Jump to content
HWBOT Community Forums

[Worldwide] PSC & E2140/E2160


Noxinite

Recommended Posts

Hello people, finally getting around to actually listing some of the binned stuff I've had sitting around for over a year without touching. :P I have better chips, so I should probably sell the spares.

Prices are negotiable and not including postage. For postage, most things are probably <£5 for UK and <£10 for EU at most via Royal Mail (if you want a different carrier we can discuss). For payment I accept Paypal.

PSC binning details at the bottom of this post.

Disclaimer: Your OC results will vary, items are located in the UK & prices are in GBP.

2020_02_23.PNG.ca4393c6794d4d9382c216c52073621f.PNG

IMG_20200223_131827.thumb.jpg.34ae051fa5ebfde4a1808472a1f56d48.jpg

IMG_20181015_215021__01.thumb.jpg.fb17e4ca75d119122a003c9cdc94a248.jpg

IMG_20190908_173813.thumb.jpg.ebe19a65a45f5cc093b830f70957f6d4.jpg

PSC Binning

  • Tested on ambient (without heatspreaders) with ambient CPU.
  • Tested at 4/40 IOL/RTL (instead of 4/41).
  • Timings as shown (almost as tight as possible).
  • The Ripjaws had RP weakness, so dropping to 9 might drop 32M stable voltage.
  • The Ripjaws also required RCD13 for 2666MHz 32M.
  • The Trident 2000C9 have KO-8117 PCB.
  • The 1600C7 Ripjaws have ST PCB.
  • Voltage is as shown in HWInfo and checked with multimeter (both OCF and Impact overvolt above BIOS).

Stick 4:

555961346_Stick4-1_930V.thumb.png.ab153fbf3abc705ee75c9198eefe44af.png

Stick 2:

635792903_Stick2-1_940V.thumb.png.d3eb79b4f438b73ce45a838b9044289c.png1988708299_Stick4-1_950V.thumb.png.cac47aefce45a6b876a9cc4004aea9be.png

Stick 7:

1736364662_Stick7-1_915V.thumb.png.ee2b263bbbc3b02010aa9e43b2c5f71b.png

Stick 10:

1173046016_Stick10-1_920V.thumb.png.b0e1bda3c295ce6dd68a47b13454761e.png

Edited by Noxinite
  • Thanks 3
Link to comment
Share on other sites

21 hours ago, AutisticChris said:

@Noxinite Do you have any more info on these sticks? PCB?

Samsung OEM pcb.

21 hours ago, ground1556 said:

How good or bad are the binning rejects? Are you keeping any of the 1 GB sticks for max frequency? 

I have no reason to keep the 1GB for max freq as I have good MFR and CFR but I feel like they might be fun. :D

I'll make a thread to discuss the G-die (https://community.hwbot.org/topic/186190-samsung-ddr3-g-die/).

Bump for the things I'm actually selling.

Edited by Noxinite
  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 4 weeks later...
Guest
This topic is now closed to further replies.
×
×
  • Create New...