Jump to content
HWBOT Community Forums

Recommended Posts

Posted (edited)
28 minutes ago, KaRtA said:

So no need for FW update? I have still got Z97 firmware installed on mine I beleive

Plug&play, mine from RIVBE or M6E boards

Edited by dumo

Share this post


Link to post
Share on other sites

Epic news, looks like I am modding at last then. Flashing and bricking it has scared the crap out of me so I have avoided.

Share this post


Link to post
Share on other sites
3 hours ago, dumo said:

No need to update ocp1 just need to connect this

 

Screen Shot 04-16-19 at 02.01 AM.PNG

 

Thanks Dumo ! Looks like you ended up getting Apex XI after all huh

Share this post


Link to post
Share on other sites
28 minutes ago, GtiJason said:

Thanks Dumo ! Looks like you ended up getting Apex XI after all huh

Definitely Jas. Kinda late but it is an upgrade from my old M8I with dried vaseline😃 

Too bad..no stock at our local micro center

Share this post


Link to post
Share on other sites

I just can't understand my apex 11.

I've put bios 903 and started to tweak the ram, and i opened a window to lower the room temp.

After 20 min of tweaking ram started to pass gb3 @ 4180 12.11.11 1t tight. It passed 6 runs in a row. Room temp was about 22C. I went to smoke and i returned after 6-8 minutes and run gb3 again... surprise... doesn't work anymore, crashes at djakstra test...

Any idee what to tweak to make it stable? (ram si A1 layout)

  • Confused 1

Share this post


Link to post
Share on other sites
Posted (edited)
On 4/6/2019 at 3:09 AM, FireKillerGR said:

 

new oc panel port.png

thank god for this post
had been trying to push my 9700k on a Gene XI
 was it was hard with out my old buddy OC Panel II


time to get the soldering gun out !

we'll see if can get this bad boy running again
will post results

holyquest.jpg

Edited by joje2
  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited)

Guys, BIOS 0050. Do u have same issue as me?

If I do not set SVID Support on "auto", I can not boot do WIndows 7, frozing every time in Windows logo. WTF? Im sure, with earlier BIOS was not problem change the SVID disabled for OC :)...

 

26.4. updates//

Of course, if I have SVID on AUTO, my manaul Vcore voltage doing nothing...Eg. 1.25V booted to WIndows, Cinebench frozed immediately at 5GHz, 4.9 GHz and also oat 4.8 GHz.

If I have vcore on auto, Im ok on 4.8 and 4.9 GHz. 5 GHz after few seconds frozed

So I tried adaptive and also offset. The same, if my CPU is in load, Vcore going to stock voltage :), thats 1.17V (CPUZ+multimeter confirmed)

 

 

Edited by flanker

Share this post


Link to post
Share on other sites
On 4/16/2019 at 1:19 PM, miker2ka said:

I just can't understand my apex 11.

I've put bios 903 and started to tweak the ram, and i opened a window to lower the room temp.

After 20 min of tweaking ram started to pass gb3 @ 4180 12.11.11 1t tight. It passed 6 runs in a row. Room temp was about 22C. I went to smoke and i returned after 6-8 minutes and run gb3 again... surprise... doesn't work anymore, crashes at djakstra test...

Any idee what to tweak to make it stable? (ram si A1 layout)

Increasing VCore it helps sometimes.

Share this post


Link to post
Share on other sites
On 4/23/2019 at 4:58 PM, flanker said:

Guys, BIOS 0050. Do u have same issue as me?

If I do not set SVID Support on "auto", I can not boot do WIndows 7, frozing every time in Windows logo. WTF? Im sure, with earlier BIOS was not problem change the SVID disabled for OC :)...

 

26.4. updates//

Of course, if I have SVID on AUTO, my manaul Vcore voltage doing nothing...Eg. 1.25V booted to WIndows, Cinebench frozed immediately at 5GHz, 4.9 GHz and also oat 4.8 GHz.

If I have vcore on auto, Im ok on 4.8 and 4.9 GHz. 5 GHz after few seconds frozed

So I tried adaptive and also offset. The same, if my CPU is in load, Vcore going to stock voltage :), thats 1.17V (CPUZ+multimeter confirmed)

 

 

with BIOS 0093 issue was fixed. Still, it has no logic. Many guys wrote me, they have not issue to boot into the Windows with 0050 with manual voltage tweaking and SVID disabled. But I think they have ES 9900K, can someone test it with retail 9900K?

  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited)

Any hope for a mod to run 6th and 7th gen cpu on maximus 11? For those of us who can't afford to keep multiple platforms?

Edited by miker2ka
  • Haha 2
  • Confused 1

Share this post


Link to post
Share on other sites
Posted (edited)

please image iso ,img win 7 and win 10

 

Edited by barti27

Share this post


Link to post
Share on other sites
Posted (edited)

Test

Screen-Shot-05-09-19-at-01-46-AM.png
 

With Duck Oc sets

Screen-Shot-05-08-19-at-11-00-PM.png

Edited by dumo
  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites
5 hours ago, dumo said:

Test

Screen-Shot-05-09-19-at-01-46-AM.png
 

With Duck Oc sets

Screen-Shot-05-08-19-at-11-00-PM.png

No matter what platform is, always the same ROG walpaper since 2012 i guess :D really interesting 4133C17 bin can reach that high compare to 4266C19 :) any good news for XP bios om?

Share this post


Link to post
Share on other sites
On 5/9/2019 at 7:25 AM, ivaneza said:

No matter what platform is, always the same ROG walpaper since 2012 i guess :D really interesting 4133C17 bin can reach that high compare to 4266C19 :) any good news for XP bios om?

The same rog wallpaper since RIVBE Van :)

4266C17 also decent clocker. Dunno about XP bios..

  • Like 1

Share this post


Link to post
Share on other sites
On 2/1/2019 at 6:06 AM, suzuki said:

Any difference in voltage used for same freq on Gene vs Apex ?

I don’t see difference at all , the only one is the pwm is much stronger on apex and heat to much less than gene, and also the heatsink it’s also stronger and bigger.

  • Like 1

Share this post


Link to post
Share on other sites
10 hours ago, miker2ka said:

Anybody tested bios 1005 on apex? It seams to perform worse on my a1 kit. 

Tested few minutes and sensitive  better over 0805 on rams air, with A2 atm 

Share this post


Link to post
Share on other sites

Finally, i figured it out. It wasn't bios or board that limited my ram, it was cooling. My ram doesn't like room temps above 21C.

With 21C and a delta on them, voila :

 

4200.thumb.png.318e736b105277e2f3731742171a49f5.png

Share this post


Link to post
Share on other sites

Cleared for i9 - won´t work even with better mems with 8th gen at least for 4266 1T ;) - so don´t set hopes to high unless you upgrade and find a decent imc. Nontheless good to see Dumo running G.Skills again :D

Share this post


Link to post
Share on other sites
9 minutes ago, websmile said:

Cleared for i9 - won´t work even with better mems with 8th gen at least for 4266 1T ;) - so don´t set hopes to high unless you upgrade and find a decent imc. Nontheless good to see Dumo running G.Skills again :D

Im waiting for those Klevv and Crucial sticks :)

  • Like 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...