ONLY thing I did was replace cpu microcode.
That said 99% sure the only microcode in this bios is 0906ED rev AA the first revision
Maybe someone with 9900K(S) can test real quick or extract the bios to confirm

KSmcAA.JPG.332e5cbaf7d679cf2a3b65cef87edc38.JPG

7.51JrevAA.bin

  • Like 1

Share this post


Link to post
Share on other sites
19 hours ago, Splave said:

could you make one for the mocf please :D you are a legend in my book

Hello Splave, here it is: https://www.mediafire.com/file/loa5mpu5nqmfn2h/Splave_Z17MOCF7.51G.zip/file

and these are the mods:

 ASRock-Z170-M-OC-Formula-7-51-G-BIOS-Mod

I've taken your previously modded BIOS (that we know is perfectly working) and:

- i've updated the OROMs to the latest versions, in particular the RAID OROMs are working and are tested by my-self (https://www.win-raid.com/t19f13-Intel-EFI-quot-RaidDriver-quot-BIOS-Modules-52.html#msg97820),

- added the R0 CPU Micro-code,

- the BIOS contains the CPU micro-codes which according to specialized forums (whose results for the 8xxx series have been personally tested and for the 9xxx series have been confirmed by friends) are the best for overclocking (on average on different motherboards and with different CPUs), in particular for the performance and the VCore applied in relation to the frequency managed, compared to the previous and subsequent CPU micro-codes.

Cheers,

KK

P.S.: you are a legend in my book... 😜 

SoniX (the U.B.U. developer) and Fernando (the chief administrator of Win-RAID) are also legends that i personally thank for the immense work they do for the HW freak community.

Edited by Killkernel
  • Like 2

Share this post


Link to post
Share on other sites
On 11/2/2019 at 4:55 PM, l0ud_sil3nc3 said:

Who's still benching Z170 in 2019?

 

 

 

5.51.922_screen.PNG

5.52.578_screen.PNG

125 bclk + a lower divider (yours looks to be 3333 setting) seems to yield good results. This gives me an idea:

Could you try 125 bclk + 3733 setting and use your cl14 timings with your Z170MOCF and 4800 Royal kit?

Share this post


Link to post
Share on other sites
17 minutes ago, Sparky's__Adventure said:

125 bclk + a lower divider (yours looks to be 3333 setting) seems to yield good results. This gives me an idea:

Could you try 125 bclk + 3733 setting and use your cl14 timings with your Z170MOCF and 4800 Royal kit?

Major no go on antique mobo.

  • Sad 1

Share this post


Link to post
Share on other sites
4 minutes ago, Sparky's__Adventure said:

Already tried?

Not with the 4800 kit(s) but other A2 and no chance unfortunately.

  • Sad 1

Share this post


Link to post
Share on other sites
Posted (edited)
On 12/26/2019 at 4:24 PM, Tsukasan said:

Hello. I'm Japanese.

I bought Z170M OC FORMULA.

and,I want to use Core i9-9900KF

Can I use i9-9900KF & MOCF ?

On 12/10/2019 at 9:31 PM, Killkernel said:

Hello Splave, here it is: https://www.mediafire.com/file/loa5mpu5nqmfn2h/Splave_Z17MOCF7.51G.zip/file

and these are the mods:

 ASRock-Z170-M-OC-Formula-7-51-G-BIOS-Mod

I've taken your previously modded BIOS (that we know is perfectly working) and:

- i've updated the OROMs to the latest versions, in particular the RAID OROMs are working and are tested by my-self (https://www.win-raid.com/t19f13-Intel-EFI-quot-RaidDriver-quot-BIOS-Modules-52.html#msg97820),

- added the R0 CPU Micro-code,

- the BIOS contains the CPU micro-codes which according to specialized forums (whose results for the 8xxx series have been personally tested and for the 9xxx series have been confirmed by friends) are the best for overclocking (on average on different motherboards and with different CPUs), in particular for the performance and the VCore applied in relation to the frequency managed, compared to the previous and subsequent CPU micro-codes.

Cheers,

KK

P.S.: you are a legend in my book... 😜 

SoniX (the U.B.U. developer) and Fernando (the chief administrator of Win-RAID) are also legends that i personally thank for the immense work they do for the HW freak community.

I tried 9900k (R0 stepping) on z170 mocf and the oc was wonderful.

you can use your cpu via this bios.  

I can speak japanese so if you wanna question, you can send me a message

Edited by asdds22
  • Like 1

Share this post


Link to post
Share on other sites
On 4/15/2020 at 8:23 AM, abner_cnf said:

Does it work on a regular ASROCK z170 OCF? Anybody have tried?

 

On 12/9/2019 at 7:32 AM, Killkernel said:

Hello Splave, as you quoted the post where is linked a modded BIOS for the ATX version of Z170 OC Formula, i modded the Zizu32 7.60 BIOS adding an old CPU Micro-code (Rev. "BC") so the R0 would not suffer of performance loss introduced with the latest "CA" revision:

http://www.mediafire.com/file/gebuv5etxjanlna/ASRock_Z170_OC_Formula_BIOS_7.60_Modded_%28Old_CPU_MC%29.zip/file

Cheers,

KK

Seems this bios will work perfectly

and you must do isolate and short pins on your cpu

Share this post


Link to post
Share on other sites
On 12/10/2019 at 9:31 PM, Killkernel said:

Hello Splave, here it is: https://www.mediafire.com/file/loa5mpu5nqmfn2h/Splave_Z17MOCF7.51G.zip/file

and these are the mods:

 ASRock-Z170-M-OC-Formula-7-51-G-BIOS-Mod

I've taken your previously modded BIOS (that we know is perfectly working) and:

- i've updated the OROMs to the latest versions, in particular the RAID OROMs are working and are tested by my-self (https://www.win-raid.com/t19f13-Intel-EFI-quot-RaidDriver-quot-BIOS-Modules-52.html#msg97820),

- added the R0 CPU Micro-code,

- the BIOS contains the CPU micro-codes which according to specialized forums (whose results for the 8xxx series have been personally tested and for the 9xxx series have been confirmed by friends) are the best for overclocking (on average on different motherboards and with different CPUs), in particular for the performance and the VCore applied in relation to the frequency managed, compared to the previous and subsequent CPU micro-codes.

Cheers,

KK

P.S.: you are a legend in my book... 😜 

SoniX (the U.B.U. developer) and Fernando (the chief administrator of Win-RAID) are also legends that i personally thank for the immense work they do for the HW freak community.

appreciate your contribution.
Tried your bios on my z170 mocf with 9900k r0 and have interesting issue(not performance issue).

When I turned off turbo boost and C-state, and OC the CPU up to 4.6Ghz, HWmonitor recognized it.but task manager didn't. The clock was locked at 3.6ghz in task manager while HWM saying that the CPU is at constant 4.6ghz.

Even that, memtest86 also can't detect my CPU oc clock and saying my CPU is at 3.6ghz while i overclocked it. (can check CPU and Memory clock while testing own memory via memtest86)

I installed the windows several times so clearly there's something happening on my hardware.Can't figure out the cause.

Share this post


Link to post
Share on other sites
10 hours ago, asdds22 said:

appreciate your contribution.
Tried your bios on my z170 mocf with 9900k r0 and have interesting issue(not performance issue).

When I turned off turbo boost and C-state, and OC the CPU up to 4.6Ghz, HWmonitor recognized it.but task manager didn't. The clock was locked at 3.6ghz in task manager while HWM saying that the CPU is at constant 4.6ghz.

Even that, memtest86 also can't detect my CPU oc clock and saying my CPU is at 3.6ghz while i overclocked it. (can check CPU and Memory clock while testing own memory via memtest86)

I installed the windows several times so clearly there's something happening on my hardware.Can't figure out the cause.

Hello asdds22!,

If I have not misunderstood you disable the Intel turbo mode, the C-state and then set the CPU multiplier to 46 ...it seems that you want apply an OC in fixed mode, is that correct ?!
 

Share this post


Link to post
Share on other sites
Posted (edited)
On 4/28/2020 at 10:56 PM, Killkernel said:

Hello asdds22!,

If I have not misunderstood you disable the Intel turbo mode, the C-state and then set the CPU multiplier to 46 ...it seems that you want apply an OC in fixed mode, is that correct ?!
 

Thanks for reply. That post was about how silly the task manager of windows 10 is (cause can't recognize real core clock)

Thanks to you and your bios, I overclocked 9900k with fixed clock at 4.6ghz with 100mhz blck. No probs and stabled oc.

benchmark score went high.

And... guess what. having several baffling errors... only when I gaming.

When I play game, especially the game made with unreal engine. tons of windows bluescreen error come out (do not means there aren't any issue with other game, almost every game crashes).

checked my overclocked memory with memtest86, checked SSD and HDD. ran tons of stress test(prime95, blender benchmark, 3dmark fire strike, time spy) and can't figure out what is the cause (even that, benchmark score tells me that the score is high and valid! )

I've been built my pc from 2014, been met several windows10 bluescreen error and I've been proud with my pc troubleshooting.

But this issue makes me confusing.

Because when the crash start, whole pc is going down. uefi can't boot in the end ( uefi tells me i have to default my uefi settings.)

i have to clear cmos and have to default the uefi and oc again then re-install windows10.

'custom uefi is based on non-ME uefi' would the issue? at this point, my insight with troubleshooting is suspicious.

Can you advise me where can I start?

Unless i play games, there isn't any issue with general pc usage. 

Edit:

I wrote this for finding helpful debug insight.

Because In here, many insightful overclocker is helping others.

I think i found the cause which crashed the game, but not at the stress test.

stress test program solely stress cpu or gpu. I tried gpu stress and cpu stress simultaneously and psu was shocked for the load and the pc restarted.

So, 600w psu(FSP AURUM S 600W AS-600) was not enough for 9900k(4.6oc) and ram oc and 980ti. That's my conclusion and will give a shot with new psu.

Can't understand why Firestrike and Timespy can't help me finding this prob.

Feel sorry writing off-topic thread. But instead of delete, leave this here for record so that maybe another guy care about his psu when use coffelake cpu with z170 mocf! :)

Edited by asdds22

Share this post


Link to post
Share on other sites
On 5/12/2020 at 9:36 AM, xgrzechson said:

Hi, do you think it can work on MSI Z170A Gaming M7 mobo with i7 8700k?

Should work without any problem after Bios mod

Share this post


Link to post
Share on other sites
Posted (edited)

ASRock z170 MOCF lives on Coffee Lake Mods

That's the title of this thread. Lets keep it nice and clean and don't start a request thread for various boards. :)

If someone with a different motherboard needs some info on this topic, I can recommend this video from Luumi: 

 

Edited by octra

Share this post


Link to post
Share on other sites
On 5/17/2020 at 10:36 PM, Zizu32 said:

Should work without any problem after Bios mod

 

I bought a i7 8700k, modded the bios with revlaay tool and isolated 2 pin-pads with kapton tape (the same tape which sellers on aliexpress using for stickers to "Xeon to 775" mod).

But I have a question. Did I isolated correct pin-pads (image below)? Do i have to isolate more of them?

My motherboard is MSi Z170A Gaming M7

I found in Google the "CoffeeTime socket pinmod map" and I've used it to isolate these pin-pads.

Link 1 (isolated pins): Imgur 1

Link 2: (pinmod map): Imgur 2

Share this post


Link to post
Share on other sites
Posted (edited)

Got it working on asrock Ddr3 board with this tool, even on 9900k you can run Ddr3 https://www.win-raid.com/t3987f16-TOOL-Easy-automated-Mod-tool-for-Coffee-Lake-bios.html

No idea how the vrm will handle xoc tho, lolh

Https://hwbot.org/submission/4511090_yosarianilives_3dmark___fire_strike_(graphics_score)_uhd_graphics_630_(24eu)_1505_marks

Edited by yosarianilives
  • Like 1

Share this post


Link to post
Share on other sites

When I putted my 8700k in, I get every time Debug Code 46. Can someone explain me what I'm doing wrong? 

1. I've modded bios using revlaay tool, later CoffeeTime 

2. I isolated pins for U0 scheme without shorting SKT_OCC to the ground. (I made some research and I learnt that MSI mobos doesn't use SKT_OCC for checking CPU)

Share this post


Link to post
Share on other sites
On 7/30/2020 at 6:05 AM, yosarianilives said:

9900k on DDR3. what the fuck. Ridiculous, I love it. Have you tried OCing DDR3 with a 9900k yet?

Edited by 4n0nym0u5b3nch3r

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...