Jump to content
HWBOT Community Forums

Challengers 2019 Round 1


Leeghoofd

Recommended Posts

  • Crew

Div VII : Intel legacy: LGA1150 or older  socket with a 4703MHz + Pos. CPU Temp limitation
GPUPI 100 v3.2
3DMARK11 PHYSX
(ver link required)
X265 1080P
PI32M

DIV VI: AMD legacy: AM3+ or older socket with a 4503MHz + Pos. CPU Temp limitation
GPUPI 100 v3.2
3DMARK11 PHYSX
(ver link required)
X265 1080P
PI32M

DIV V: Dual core only 5003MHz speed limit
GPUPI 1B v3.2
Cinebench R15
X265 1080P
PI32M

DIV IV: Quad core only 5203MHz speed limit
GPUPI 1B v3.2
Cinebench R15
X265 4K
PI32M

DIV III: Hexa core only 5303MHz speed limit
Geekbench4 Multi core
Cinebench R11.5
X265 4K

3DMark 11Physx (ver link required)

DIV II: Octa core only 5403MHz speed limit
Geekbench4 Multi core
Cinebench R11.5
X265 4K

3DMark 11Physx (ver link required)

DIV I:  5503MHz speed limit
Geekbench4 Multi core
Cinebench R11.5 (divided per core)
X265 4K

3DMark 11Physx (ver link required)

 

Can everybody live with the above? The temp limit for Div 6 & 7 is only positive temp on the CPU at idle and load. What cooling you use is you choice, no limits on memory cooling.

For all subs HWinfo must be used during the run and ofc displayed in the verification screenshot

Edited by Leeghoofd
  • Like 11
  • Sad 1
Link to comment
Share on other sites

13 hours ago, KaRtA said:

Not sure you are aware, but:

(a) rare as fuck

(b) high possibility that the chips cannot do 4.5g on ambient temps 

 

so zero care given 

haswell/DC are the only real chips for this. 

Agree withnt countryman, why not have open cooling on RAM, ambient on cpu is fine, could make it interesting 

4980hq will 100% do 4.5 on ambient, it's just Haswell with l4 cache and should be the ideal cpu for that stage assuming the double package doesn't screw mem over too much (it may) 

  • Like 1
Link to comment
Share on other sites

I do see the MHz limitation with that being the only limitation shown for DIV I.

From the way it's layed out ATM I take it Div I is well, for anything right?

I know there should be something specific here but it's not saying what it is (For now anyway).  ?

Edited by Bones
  • Like 1
Link to comment
Share on other sites

  • Crew
39 minutes ago, Noxinite said:

Would it be possible to have a definitive ruling on any limitations to memory temperature (in temp limited divs)?

if the rules mention only CPU temp, what do you think it means regarding mem temps?

1 hour ago, yosarianilives said:

4980hq will 100% do 4.5 on ambient, it's just Haswell with l4 cache and should be the ideal cpu for that stage assuming the double package doesn't screw mem over too much (it may) 

Only DT parts, no mobiles

1 hour ago, Alan_Alberino said:

When are they expected to start? No 3D? Only 1 division per user?

15th of february, stages are not 100% final. Only 2D first round, 3D is round 2, mix 2/3D in round3... for the divisions per user I 'm awaiting final word by Frederik for points

Edited by Leeghoofd
  • Thanks 1
Link to comment
Share on other sites

  • Crew
1 hour ago, Bones said:

I do see the MHz limitation with that being the only limitation shown for DIV I.

From the way it's layed out ATM I take it Div I is well, for anything right?

I know there should be something specific here but it's not saying what it is (For now anyway).  ?

I will leave out the latest and greatest socket for Div1 and even Pro

 

8 minutes ago, superV said:

yes,and it's the champion for the vii ? at 4.5 kills everything

can it run 4500 on ambient temps ? can it run high mem speeds ?

Edited by Leeghoofd
Link to comment
Share on other sites

4 minutes ago, Leeghoofd said:

so we raise the bar to 4700MHz

yikes

that's cheating,it doesn't boot more than 4.5/4.6 on ambient
the 5775c is very powerful, it's pretty much 7700k at 5ghz performance at 4.4/4.5ghz with much lower latency.

but still not at it's peak ,splave is egoist, doesn't want to share his asrock virus.

in theory should work on z170 too  since is on 14nm and i'm 100% sure will work with ddr4,since the 8700k does with some mods.

made a thread here

 

  • Confused 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...