Jump to content
HWBOT Community Forums
Noxinite

[EU] Binned 775, 754, 478, water cooling fittings

Recommended Posts

Bump.

Added Team Group Xtreem 4x4GB quad kit 2600C10 Samsung d-die (binning results from ages ago, they have been sitting in my daily since then).

457636852_TeamGroup2600C104x4GB.thumb.png.f0f6eb8dd7176155f315b3fef7fb6745.png

And added 7700K which is very average, it does >5.1GHz R15 @<1.40V on water, >5.4GHz on weak phase and around 6.4GHz R15 at full pot:

1577511923_7700KSale.thumb.png.82929a6f5517bca66b27aaa4568306f3.png

https://hwbot.org/submission/4047449

image_id_2126899.png

Edited by Noxinite

Share this post


Link to post
Share on other sites

Bump, updated OP with g-die 32M binning numbers and 7700K 5GHz R15, screenshots below.

G-die binning settings:

6-1_96V.thumb.png.b07f66c1cb4297a104001b844974bbd3.png

7700K 5/4.5GHz R15 @1.270V (checked with multi-meter). Delidded with MX-4 on the die and IHS.

snap-01.03-05_42.thumb.png.2464b57d370f173fa06d97a46ff616aa.png

Edited by Noxinite

Share this post


Link to post
Share on other sites

Updated and cleaned up the OP a bit. 1GB G-die removed and two higher binned E2140 added.

E2140 L722A970 - with lapping, delid and liquid metal it does 3850MHz R15 @1.45V on water. FSB scales with cold, but core doesn't seem to. I should have a screenshot of that, as I only tested delidding it a month or so ago.

Share this post


Link to post
Share on other sites

Bump.

Are people wanting more proof of fsb/core for the binned chips?

Share this post


Link to post
Share on other sites
On 6/24/2019 at 2:35 AM, unityofsaints said:

PM'd for the Semprons and quad kit

Sold & posted.

Updated the OP, only the follownig left now: 4x E2140, 5x E2160, 2x Pentium 4 2.8GHz, 3x Athlon 64 3000+, 2x Kingpin K-type probes, and 12x 10/13mm compression fittings.

Share this post


Link to post
Share on other sites

×
×
  • Create New...