Jump to content
HWBOT Community Forums
AutisticChris

[FS] Cheap B-Die

Recommended Posts

The model is F4-4266C19D-16GTZA. They've only been used for about an hour, tested to function. I have original packaging, just not on me atm.

Asking $225 $200 $190 $175 including shipping to US, more than happy to pay the fees for PayPal Goods & Services myself.

OC tests hopefully coming nearer to Christmas, if I can get my rig completed and figure out how to install XP on a partition. No promises yet though.

Does 3866 12-11 220 1t at 1.85v, 0.83vtt. RTLs auto. Doesn't scale any higher for some reason, could be board, could be kit.IMG_20181208_194525093.thumb.jpg.b286e2346611863b41c34b64022067ba.jpgIMG_20181208_194545631_LL.thumb.jpg.143d99fbc66dff8df3523648064d8bf0.jpg1116685993_386612-11pass.PNG.f21e2bb055f05706762d07540c2f7e59.thumb.PNG.26cf7f3f30daf441b797a0e0b04cd31d.PNG

Edited by AutisticChris
  • Like 2

Share this post


Link to post
Share on other sites

Kit is still available. Nobody interested, or waiting for tests? Still waiting for cooler to arrive from Canada, hopefully it should arrive soon.

Edited by AutisticChris

Share this post


Link to post
Share on other sites

dont want to be rude but, youve been trolling around the whole marketplace since months about asking for results from anybody without even willing to buy anything and now you put something up fs without a single screenshot... seriously dude.

  • Like 2
  • Thanks 2
  • Haha 1
  • Confused 1

Share this post


Link to post
Share on other sites
33 minutes ago, Achill3uS said:

dont want to be rude but, youve been trolling around the whole marketplace since months about asking for results from anybody without even willing to buy anything and now you put something up fs without a single screenshot... seriously dude.

Thanks, will remember your advice. I have been pretty hyperactive recently :P

Edited by AutisticChris
  • Like 1

Share this post


Link to post
Share on other sites

Update on testing:

Have my setup now, but having odd problems. 3866 12-11 1t tight 1.85v tight posting consistent on Impact but can't make it to os :( Idk if bad kit or lack of OC knowledge.

Will dive deeper into settings this weekend. Not touching 32m yet, only gb3.

Edited by AutisticChris

Share this post


Link to post
Share on other sites

Do you have your maxmem set or are you trying to boot into the OS with all 16GB available?

\

  • Thanks 1

Share this post


Link to post
Share on other sites

reset the cmos, allow it to boot back into the os , set what you want on and off in the bios,  if it does  then increase your cpu mhz by multiplier , in turn that will increase ram speeds, when it doesnt boot , then drop your ram speed to then next lower mhz of the ram , then go back to the ram speed,  when you get as high as you can go on both cpu and memory you will may  have to increase the voltages on both, try to do it with as low voltage as possible,  it is a good simple way to test both cpu and memory to give you an idea of what they are capable of doing basically at stock settings, then you can start tweaking the both as you have a guideline on what they can and will do, save it in your bios profile settings so you can boot straight back into those settings then you can go from there

  • Like 1

Share this post


Link to post
Share on other sites

look, read the name ...AutisticChris

i had a go too some months ago then i realised, when people are austistic, they can either do it quickly or it doesnt compute and depends on the disability severity ... give him a go and help him, least hes got the balls to have a go with a disabilty, like that , more than i can say for a lot here and other places , did you ever stop and think hes busting his ass to try get things right ??, wheres your heart ???

 

  • Thanks 1

Share this post


Link to post
Share on other sites

@ozzie This is a sale/learning thread, not a pity thread XD

In all seriousness thanks, learning to OC still easier than honors english.

Edited by AutisticChris

Share this post


Link to post
Share on other sites

i know, i didnt start it, i just replied, as you and  gunslinger  did, if youre  having  problems then start a help thread about it !!!!

  • Like 1

Share this post


Link to post
Share on other sites

Type msconfig in start, go to advanced boot and set maxmem to 3000 or less. This will allow you to go into windows at aggresive settings.

  • Thanks 1

Share this post


Link to post
Share on other sites

Thank you everyone for the advice, it has helped me much.

1.85vdimm, 0.83vtt. Not minimized.

Can't seem to post any higher. Idk if board or mem limit.

3866 12-11 pass.PNG

Edited by AutisticChris

Share this post


Link to post
Share on other sites

Leave vtt ram at 0.93,push the voltage to 2v.

Increase the ram freq from windows utility kit if straight boot doesn’t help.

  • Thanks 1

Share this post


Link to post
Share on other sites

@suzuki Ram doesn't seem to like vtt any higher, will try again tonight.

Interestingly enough the profile here cold boots straight to windows no issue, with Maxmem set properly.

Edited by AutisticChris

Share this post


Link to post
Share on other sites

I highly doubt that you reached the limit of your vtt.

Interesting fact,i play with vtt values from 0.90 to 0.95 on different freq and it passes certain bench.

For ex, 4133 works with 2.0v /vtt 0.937, 4160 with 2.05/vtt 0.950 , and 4200 with again 2.06 /vtt 0.931.

Play with these back and forward,my 8700k also needed 1.26 vccio for max freq,tested on Gb3 ,on 1.23 wasn’t stable anymore.

 

Edited by suzuki
  • Like 3

Share this post


Link to post
Share on other sites

Have you got your IOL/RTL's set properly? 49/50/6/6 for 4K & 50/51/6/6 for higher. And it's not the IMC, you have my screens of that chip running 4133 12-11 on mocf.

Vdimm @ 2.0V real

VTT @ 0.850 - 0.900V

IO & SA @ 1.35V 

These settings should work for 4K 12-11 at the very least. BTW have you tried running 12-12 first to see if it'll post at higher speeds? I know one of my kit's will not boot straight 4K 12-11 but it'll do up to 4133 12-11 fine if I first boot it at 4K 12-12.

Share this post


Link to post
Share on other sites

@DR4G00N @suzuki I tried higher vdimm and vtt. Tried 4k 12-12 as well. Neither worked. Rtls auto here.

I haven't tried to bclk up in os. I also can't remember if the igpu was explicitly turned off. I'll give it some more time this week.

Share this post


Link to post
Share on other sites
1 hour ago, speed.fastest said:

There is b die which dont scale above 1.9v and dont like high vtt even i've seens as low as 1.65v for superpi 32m waza.

How you discover that it can be so low ?

Share this post


Link to post
Share on other sites
8 hours ago, suzuki said:

How you discover that it can be so low ?

Probably worst kit ever, 3600 13-13 32m waza and 3733 13-13 geekbench, it can boot 12-12 but unstable.

  • Sad 1

Share this post


Link to post
Share on other sites

I tested everything y'all said, and some other things as well. Nothing worked.

Price drop $200 flat shipped in the U.S. Don't need this kit anymore, gonna look for a better board and kit.

Edited by AutisticChris

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×