[WTB]DDR3 PSC

[quiekMew]

Hello,

Im looking for four PSC based ddr3 sticks 

 

Ideally id want the sticks to be from the kits listed below but if they are a similar bin, id happily take those as well. 

F3-17600CL7-2GBPIS (1100MHz 7-10-10-28-40-2T at 1.65V)

F3-19200CL8-2GBPID (1200MHz 8-11-8-28-42-1T at 1.65V) 

F3-16000CL6-2GBPIS (1000MHz 6-9-6-25-40 -1T at 1-65V)

F3-17600CL7-2GBXHD (1100MHz 7-10-10-28-48-1T at 1.65V) 

 

Location is Germany, id like to pay with Paypal 

[bolc]

Hi,

looking for psc for intel or amd benching? any specs in mind?

currently have a kit 2x2 gb of g.skill PI 2000 (16000) CL7 for sale, you have frequency / first timings / voltage for each stick to pass spi32M

tested timings are

8-11-8-28-1t     4-88-10-4-26-3-4-7    4-5-4-15-5-4-4-4-4-11-11-10   tref auto or
8-12-8-28-1t     4-88-10-4-26-3-4-7    4-5-4-15-5-4-4-4-4-11-11-10   tref auto

cheers

Edited November 2, 2018 by bolc

[quiekMew]

Hey,

yeah for x79 benching 

 

specs as above, they should be roughly in that performance span

i already have six sticks of dominator gt rated at 1000MHz 8-9-8 but those dont do the 2400MHz PSC tight profile on air so i want some better sticks. 

 

Edit: Had the wrong timings in my head, corrected them from 7-8-7 to 8-9-8

Edited November 2, 2018 by quiekMew

[suzuki]

You have pm sir .

[quiekMew]

1 hour ago, bolc said:

currently have a kit 2x2 gb of g.skill PI 2000 (16000) CL7 for sale, you have frequency / first timings / voltage for each stick to pass spi32M

tested timings are

8-11-8-28-1t     4-88-10-4-26-3-4-7    4-5-4-15-5-4-4-4-4-11-11-10   tref auto or
8-12-8-28-1t     4-88-10-4-26-3-4-7    4-5-4-15-5-4-4-4-4-11-11-10   tref auto

cheers

Just saw that you edited your response with the OC results for the PIs 

if you had two more of those sticks id be interested but ideally id want two of the same kits (so 4 sticks total). 

i appreciate your offer tho   

[quiekMew]

1 hour ago, suzuki said:

You have pm sir .

replied 

[bolc]

on x79 do you need / can you even do 2400 on the ram ...?

i have a 4x2 gb kit of gskill pi 2200c7 917600 cl7) as well



timings same as above
2 are fairly serious with 2600 cas8 very tight below 1.9 V, and the 2 less good do 2400c8 at 1.75 V dual channel. the other 2 will do it below 1.75 but have not tested which exact voltage they need

[quiekMew]

my 4930k is spi32m stable with 3000MHz Cl12 single sided MFR in quad channel. that ram starts to scale negativley at ~1.95V which is required to get over 3050 so i dont know how high it can go. i get higher scores with quad channel psc at like 2200mhz (which is where those sticks kinda max out) so i want better psc for benching 

 

Ill pm you about the ram 

Edited November 2, 2018 by quiekMew
forgot an it

[bolc]

I am about to boot my M7R which can handle very high ram freq on psc at cas8. do you want a screen of some sort for those?
i will make spi32m for each at 2400, easiest for now. first goes at 1.70 V...
let me know in pm
++
 

Edited November 2, 2018 by bolc

[bolc]

here are the screens, each going through spi32m individually.

I am having the "worst" 2 running in dual channel at 1.75 v as I speak. the small difference in voltage is mostly due to the motherboard and cpu imc I think, not the rams
 

[quiekMew]

Got what i was searching for, can be closed

Thanks for the space HWBOT